No subject

[Дмитро Шевченко]

Hello!
My new usb-flash disk (GreatWall 128M) dont working.
Any time I attach it:
umass0: vendor 0x09a6 product 0x8001, rev 1.10/1.00, addr 2
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <\263\244\263? USB Flash Disk 1.06> Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: 127MB (261888 512 byte sectors: 64H 32S/T 127C)
umass0: Phase Error, residue = 0
(da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0

/dev/da0 apper after many (~15-30min) time.
/dev/da0s1 dont apper.

dmytro# uname -a
FreeBSD dmytro.local.bsd 5.4-RC1 FreeBSD 5.4-RC1 #0: Fri Apr  8 23:46:17 EEST 2005     dmytro at dmytro.local.bsd:/usr/obj/usr/src/sys/my_light  i386

dmytro# camcontrol devlist
<ATAPI-CD ROM-DRIVE-52MAX 52B4>    at scbus1 target 0 lun 0 (pass0,cd0)
<_NEC DVD_RW ND-3500AG 2.16>       at scbus1 target 1 lun 0 (pass1,cd1)
<\263\244\263? USB Flash Disk 1.06>  at scbus2 target 0 lun 0 (da0,pass2)

dmytro# usbdevs
addr 1: UHCI root hub, VIA
 addr 2: product 0x8001, vendor 0x09a6
addr 1: UHCI root hub, VIA

dmytro# dmesg
....
uhci0: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 5 at device 17.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 5 at device 17.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
....

Any advice?

Thanks!