Sony Clie PEG-SJ33 ucom0: init failed, IOERROR

[Julian Elischer]

Hi Nikolay.

can you please check if this still happens under RELENG_4
(or even under 5/6)?
A change was recently committed that may be relevent.


Nikolay Pavlov wrote:
> Hi, freebsd users.
> 
> [I am not subscribed to this list, so please CC me..]
> 
> 	As a new usb maillist has opened, I have 
> decided to address in it with the problem which disturb
> me rather for a long time. I have Sony Clie PEG-SJ33
> device and want to sync it with my FreeBSD 4.10-p3,
> but in time when I press the Sync button, I see this
> message:
> 
> ucom0: Sony Palm Handheld, rev 1.10/1.00, addr 2
> ucom0: Sony Palm Handheld, rev 1.10/1.00, addr 2
> ucom0: init failed, IOERROR
> device_probe_and_attach: ucom0 attach returned 6
> uhub1: port 1, set config at addr 2 failed
> uhub1: device problem, disabling port 1
> uhub1: port error, restarting port 1
> 
> Here is some additional information:
> 
> # usbdev -dv
> Controller /dev/usb0:
> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), VIA(0x0000), rev 1.00
>   uhub0
>  port 1 powered
>  port 2 powered
>   
> USB related dmesg information:
> 
> uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 11 at device 16.0 on pci0
> usb0: <VIA 83C572 USB controller> on uhci0
> usb0: USB revision 1.0
> uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 11 at device 16.1 on pci0
> usb1: <VIA 83C572 USB controller> on uhci1
> usb1: USB revision 1.0
> uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 5 at device 16.2 on pci0
> usb2: <VIA 83C572 USB controller> on uhci2
> usb2: USB revision 1.0
> uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> uhci3: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 5 at device 16.3 on pci0
> usb3: <VIA 83C572 USB controller> on uhci3
> usb3: USB revision 1.0
> uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> 
> USB related kernel configuration information:
> 
> # USB support
> device          uhci            # UHCI PCI->USB interface
> device          ohci            # OHCI PCI->USB interface
> device          usb             # USB Bus (required)
> device          ucom            #
> device          uvisor          # Palm support
> device          ugen            # Generic
> device          uhid            # "Human Interface Devices"
> #device         ukbd            # Keyboard
> #device         ulpt            # Printer
> device          umass           # Disks/Mass storage - Requires scbus and da
> #device         ums             # Mouse
> device          uscanner        # Scanners
> #device         urio            # Diamond Rio MP3 Player
> 
> Best regards and sorry for my english,
> 			Nikolay Pavlov.
> _______________________________________________
> freebsd-usb at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-usb
> To unsubscribe, send any mail to "freebsd-usb-unsubscribe at freebsd.org"