UCR 61S2B / card reader

Wed Dec 8 14:13:01 PST 2004

On Wednesday 01 December 2004 08:07 am, Arne Wörner wrote:
> Does somebody here know, how to solve my bug problem report
>   kern/62257
> (http://www.freebsd.org/cgi/query-pr.cgi?pr=kern/62257)?
>
> Thx.
>
> -Arne
>
I think that I've got a drive that is similar.  I've attached a dmesg and 
usbdevs.
-- 
Anish Mistry
-------------- next part --------------
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.0-CURRENT #0: Wed Dec  8 16:08:23 EST 2004
    root at home.am-productions.biz:/usr/obj/usr/src/sys/HOME
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Sempron(tm)   2400+ (1666.68-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x681  Stepping = 1
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!>
real memory  = 536805376 (511 MB)
avail memory = 511893504 (488 MB)
bktr_mem: memory holder loaded
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <Nvidia AWRDACPI> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf0-0xcf3,0xcf8-0xcff on acpi0
pci_link0: <ACPI PCI Link LSMB> irq 11 on acpi0
pci_link1: <ACPI PCI Link LUBA> irq 5 on acpi0
pci_link2: <ACPI PCI Link LUBB> irq 9 on acpi0
pci_link3: <ACPI PCI Link LUB2> irq 3 on acpi0
pci_link4: <ACPI PCI Link LMAC> on acpi0
pci_link5: <ACPI PCI Link LAPU> on acpi0
pci_link6: <ACPI PCI Link LACI> irq 12 on acpi0
pci_link7: <ACPI PCI Link LMCI> on acpi0
pci_link8: <ACPI PCI Link LIDE> on acpi0
pci_link9: <ACPI PCI Link LSID> on acpi0
pci_link10: <ACPI PCI Link LNK1> on acpi0
pci_link11: <ACPI PCI Link LNK2> on acpi0
pci_link12: <ACPI PCI Link LNK3> irq 11 on acpi0
pci_link13: <ACPI PCI Link LNK4> irq 10 on acpi0
pci_link14: <ACPI PCI Link LNK5> on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xec002000-0xec002fff irq 5 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
umass0: Generic USB Storage Device, rev 1.10/1.00, addr 3
umass0: SCSI over Bulk-Only; quirks = 0x0000
umass0:0:0:-1: Attached to scbus0
ohci1: <OHCI (generic) USB controller> mem 0xec003000-0xec003fff irq 9 at device 2.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
uhub2: Texas Instruments General Purpose USB Hub, class 9/0, rev 1.10/1.01, addr 2
uhub2: 2 ports with 0 removable, bus powered
ukbd0: Logitech USB Receiver, rev 1.10/24.04, addr 3, iclass 3/1
kbd1 at ukbd0
ums0: Logitech USB Receiver, rev 1.10/24.04, addr 3, iclass 3/1
ums0: 7 buttons and Z dir.
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xec004000-0xec0040ff irq 3 at device 2.2 on pci0
ehci0: [GIANT-LOCKED]
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
usb2: EHCI version 1.0
usb2: companion controllers, 4 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub3: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: single transaction translator
uhub3: 8 ports with 8 removable, self powered
pcm0: <nVidia nForce2 400> port 0xd400-0xd47f,0xd000-0xd0ff mem 0xec005000-0xec005fff irq 12 at device 6.0 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <Avance Logic ALC658 AC97 Codec>
pcib1: <ACPI PCI-PCI bridge> at device 8.0 on pci0
pci_link12: BIOS IRQ 12 does not match initial IRQ 11
pci2: <ACPI PCI bus> on pcib1
bktr0: <BrookTree 878> mem 0xe9000000-0xe9000fff irq 12 at device 10.0 on pci2
bktr0: [GIANT-LOCKED]
bktr0: Warning - card vendor 0x1002 (model 0x0003) unknown.
bktr0: Pinnacle/Miro TV, Temic NTSC tuner.
pci2: <multimedia> at device 10.1 (no driver attached)
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xc000-0xc0ff mem 0xe8000000-0xe80000ff irq 12 at device 11.0 on pci2
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:50:8d:63:51:0b
atapci0: <nVidia nForce2 MCP UDMA133 controller> port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 9.0 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib2
nvidia0: <GeForce4 MX 4000> mem 0xd8000000-0xdfffffff,0xea000000-0xeaffffff irq 10 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
pci_link15: <ACPI PCI Link LFIR> on acpi0
pci_link16: <ACPI PCI Link L3CM> on acpi0
pci_link17: <ACPI PCI Link APC1> irq 16 on acpi0
pci_link18: <ACPI PCI Link APC2> irq 17 on acpi0
pci_link19: <ACPI PCI Link APC3> irq 18 on acpi0
pci_link20: <ACPI PCI Link APC4> irq 19 on acpi0
pci_link21: <ACPI PCI Link APC5> irq 16 on acpi0
pci_link22: <ACPI PCI Link APCF> irq 0 on acpi0
pci_link23: <ACPI PCI Link APCG> irq 0 on acpi0
pci_link24: <ACPI PCI Link APCH> irq 0 on acpi0
pci_link25: <ACPI PCI Link APCI> irq 0 on acpi0
pci_link26: <ACPI PCI Link APCJ> irq 0 on acpi0
pci_link27: <ACPI PCI Link APCK> irq 0 on acpi0
pci_link28: <ACPI PCI Link APCS> irq 23 on acpi0
pci_link29: <ACPI PCI Link APCL> irq 0 on acpi0
pci_link30: <ACPI PCI Link APCM> irq 0 on acpi0
pci_link31: <ACPI PCI Link AP3C> irq 0 on acpi0
pci_link32: <ACPI PCI Link APCZ> irq 0 on acpi0
pci_link33: <ACPI PCI Link APSI> irq 0 on acpi0
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcf7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1666675219 Hz quality 800
Timecounters tick every 1.000 msec
Interrupt storm detected on "irq12: pcm0 vr0+"; throttling interrupt source
Interrupt storm detected on "irq5: ohci0"; throttling interrupt source
Interrupt storm detected on "irq3: ehci0"; throttling interrupt source
Interrupt storm detected on "irq10: nvidia0"; throttling interrupt source
ad0: 17206MB <IBM-DJNA-371800/J78OA30K> [34960/16/63] at ata0-master UDMA66
ad1: 152627MB <WDC WD1600JB-00FUA0/15.05R15> [310101/16/63] at ata0-slave UDMA100
acd0: CDRW <WSM-52Z/VER 1.10> at ata1-master UDMA33
(null): at uhub0 port 3 (addr 2) disconnected
uhub2: at uhub1 port 3 (addr 2) disconnected
ukbd0: at uhub2 port 1 (addr 3) disconnected
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
kern_symlink  = 0
Trying to mount root from ufs:/dev/ad0s2a
kernel_vmount = 0
umass0: at uhub0 port 4 (addr 3) disconnected
umass0: detached
umass0: Generic USB Storage Device, rev 1.10/1.00, addr 3
umass0: SCSI over Bulk-Only; quirks = 0x0000
umass0:0:0:-1: Attached to scbus0
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <IC USB Storage-CFC 301b> Removable Direct Access SCSI-0 device 
da0: 1.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
da1 at umass-sim0 bus 0 target 0 lun 1
da1: <IC USB Storage-SMC 301b> Removable Direct Access SCSI-0 device 
da1: 1.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
(da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0 
(da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:1): SCSI Status: Check Condition
(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
(da1:umass-sim0:0:0:1): Unretryable error
Opened disk da1 -> 6
(da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0 
(da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:1): SCSI Status: Check Condition
(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
(da1:umass-sim0:0:0:1): Unretryable error
Opened disk da1 -> 6
(da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0 
(da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:1): SCSI Status: Check Condition
(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
(da1:umass-sim0:0:0:1): Unretryable error
Opened disk da1 -> 6
da2 at umass-sim0 bus 0 target 0 lun 2
da2: <IC USB Storage-MMC 301b> Removable Direct Access SCSI-0 device 
da2: 1.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
(da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0 
(da2:umass-sim0:0:0:2): CAM Status: SCSI Status Error
(da2:umass-sim0:0:0:2): SCSI Status: Check Condition
(da2:umass-sim0:0:0:2): NOT READY asc:3a,0
(da2:umass-sim0:0:0:2): Medium not present
(da2:umass-sim0:0:0:2): Unretryable error
Opened disk da2 -> 6
(da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0 
(da2:umass-sim0:0:0:2): CAM Status: SCSI Status Error
(da2:umass-sim0:0:0:2): SCSI Status: Check Condition
(da2:umass-sim0:0:0:2): NOT READY asc:3a,0
(da2:umass-sim0:0:0:2): Medium not present
(da2:umass-sim0:0:0:2): Unretryable error
Opened disk da2 -> 6
(da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0 
(da2:umass-sim0:0:0:2): CAM Status: SCSI Status Error
(da2:umass-sim0:0:0:2): SCSI Status: Check Condition
(da2:umass-sim0:0:0:2): NOT READY asc:3a,0
(da2:umass-sim0:0:0:2): Medium not present
(da2:umass-sim0:0:0:2): Unretryable error
Opened disk da2 -> 6
da3 at umass-sim0 bus 0 target 0 lun 3
da3: <IC USB Storage-MSC 301b> Removable Direct Access SCSI-0 device 
da3: 1.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
(da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0 
(da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error
(da3:umass-sim0:0:0:3): SCSI Status: Check Condition
(da3:umass-sim0:0:0:3): NOT READY asc:3a,0
(da3:umass-sim0:0:0:3): Medium not present
(da3:umass-sim0:0:0:3): Unretryable error
Opened disk da3 -> 6
(da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0 
(da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error
(da3:umass-sim0:0:0:3): SCSI Status: Check Condition
(da3:umass-sim0:0:0:3): NOT READY asc:3a,0
(da3:umass-sim0:0:0:3): Medium not present
(da3:umass-sim0:0:0:3): Unretryable error
Opened disk da3 -> 6
(da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0 
(da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error
(da3:umass-sim0:0:0:3): SCSI Status: Check Condition
(da3:umass-sim0:0:0:3): NOT READY asc:3a,0
(da3:umass-sim0:0:0:3): Medium not present
(da3:umass-sim0:0:0:3): Unretryable error
Opened disk da3 -> 6
ukbd0: detached
ums0: at uhub2 port 1 (addr 3) disconnected
ums0: detached
uhub2: detached
usb_new_device: set address 2 failed - trying a port reset
usb_new_device: set address 2 failed - trying a port reset
usb_new_device: set address 2 failed - trying a port reset
usb_new_device: set address 2 failed
uhub_explore: usb_new_device failed, error=SET_ADDR_FAILED
uhub1: device problem (SET_ADDR_FAILED), disabling port 3
-------------- next part --------------
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), nVidia(0x0000), rev 1.00
 port 1 powered
 port 2 powered
 port 3 addr 2: full speed, self powered, config 1, deskjet 5550(0x6004), hp(0x03f0), rev 1.00
 port 4 addr 3: full speed, power 100 mA, config 1, USB Storage Device(0x0c55), Generic(0x1019), rev 1.00
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), nVidia(0x0000), rev 1.00
 port 1 powered
 port 2 powered
 port 3 enabled
 port 4 powered
Controller /dev/usb2:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), nVidia(0x0000), rev 1.00
 port 1 powered
 port 2 powered
 port 3 powered
 port 4 powered
 port 5 powered
 port 6 powered
 port 7 powered
 port 8 powered
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 187 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-usb/attachments/20041208/d157872b/attachment.bin