u-boot-a64-olinuxino difference between U-Boot SPL 2019.10 & U-Boot SPL 2019.07

[Gary Otten]

The 2019.10 u-boot I compiled with with the a64-olinuxino_defconfig
configuration doesn't find the UFS partition the old one 2019.07 that is in
the ports pre-compiled does.  Is there a configuration setting that I must
set before compiling?  Or did I overlook something else? Is my SD card
layout appropriate, or causing the problem?

***********************************************************************************
U-Boot SPL 2019.07  (from the pre-made package)    (this works)
(partial bootup txt)

  Initializing modules: ZFS UFS
   Load Path: /efi\boot\bootaa64.efi
   Load Device:
/VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(1,0x01,0,0x800,0x64000)
   Probing 3 block devices.....* done
    ZFS found no pools
    UFS found 1 partition
Consoles: EFI console
FreeBSD/arm64 EFI loader, Revision 1.1

   Command line arguments: loader.efi
   EFI version: 2.70
   EFI Firmware: Das U-Boot (rev 8217.1792)
   Console: efi (0)
 Load Device:
/VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(2,0x01,0,0x96800,0x1c8b800)
Trying ESP:
/VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(2,0x01,0,0x96800,0x1c8b800)
Setting currdev to disk0p2:
Loading /boot/defaults/loader.conf
Loading /boot/device.hints
Loading /boot/loader.conf
Loading /boot/loader.conf.local
-
Loading kernel...

*******************************************************************************


  U-Boot SPL 2019.10 (Compiled by myself)
  (partial bootup txt)

 Initializing modules: ZFS UFS
   Load Path: /efi\boot\bootaa64.efi
   Load Device:
/VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(1,0x01,0,0x800,0x64000)
   Probing 3 block devices...... done
    ZFS found no pools
    UFS found no partitions
Failed to load '/boot/loader.efi'
panic: No bootable partitions found!
## Application terminated, r = 1
EFI LOAD FAILED: continuing...
Card did not respond to voltage select!
Device 0: unknown device
ethernet at 1c30000 Waiting for PHY auto negotiation to complete.........
TIMEOUT !
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
****************************************************************************************************
My SD card layout.

da2   MBR (15G)
           free  (993k)
    1  efi (200M)
           free (100M)
    2 freebsd  (active)  (14G)


da2s2    BSD (14G)
     1  freebsd-ufs   (14G)