From peter.jeremy at alcatel-lucent.com.au Fri May 16 03:05:02 2008 From: peter.jeremy at alcatel-lucent.com.au (Peter Jeremy) Date: Fri May 16 03:05:06 2008 Subject: Running FreeBSD as a sun4v guest Message-ID: <20080516024631.GA13677@pjdesk.au.alcatel-lucent.com> I've tried booting the sun4v snapshot in a sun4v guest and it looks like FreeBSD doesn't support either the virtual disk or virtual network. I would be interested in getting this going but the entire sun4v port seems to have stalled. I've noticed that the netboot is not very reliable but I'm need to study network traces to work out whether the fault is with the FreeBSD loader(8) or the Sun I'm using as a boot server. FWIW, the boot looks like: {0} ok boot net Sun Fire T200, No Keyboard Copyright 2008 Sun Microsystems, Inc. All rights reserved. OpenBoot 4.28.1, 896 MB memory available, Serial #66631397. Ethernet address 0:14:4f:f8:b6:e5, Host ID: 83f8b6e5. Boot device: /virtual-devices@100/channel-devices@200/network@0 File and args: Requesting Internet Address for 0:14:4f:f9:f2:93 Consoles: Open Firmware console Booting with sun4v support. FreeBSD/sparc64 bootstrap loader, Revision 1.0 (root@freebsd9.cimlogic.com.au, Fri Nov 10 04:56:06 UTC 2006) bootpath="/virtual-devices@100/channel-devices@200/network@0" boot: ethernet address: 00:14:4f:f9:f2:93 net_open: server addr: 139.188.91.249 net_open: server path: /in/OS_discs/CD_FreeBSD7 Loading /boot/defaults/loader.conf Warning: unable to open file /boot/loader.conf.local /boot/kernel/kernel data=0x3eac08+0x68be8 syms=[0x8+0x582f0+0x8+0x4a707] mfsroot...ok Hit [Enter] to boot immediately, or any other key for command prompt. Type '?' for a list of commands, 'help' for more detailed help. OK show boot.netif.gateway=0.0.0.0 boot.netif.hwaddr=00:14:4f:f9:f2:93 boot.netif.ip=139.188.91.178 boot.netif.netmask=255.255.255.0 boot.nfsroot.nfshandle=X0154001e00000002000a0000000ef5f5621c993f000a00000000427c12a2b37cX boot.nfsroot.path=/in/OS_discs/CD_FreeBSD7 boot.nfsroot.server=139.188.91.249 boot_verbose= bootfile=kernel console=ofw currdev=/virtual-devices@100/channel-devices@200/network@0 interpret=OK kernel=kernel kernel_options= kernelname=/boot/kernel/kernel loaddev=/virtual-devices@100/channel-devices@200/network@0 mac_ifoff=NO module_path=/boot/kernel;/boot/modules prompt=${interpret} OK boot -v nothing to autoload yet. jumping to kernel entry at 0xc0050000. tick_freq=1200000000 hz=100 tick_increment=12000000 cpu0: UltraSparc T1 Processor (1200.00 MHz CPU) KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-CURRENT #11: Sun Nov 12 12:40:48 EST 2006 root@freebsd9.cimlogic.com.au:/usr/obj/usr/src/sys/GENERIC /usr/src/sys/vm/vm_init.c(117): /usr/src/sys/vm/vm_init.c(119): Using 32 colors for the VM-PQ tuning (3072, 12) /usr/src/sys/vm/vm_page.c(257): /usr/src/sys/vm/vm_page.c(264): /usr/src/sys/vm/vm_page.c(267): /usr/src/sys/vm/vm_page.c(269): /usr/src/sys/vm/vm_page.c(271): /usr/src/sys/vm/vm_page.c(297): nblocks 2 /usr/src/sys/vm/vm_page.c(303): npages 108367 /usr/src/sys/vm/vm_page.c(332): clear all page structures /usr/src/sys/vm/vm_page.c(360): construct the free queues: /usr/src/sys/vm/vm_page.c(364): 0x902c000 - 0x3d2ca000 /usr/src/sys/vm/vm_page.c(364): 0x3f000000 - 0x3fc00000 /usr/src/sys/vm/vm_page.c(375): /usr/src/sys/vm/vm_page.c(377): /usr/src/sys/vm/vm_init.c(121): /usr/src/sys/vm/vm_init.c(126): /usr/src/sys/vm/vm_init.c(128): /usr/src/sys/vm/vm_init.c(130): /usr/src/sys/vm/vm_init.c(132): /usr/src/sys/vm/vm_init.c(134): /usr/src/sys/vm/vm_init.c(136): Preloaded elf kernel "/boot/kernel/kernel" at 0xc08fa000. Preloaded mfs_root "/boot/mfsroot" at 0xc08fa140. Timecounter "tick" frequency 1200000000 Hz quality 1000 real memory = 939524096 (896 MB) avail memory = 882475008 (841 MB) machine: SUNW,Sun-Fire-T200 4 cpus: UltraSparc T1 Processor (1200.00 MHz CPU) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs random: mem: nfslock: pseudo-device null: openfirm: nexus0: vnex0: irq 17,33,34,35,36,37,38,39 on nexus0 vnex0: type unknown (no driver attached) vnex0: type unknown (no driver attached) hvcn0: on vnex0 hvcn0: couldn't set up irq device_attach: hvcn0 attach returned 2 vnex0: type network (no driver attached) vnex0: type network (no driver attached) vnex0: type network (no driver attached) vnex0: type network (no driver attached) vnex0: type block (no driver attached) procfs registered initalizing intr_countp Timecounters tick every 10.000 msec lo0: bpf attached nfs_diskless: no interface mp_ncpus=4 curcpu 3 trap_trace_entry 0xc0374a00 TRAP_TRACE_ENTRIES 256 AP: #3 curcpu 2 trap_trace_entry 0xc0370a00 TRAP_TRACE_ENTRIES 256 AP: #2 curcpu 1 trap_trace_entry 0xc036ca00 TRAP_TRACE_ENTRIES 256 AP: #1 md0: Preloaded image 4194304 bytes at 0xc04f61f8 Trying to mount root from ufs:/dev/md0 warning: no time-of-day clock registered, system time will not be set accurately start_init: trying /sbin/init start_init: trying /sbin/oinit start_init: trying /sbin/init.bak start_init: trying /rescue/init start_init: trying /stand/sysinstall /stand/sysinstall running as init on serial console These are the predefined terminal types available to sysinstall when running stand-alone. Please choose the closest match for your particular terminal. 1 ...................... Standard ANSI terminal. 2 ...................... VT100 or compatible terminal. 3 ...................... FreeBSD system console (color). 4 ...................... FreeBSD system console (monochrome). 5 ...................... xterm terminal emulator. Your choice: (1-5) -- Peter Jeremy -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 195 bytes Desc: not available Url : http://lists.freebsd.org/pipermail/freebsd-sun4v/attachments/20080516/fb28b9c2/attachment.pgp From hecyro_71 at yahoo.it Sat May 24 12:54:07 2008 From: hecyro_71 at yahoo.it (Simon from Italy) Date: Sat May 24 12:54:27 2008 Subject: Do you want to jump on my motorbyke? Message-ID: <05092ac3ec85802333a581ab1acb695c@yahoo.it> Hello, i?m italian boy. I have 36 years and I love to travel in motorbyke in Europe, beach or mountain and camping, in my vacations. The past summers I have been on the beaches of Spain, France, Croatia, Holland, but also Hungary, Switzerland, Austria, Belgium, Germany, Slovenia, Poland, Republik Czech, Repubblik Slovanska, Lithuania, Latvia... I search a girl that she loves to travel in motorbyke and that she wants to make from travel?s partner in order to organize the next vacations. Usually I make of the trance of vacations from 10 - 15 days and succeed not to spend very. My period for vacations is: 25/5 - 2/6 or 6/6 - 16/6 or 21/6 - 30/6 or 1/8 - 24/8 I?m single and I search girl in order to amuse themselves and to discover new worlds, new cultures, new people... Do you want to jump on my motorbyke? Simon hecyro_71@yahoo.it ___________________________________________________________________________________________________________________________ Ciao, sono un ragazzo italiano. Ho 36 anni e amo trascorrere le vacanze girando in moto per l'Europa, spiagge o montagna e campeggi. Le scorse estati sono stato sulle spiagge di Spagna, Francia, Croazia, Olanda, Lituania, ma anche in Ungheria, Svizzera, Austria, Belgio, Germania, Slovenia, Repubblica Ceca, Repubblica Slovacca, Polonia, Lussemburgo, Lituania, Lettonia... Cerco una ragazza, a cui piaccia la moto e che voglia fare da compagna di viaggio per organizzare le prossime vacanze. Io ho le ferie in questi periodi: 25/5 - 2/6 o 6/6 - 16/6 o 21/6 - 30/6 o 1/8 - 24/8 Solitamente riesco a non spendere molto. Sono single e sto solo cercando una COMPAGNA DI VIAGGIO per divertirsi e scoprire nuovi mondi, nuove culture, gente nuova... Salti in sella? Simone hecyro_71@yahoo.it Message envoy? par la version d'essai d'Oxilog e-mailing. Attention : La soci?t? Oxilog n'est pas ? l'origine de l'envoi de ce message et n'est pas responsable de son contenu. Pour toute demande ou r?clamation, veuillez contacter l'exp?diteur de ce message.