make_dev_physpath_alias

Ronald Klop ronald-freebsd8 at klop.yi.org
Tue Mar 5 15:34:27 UTC 2013 

On Tue, 05 Mar 2013 15:10:52 +0100, Johan Hendriks  
<joh.hendriks at gmail.com> wrote:

> Hello all.
>
> I have a supermicro 16 bay box with a LSI 9211-8i card.
> We use it for temp data storage, and we wanted to try the l4z  
> compression.
>
> After updating the source tree to r247839: and doing a make buildworld  
> cycle all works fine.
> But at boot time we get some warnings.
> make_dev_physpath_alias: WARNING - Unable to alias  
> gptid/281951f4-a996-11e1-83eb-00259061b51a to  
> enc at n500304800182f4fd/type at 0/slot at 1/elmdesc at Slot_01/gptid/281951f4-a996-11e1-83eb-00259061b51a  
> - path too long
>
> Do i need to worry!!!

Only if you want to use the paths it can't create.

Ronald.

>
> Gr
> johan
>
> Here is my full dmesg
>
> Copyright (c) 1992-2013 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>          The Regents of the University of California. All rights  
> reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 9.1-STABLE #0 r247839: Tue Mar  5 13:17:25 CET 2013
>      root at backup.neuteboom.com:/usr/obj/usr/src/sys/KRNL amd64
> CPU: Intel(R) Xeon(R) CPU E31220 @ 3.10GHz (3093.04-MHz K8-class CPU)
>    Origin = "GenuineIntel"  Id = 0x206a7  Family = 0x6  Model = 0x2a  
> Stepping = 7
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> Features2=0x1fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX>
>    AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
>    AMD Features2=0x1<LAHF>
>    TSC: P-state invariant, performance statistics
> real memory  = 34359738368 (32768 MB)
> avail memory = 33075630080 (31543 MB)
> Event timer "LAPIC" quality 600
> ACPI APIC Table: <SUPERM SMCI--MB>
> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
> FreeBSD/SMP: 1 package(s) x 4 core(s)
>   cpu0 (BSP): APIC ID:  0
>   cpu1 (AP): APIC ID:  2
>   cpu2 (AP): APIC ID:  4
>   cpu3 (AP): APIC ID:  6
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> kbd1 at kbdmux0
> ctl: CAM Target Layer loaded
> acpi0: <SUPERM SMCI--MB> on motherboard
> acpi0: Power Button (fixed)
> acpi0: reservation of 67, 1 (4) failed
> cpu0: <ACPI CPU> on acpi0
> cpu1: <ACPI CPU> on acpi0
> cpu2: <ACPI CPU> on acpi0
> cpu3: <ACPI CPU> on acpi0
> hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
> Timecounter "HPET" frequency 14318180 Hz quality 950
> Event timer "HPET" frequency 14318180 Hz quality 550
> Event timer "HPET1" frequency 14318180 Hz quality 440
> Event timer "HPET2" frequency 14318180 Hz quality 440
> Event timer "HPET3" frequency 14318180 Hz quality 440
> Event timer "HPET4" frequency 14318180 Hz quality 440
> atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
> atrtc0: Warning: Couldn't map I/O.
> Event timer "RTC" frequency 32768 Hz quality 0
> attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Event timer "i8254" frequency 1193182 Hz quality 100
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> irq 19 at device 6.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> mps0: <LSI SAS2008> port 0xe000-0xe0ff mem  
> 0xf7600000-0xf7603fff,0xf7580000-0xf75bffff irq 19 at device 0.0 on pci1
> mps0: Firmware: 15.00.00.00, Driver: 14.00.00.01-fbsd
> mps0: IOCCapabilities:  
> 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
> em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xf020-0xf03f mem  
> 0xf7800000-0xf781ffff,0xf7825000-0xf7825fff irq 20 at device 25.0 on pci0
> em0: Using an MSI interrupt
> em0: Ethernet address: 00:25:90:75:c8:09
> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf7824000-0xf78243ff irq  
> 16 at device 26.0 on pci0
> usbus0: EHCI version 1.0
> usbus0 on ehci0
> pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
> pci3: <ACPI PCI bus> on pcib3
> em1: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xd000-0xd01f mem  
> 0xf7700000-0xf771ffff,0xf7720000-0xf7723fff irq 16 at device 0.0 on pci3
> em1: Using MSIX interrupts with 3 vectors
> em1: Ethernet address: 00:25:90:75:c8:08
> ehci1: <EHCI (generic) USB 2.0 controller> mem 0xf7823000-0xf78233ff irq  
> 23 at device 29.0 on pci0
> usbus1: EHCI version 1.0
> usbus1 on ehci1
> pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci4: <ACPI PCI bus> on pcib4
> vgapci0: <VGA-compatible display> mem  
> 0xf5000000-0xf5ffffff,0xf7000000-0xf7003fff,0xf6800000-0xf6ffffff irq 19  
> at device 3.0 on pci4
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> ahci0: <Intel Cougar Point AHCI SATA controller> port  
> 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf000-0xf01f  
> mem 0xf7822000-0xf78227ff irq 19 at device 31.2 on pci0
> ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
> ahcich0: <AHCI channel> at channel 0 on ahci0
> ahcich1: <AHCI channel> at channel 1 on ahci0
> ahcich2: <AHCI channel> at channel 2 on ahci0
> ahcich4: <AHCI channel> at channel 4 on ahci0
> ahcich5: <AHCI channel> at channel 5 on ahci0
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> acpi_button0: <Power Button> on acpi0
> acpi_tz0: <Thermal Zone> on acpi0
> acpi_tz1: <Thermal Zone> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: model IntelliMouse Explorer, device ID 4
> uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
> uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
> uart2: <16550 or compatible> port 0x3e8-0x3ef irq 10 on acpi0
> orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xce000-0xcefff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> ppc0: cannot reserve I/O port range
> est0: <Enhanced SpeedStep Frequency Control> on cpu0
> p4tcc0: <CPU Frequency Thermal Control> on cpu0
> est1: <Enhanced SpeedStep Frequency Control> on cpu1
> p4tcc1: <CPU Frequency Thermal Control> on cpu1
> est2: <Enhanced SpeedStep Frequency Control> on cpu2
> p4tcc2: <CPU Frequency Thermal Control> on cpu2
> est3: <Enhanced SpeedStep Frequency Control> on cpu3
> p4tcc3: <CPU Frequency Thermal Control> on cpu3
> ZFS filesystem version: 5
> ZFS storage pool version: features support (5000)
> Timecounters tick every 1.000 msec
> usbus0: 480Mbps High Speed USB v2.0
> usbus1: 480Mbps High Speed USB v2.0
> ugen0.1: <Intel> at usbus0
> uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
> ugen1.1: <Intel> at usbus1
> uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
> ada0 at ahcich0 bus 0 scbus1 target 0 lun 0
> ada0: <INTEL SSDSA2CT040G3 4PC10362> ATA-8 SATA 2.x device
> ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
> ada0: Command Queueing enabled
> ada0: 38166MB (78165360 512 byte sectors: 16H 63S/T 16383C)
> ada0: Previously was known as ad4
> ada1 at ahcich1 bus 0 scbus2 target 0 lun 0
> ada1: <INTEL SSDSA2CT040G3 4PC10362> ATA-8 SATA 2.x device
> ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
> ada1: Command Queueing enabled
> ada1: 38166MB (78165360 512 byte sectors: 16H 63S/T 16383C)
> ada1: Previously was known as ad6
> ses0 at mps0 bus 0 scbus0 target 8 lun 0
> ses0: <LSI CORP SAS2X28 0717> Fixed Enclosure Services SCSI-5 device
> ses0: 600.000MB/s transfers
> ses0: Command Queueing enabled
> ses0: SCSI-3 ENC Device
> ses0: probe9,pass1,da0: Element descriptor: 'Slot 01'
> ses0: probe9,pass1,da0: SAS Device Slot Element: 1 Phys at Slot 0
> ses0:  phy 0: SATA device
> ses0:  phy 0: parent 500304800182f4ff addr 500304800182f4ec
> ses0: probe10,pass2,da1: Element descriptor: 'Slot 02'
> ses0: probe10,pass2,da1: SAS Device Slot Element: 1 Phys at Slot 1
> ses0:  phy 0: SATA device
> ses0:  phy 0: parent 500304800182f4ff addr 500304800182f4ed
> ses0: probe11,pass3,da2: Element descriptor: 'Slot 03'
> ses0: probe11,pass3,da2: SAS Device Slot Element: 1 Phys at Slot 2
> ses0:  phy 0: SATA device
> ses0:  phy 0: parent 500304800182f4ff addr 500304800182f4ee
> ses0: probe12,pass4,da3: Element descriptor: 'Slot 04'
> ses0: probe12,pass4,da3: SAS Device Slot Element: 1 Phys at Slot 3
> ses0:  phy 0: SATA device
> ses0:  phy 0: parent 500304800182f4ff addr 500304800182f4ef
> ses0: probe13,pass5,da4: Element descriptor: 'Slot 05'
> ses0: probe13,pass5,da4: SAS Device Slot Element: 1 Phys at Slot 4
> ses0:  phy 0: SATA device
> ses0:  phy 0: parent 500304800182f4ff addr 500304800182f4f0
> ses0: probe14,pass6,da5: Element descriptor: 'Slot 06'
> ses0: probe14,pass6,da5: SAS Device Slot Element: 1 Phys at Slot 5
> ses0:  phy 0: SATA device
> ses0:  phy 0: parent 500304800182f4ff addr 500304800182f4f1
> SMP: AP CPU #3 Launched!
> SMP: AP CPU #1 Launched!
> SMP: AP CPU #2 Launched!
> Timecounter "TSC-low" frequency 1546522006 Hz quality 1000
> da4 at mps0 bus 0 scbus0 target 13 lun 0
> da4: <ATA WDC WD20EARX-00P AB51> Fixed Direct Access SCSI-6 device
> da4: 600.000MB/s transfers
> da4: Command Queueing enabled
> da4: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
> da3 at mps0 bus 0 scbus0 target 12 lun 0
> da3: <ATA WDC WD20EARX-00P AB51> Fixed Direct Access SCSI-6 device
> da3: 600.000MB/s transfers
> da3: Command Queueing enabled
> da3: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
> da0 at mps0 bus 0 scbus0 target 9 lun 0
> da0: <ATA WDC WD20EARX-00P AB51> Fixed Direct Access SCSI-6 device
> da0: 600.000MB/s transfers
> da0: Command Queueing enabled
> da0: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
> da5 at mps0 bus 0 scbus0 target 14 lun 0
> da5: <ATA WDC WD20EARX-00P AB51> Fixed Direct Access SCSI-6 device
> da5: 600.000MB/s transfers
> da5: Command Queueing enabled
> da5: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
> da2 at mps0 bus 0 scbus0 target 11 lun 0
> da2: <ATA WDC WD20EARX-00P AB51> Fixed Direct Access SCSI-6 device
> da2: 600.000MB/s transfers
> da2: Command Queueing enabled
> da2: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
> da1 at mps0 bus 0 scbus0 target 10 lun 0
> da1: <ATA WDC WD20EARX-00P AB51> Fixed Direct Access SCSI-6 device
> da1: 600.000MB/s transfers
> da1: Command Queueing enabled
> da1: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
> uhub0: 2 ports with 2 removable, self powered
> uhub1: 2 ports with 2 removable, self powered
> make_dev_physpath_alias: WARNING - Unable to alias  
> gptid/281951f4-a996-11e1-83eb-00259061b51a to  
> enc at n500304800182f4fd/type at 0/slot at 1/elmdesc at Slot_01/gptid/281951f4-a996-11e1-83eb-00259061b51a  
> - path too long
> make_dev_physpath_alias: WARNING - Unable to alias  
> gptid/87f6d404-a997-11e1-83eb-00259061b51a to  
> enc at n500304800182f4fd/type at 0/slot at 2/elmdesc at Slot_02/gptid/87f6d404-a997-11e1-83eb-00259061b51a  
> - path too long
> make_dev_physpath_alias: WARNING - Unable to alias  
> gptid/affdfc28-a997-11e1-83eb-00259061b51a to  
> enc at n500304800182f4fd/type at 0/slot at 3/elmdesc at Slot_03/gptid/affdfc28-a997-11e1-83eb-00259061b51a  
> - path too long
> make_dev_physpath_alias: WARNING - Unable to alias  
> gptid/c8eab51d-a997-11e1-83eb-00259061b51a to  
> enc at n500304800182f4fd/type at 0/slot at 4/elmdesc at Slot_04/gptid/c8eab51d-a997-11e1-83eb-00259061b51a  
> - path too long
> ugen0.2: <vendor 0x8087> at usbus0
> uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2>  
> on usbus0
> ugen1.2: <vendor 0x8087> at usbus1
> uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2>  
> on usbus1
> make_dev_physpath_alias: WARNING - Unable to alias  
> gptid/e4b1f963-a997-11e1-83eb-00259061b51a to  
> enc at n500304800182f4fd/type at 0/slot at 5/elmdesc at Slot_05/gptid/e4b1f963-a997-11e1-83eb-00259061b51a  
> - path too long
> make_dev_physpath_alias: WARNING - Unable to alias  
> gptid/faa2b1ca-a997-11e1-83eb-00259061b51a to  
> enc at n500304800182f4fd/type at 0/slot at 6/elmdesc at Slot_06/gptid/faa2b1ca-a997-11e1-83eb-00259061b51a  
> - path too long
> Root mount waiting for: usbus1 usbus0
> uhub2: 6 ports with 6 removable, self powered
> uhub3: 6 ports with 6 removable, self powered
> ugen0.3: <Winbond Electronics Corp> at usbus0
> ums0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0,  
> rev 1.10/0.01, addr 3> on usbus0
> ums0: 3 buttons and [Z] coordinates ID=0
> ukbd0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0,  
> rev 1.10/0.01, addr 3> on usbus0
> kbd2 at ukbd0
> Trying to mount root from ufs:/dev/ada0p2 [rw]...
> em0: link state changed to UP
>
>
> thanks all
>
>
>
> _______________________________________________
> freebsd-stable at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"

More information about the freebsd-stable mailing list