USB ports on Lenovo T400 do not work after a suspend/resume

[Adrian Chadd]

Hi,

FreeBSD-9 works fine on this Lenovo T400 - except that suspending with
no USB devices plugged in result in no ports working after resume.

If I have a device plugged in during suspend - on any port - then all
the ports work fine after resume.

I've attached usbconfig and acpidump output.

here's what is logged in the kernel buffer during suspend and resume:


Her'es the suspend:

Jun 20 14:03:34 lucy acpi: suspend at 20130620 14:03:34
Jun 20 14:03:38 lucy kernel: [100031] uhub0: at usbus0, port 1, addr 1
(disconnected)
Jun 20 14:03:38 lucy kernel: [100036] uhub1: at usbus1, port 1, addr 1
(disconnected)
Jun 20 14:03:38 lucy kernel: ugen1.2: <vendor 0x08ff> at usbus1 (disconnected)
Jun 20 14:03:38 lucy kernel: ugen1.3: <Lenovo Computer Corp> at usbus1
(disconnected)
Jun 20 14:03:38 lucy kernel: [100036] ubt0: at uhub1, port 2, addr 3
(disconnected)
Jun 20 14:03:47 lucy kernel: [100041] uhub2: at usbus2, port 1, addr 1
(disconnected)
Jun 20 14:03:47 lucy kernel: [100046] uhub3: at usbus3, port 1, addr 1
(disconnected)
Jun 20 14:03:47 lucy kernel: ugen3.2: <Kingston> at usbus3 (disconnected)
Jun 20 14:03:47 lucy kernel: [100046] umass0: at uhub3, port 1, addr 2
(disconnected)
Jun 20 14:03:47 lucy kernel: (da0:umass-sim0:0:0:0): lost device - 0
outstanding, 1 refs
Jun 20 14:03:47 lucy kernel: (da0:umass-sim0:0:0:0): removing device entry
Jun 20 14:03:47 lucy kernel: ugen3.3: <Chicony Electronics Co., Ltd.>
at usbus3 (disconnected)
Jun 20 14:03:47 lucy kernel: uhci_interrupt: resume detect
Jun 20 14:03:47 lucy kernel: [100052] uhub4: at usbus4, port 1, addr 1
(disconnected)
Jun 20 14:03:47 lucy kernel: [100057] uhub5: at usbus5, port 1, addr 1
(disconnected)
Jun 20 14:03:47 lucy kernel: [100062] uhub6: at usbus6, port 1, addr 1
(disconnected)
Jun 20 14:03:47 lucy kernel: [100067] uhub7: at usbus7, port 1, addr 1
(disconnected)

..and resume: I wonder what these devices are?

Jun 20 14:03:47 lucy kernel: [100095] pci21: failed to set ACPI power
state D2 on \_SB_.PCI0.PCI1.CDBS: AE_BAD_PARAMETER
Jun 20 14:03:47 lucy kernel: [100095] pci0: failed to set ACPI power
state D2 on \_SB_.PCI0.EXP0: AE_BAD_PARAMETER
Jun 20 14:03:47 lucy kernel: [100095] pci0: failed to set ACPI power
state D2 on \_SB_.PCI0.EXP1: AE_BAD_PARAMETER
Jun 20 14:03:47 lucy kernel: [100095] pci0: failed to set ACPI power
state D2 on \_SB_.PCI0.EXP3: AE_BAD_PARAMETER
Jun 20 14:03:47 lucy kernel: [100095] pci0: failed to set ACPI power
state D2 on \_SB_.PCI0.EXP4: AE_BAD_PARAMETER
Jun 20 14:03:47 lucy kernel: [100095] acpi0: cleared fixed power button status
Jun 20 14:03:47 lucy kernel: uhci_interrupt: resume detect
Jun 20 14:03:47 lucy kernel: wakeup from sleeping state (slept 00:00:06)

Jun 20 14:03:47 lucy kernel: [100067] uhub0: <Intel EHCI root HUB,
class 9/0, rev 2.00/1.00, addr 1> on usbus7
Jun 20 14:03:47 lucy kernel: [100046] uhub1: <Intel EHCI root HUB,
class 9/0, rev 2.00/1.00, addr 1> on usbus3
Jun 20 14:03:47 lucy kernel: [100031] uhub2: <Intel UHCI root HUB,
class 9/0, rev 1.00/1.00, addr 1> on usbus0
Jun 20 14:03:47 lucy kernel: [100036] uhub3: <Intel UHCI root HUB,
class 9/0, rev 1.00/1.00, addr 1> on usbus1
Jun 20 14:03:47 lucy kernel: [100057] uhub4: <Intel UHCI root HUB,
class 9/0, rev 1.00/1.00, addr 1> on usbus5
Jun 20 14:03:47 lucy kernel: [100052] uhub5: <Intel UHCI root HUB,
class 9/0, rev 1.00/1.00, addr 1> on usbus4
Jun 20 14:03:47 lucy kernel: [100062] uhub6: <Intel UHCI root HUB,
class 9/0, rev 1.00/1.00, addr 1> on usbus6
Jun 20 14:03:47 lucy kernel: [100041] uhub7: <Intel UHCI root HUB,
class 9/0, rev 1.00/1.00, addr 1> on usbus2

.. local APIC error?

Jun 20 14:03:47 lucy kernel: CPU0: local APIC error 0x40
Jun 20 14:03:47 lucy acpi: resumed at 20130620 14:03:47

It probes the hubs fine though.

Thanks!



Adrian
-------------- next part --------------
ugen0.1: <UHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE (0mA)
ugen1.1: <UHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE (0mA)
ugen2.1: <UHCI root HUB Intel> at usbus2, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE (0mA)
ugen3.1: <EHCI root HUB Intel> at usbus3, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA)
ugen4.1: <UHCI root HUB Intel> at usbus4, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE (0mA)
ugen5.1: <UHCI root HUB Intel> at usbus5, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE (0mA)
ugen6.1: <UHCI root HUB Intel> at usbus6, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE (0mA)
ugen7.1: <EHCI root HUB Intel> at usbus7, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA)
ugen3.2: <DT 101 G2 Kingston> at usbus3, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (200mA)
ugen1.2: <Fingerprint Sensor vendor 0x08ff> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (100mA)
ugen3.3: <Integrated Camera Chicony Electronics Co., Ltd.> at usbus3, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA)
ugen1.3: <ThinkPad Bluetooth with Enhanced Data Rate II Lenovo Computer Corp> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (100mA)