Regression between 9-RELEASE and 9-STABLE [PCIB ?]
Adrian Chadd
adrian at freebsd.org
Sat Mar 3 03:35:56 UTC 2012
Hi!
You now officially have enough information to fill out a PR! Thankyou
so very much for finding out which particular commit/commits caused
this regression for you!
http://www.freebsd.org/send-pr.html
Would you mind doing this? :)
Thanks!
Adrian
On 2 March 2012 18:50, Harry Newton <hn at yewbarrow.net> wrote:
> John, investigations shew bug introduced between 2012.02.23.22.26.00
> and 2012.02.23.22.26.30 in these files:
>
> Edit src/sys/dev/acpica/acpi.c
> Add delta 1.305.2.4 2012.02.23.22.26.14 jkim
> Edit src/sys/dev/acpica/acpi_ec.c
> Add delta 1.95.2.2 2012.02.23.22.26.14 jkim
> Edit src/sys/dev/acpica/acpi_hpet.c
> Add delta 1.38.2.2 2012.02.23.22.26.14 jkim
> Edit src/sys/dev/acpica/acpi_timer.c
> Add delta 1.50.2.3 2012.02.23.22.26.14 jkim
> Edit src/sys/dev/acpica/acpivar.h
> Add delta 1.125.2.4 2012.02.23.22.26.14 jkim
>
> More details below. Let me know if I can do anything else. - H
>
> * dmesg
> Table 'FACP' at 0x77fd0200
> Table 'APIC' at 0x77fd0390
> APIC: Found table at 0x77fd0390
> APIC: Using the MADT enumerator.
> MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
> SMP: Added CPU 0 (AP)
> MADT: Found CPU APIC ID 1 ACPI ID 2: enabled
> SMP: Added CPU 1 (AP)
> Copyright (c) 1992-2012 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 9.0-STABLE #19: Fri Mar 2 22:28:14 GMT 2012
> toor at hydra.yewbarrow.net:/usr/obj/usr/src/sys/HYDRA amd64
> WARNING: DIAGNOSTIC option enabled, expect reduced performance.
> Preloaded elf kernel "/boot/kernel.old/kernel" at 0xffffffff80b6f000.
> Calibrating TSC clock ... TSC clock: 2194794720 Hz
> CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (2194.79-MHz K8-class CPU)
> Origin = "AuthenticAMD" Id = 0x40fb2 Family = f Model = 4b Stepping = 2
> Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C
> MOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
> Features2=0x2001<SSE3,CX16>
> AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
> AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
> L1 2MB data TLB: 8 entries, fully associative
> L1 2MB instruction TLB: 8 entries, fully associative
> L1 4KB data TLB: 32 entries, fully associative
> L1 4KB instruction TLB: 32 entries, fully associative
> L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
> L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
> L2 2MB unified TLB: 0 entries, disabled/not present
> L2 4KB data TLB: 512 entries, 4-way associative
> L2 4KB instruction TLB: 512 entries, 4-way associative
> L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
> real memory = 2147483648 (2048 MB)
> Physical memory chunk(s):
> 0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
> 0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages)
> 0x0000000000b9e000 - 0x0000000074722fff, 1941458944 bytes (473989 pages)
> avail memory = 1926897664 (1837 MB)
> Event timer "LAPIC" quality 400
> ACPI APIC Table: <030107 APIC1519>
> INTR: Adding local APIC 1 as a target
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> FreeBSD/SMP: 1 package(s) x 2 core(s)
> cpu0 (BSP): APIC ID: 0
> cpu1 (AP): APIC ID: 1
> x86bios: IVT 0x000000-0x0004ff at 0xfffffe0000000000
> x86bios: SSEG 0x001000-0x001fff at 0xffffff800020d000
> x86bios: EBDA 0x09f000-0x09ffff at 0xfffffe000009f000
> x86bios: ROM 0x0a0000-0x0fefff at 0xfffffe00000a0000
> APIC: CPU 0 has ACPI ID 1
> APIC: CPU 1 has ACPI ID 2
> ULE: setup cpu 0
> ULE: setup cpu 1
> ACPI: RSDP 0xf96d0 00014 (v00 ACPIAM)
> ACPI: RSDT 0x77fd0000 00038 (v01 030107 RSDT1519 20070301 MSFT 00000097)
> ACPI: FACP 0x77fd0200 00084 (v02 030107 FACP1519 20070301 MSFT 00000097)
> ACPI: DSDT 0x77fd0430 044A0 (v01 1ADNC 1ADNCB33 00000B33 INTL 20051117)
> ACPI: FACS 0x77fde000 00040
> ACPI: APIC 0x77fd0390 0005C (v01 030107 APIC1519 20070301 MSFT 00000097)
> ACPI: MCFG 0x77fd03f0 0003C (v01 030107 OEMMCFG 20070301 MSFT 00000097)
> ACPI: OEMB 0x77fde040 00071 (v01 030107 OEMB1519 20070301 MSFT 00000097)
> ACPI: HPET 0x77fd48d0 00038 (v01 030107 OEMHPET 20070301 MSFT 00000097)
> MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
> ioapic0: Routing external 8259A's -> intpin 0
> MADT: Interrupt override: source 0, irq 2
> ioapic0: Routing IRQ 0 -> intpin 2
> MADT: Interrupt override: source 9, irq 9
> ioapic0: intpin 9 trigger: level
> ioapic0: intpin 9 polarity: low
> ioapic0 <Version 2.1> irqs 0-23 on motherboard
> cpu0 BSP:
> ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
> lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
> timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
> null: <null device, zero device>
> random: <entropy source, Software, Yarrow>
> io: <I/O>
> nfslock: pseudo-device
> kbd: new array size 4
> kbd1 at kbdmux0
> mem: <memory>
> acpi0: <030107 RSDT1519> on motherboard
> PCIe: Memory Mapped configuration base @ 0xe0000000
> ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
> ACPI: Executed 3 blocks of module-level executable AML code
> acpi0: Power Button (fixed)
> acpi0: reservation of fee00000, 1000 (3) failed
> acpi0: reservation of ffb80000, 80000 (3) failed
> acpi0: reservation of fff80000, 80000 (3) failed
> acpi0: reservation of 0, a0000 (3) failed
> acpi0: reservation of 100000, 77f00000 (3) failed
> ACPI timer: 1/1 1/2 0/3 1/2 1/2 1/2 1/3 1/2 1/2 1/2 -> 9
> Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
> acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
> cpu0: <ACPI CPU> on acpi0
> cpu0: switching to generic Cx mode
> cpu1: <ACPI CPU> on acpi0
> pci_link0: Index IRQ Rtd Ref IRQs
> Initial Probe 0 5 N 0 3 4 5 7 10 11 12 14 15
> Validation 0 5 N 0 3 4 5 7 10 11 12 14 15
> After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
> pci_link1: Index IRQ Rtd Ref IRQs
> Initial Probe 0 3 N 0 3 4 5 7 10 11 12 14 15
> Validation 0 3 N 0 3 4 5 7 10 11 12 14 15
> After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
> pci_link2: Index IRQ Rtd Ref IRQs
> Initial Probe 0 10 N 0 3 4 5 7 10 11 12 14 15
> Validation 0 10 N 0 3 4 5 7 10 11 12 14 15
> After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
> pci_link3: Index IRQ Rtd Ref IRQs
> Initial Probe 0 10 N 0 3 4 5 7 10 11 12 14 15
> Validation 0 10 N 0 3 4 5 7 10 11 12 14 15
> After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
> pci_link4: Index IRQ Rtd Ref IRQs
> Initial Probe 0 4 N 0 3 4 5 7 10 11 12 14 15
> Validation 0 4 N 0 3 4 5 7 10 11 12 14 15
> After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
> pci_link5: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
> Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
> After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
> pci_link6: Index IRQ Rtd Ref IRQs
> Initial Probe 0 11 N 0 3 4 5 7 10 11 12 14 15
> Validation 0 11 N 0 3 4 5 7 10 11 12 14 15
> After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
> pci_link7: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
> Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
> After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pci0: domain=0, physical bus=0
> found-> vendor=0x1002, dev=0x7910, revid=0x00
> domain=0, bus=0, slot=0, func=0
> class=06-00-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0006, statreg=0x2220, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x1002, dev=0x7912, revid=0x00
> domain=0, bus=0, slot=1, func=0
> class=06-04-00, hdrtype=0x01, mfdev=0
> cmdreg=0x0107, statreg=0x0230, cachelnsz=0 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x1002, dev=0x7917, revid=0x00
> domain=0, bus=0, slot=7, func=0
> class=06-04-00, hdrtype=0x01, mfdev=0
> cmdreg=0x0107, statreg=0x4010, cachelnsz=16 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
> powerspec 3 supports D0 D3 current D0
> MSI supports 1 message
> found-> vendor=0x1002, dev=0x4380, revid=0x00
> domain=0, bus=0, slot=18, func=0
> class=01-06-01, hdrtype=0x00, mfdev=0
> cmdreg=0x0107, statreg=0x0230, cachelnsz=16 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=a, irq=11
> powerspec 2 supports D0 D3 current D0
> map[10]: type I/O Port, range 32, base 0xb000, size 3, enabled
> map[14]: type I/O Port, range 32, base 0xa000, size 2, enabled
> map[18]: type I/O Port, range 32, base 0x9000, size 3, enabled
> map[1c]: type I/O Port, range 32, base 0x8000, size 2, enabled
> map[20]: type I/O Port, range 32, base 0x7000, size 4, enabled
> map[24]: type Memory, range 32, base 0xfe7ff800, size 10, enabled
> pcib0: matched entry for 0.18.INTA
> pcib0: slot 18 INTA hardwired to IRQ 22
> found-> vendor=0x1002, dev=0x4387, revid=0x00
> domain=0, bus=0, slot=19, func=0
> class=0c-03-10, hdrtype=0x00, mfdev=1
> cmdreg=0x0517, statreg=0x02a0, cachelnsz=16 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=a, irq=5
> map[10]: type Memory, range 32, base 0xfe7fe000, size 12, enabled
> pcib0: matched entry for 0.19.INTA
> pcib0: slot 19 INTA hardwired to IRQ 16
> ohci early: SMM active, request owner change
> found-> vendor=0x1002, dev=0x4388, revid=0x00
> domain=0, bus=0, slot=19, func=1
> class=0c-03-10, hdrtype=0x00, mfdev=0
> cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=b, irq=3
> map[10]: type Memory, range 32, base 0xfe7fd000, size 12, enabled
> pcib0: matched entry for 0.19.INTB
> pcib0: slot 19 INTB hardwired to IRQ 17
> ohci early: SMM active, request owner change
> found-> vendor=0x1002, dev=0x4389, revid=0x00
> domain=0, bus=0, slot=19, func=2
> class=0c-03-10, hdrtype=0x00, mfdev=0
> cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=c, irq=10
> map[10]: type Memory, range 32, base 0xfe7fc000, size 12, enabled
> pcib0: matched entry for 0.19.INTC
> pcib0: slot 19 INTC hardwired to IRQ 18
> ohci early: SMM active, request owner change
> found-> vendor=0x1002, dev=0x438a, revid=0x00
> domain=0, bus=0, slot=19, func=3
> class=0c-03-10, hdrtype=0x00, mfdev=0
> cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=b, irq=3
> map[10]: type Memory, range 32, base 0xfe7fb000, size 12, enabled
> pcib0: matched entry for 0.19.INTB
> pcib0: slot 19 INTB hardwired to IRQ 17
> ohci early: SMM active, request owner change
> found-> vendor=0x1002, dev=0x438b, revid=0x00
> domain=0, bus=0, slot=19, func=4
> class=0c-03-10, hdrtype=0x00, mfdev=0
> cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=c, irq=10
> map[10]: type Memory, range 32, base 0xfe7fa000, size 12, enabled
> pcib0: matched entry for 0.19.INTC
> pcib0: slot 19 INTC hardwired to IRQ 18
> ohci early: SMM active, request owner change
> found-> vendor=0x1002, dev=0x4386, revid=0x00
> domain=0, bus=0, slot=19, func=5
> class=0c-03-20, hdrtype=0x00, mfdev=0
> cmdreg=0x0117, statreg=0x02b0, cachelnsz=16 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=d, irq=10
> powerspec 2 supports D0 D1 D2 D3 current D0
> map[10]: type Memory, range 32, base 0xfe7ff000, size 8, enabled
> pcib0: matched entry for 0.19.INTD
> pcib0: slot 19 INTD hardwired to IRQ 19
> found-> vendor=0x1002, dev=0x4385, revid=0x13
> domain=0, bus=0, slot=20, func=0
> class=0c-05-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0403, statreg=0x0230, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> map[10]: type I/O Port, range 32, base 0xb00, size 4, enabled
> map[14]: type Memory, range 32, base 0xfed00000, size 10, enabled
> found-> vendor=0x1002, dev=0x438c, revid=0x00
> domain=0, bus=0, slot=20, func=1
> class=01-01-8a, hdrtype=0x00, mfdev=0
> cmdreg=0x0005, statreg=0x0230, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=a, irq=255
> MSI supports 1 message
> map[20]: type I/O Port, range 32, base 0xff00, size 4, enabled
> found-> vendor=0x1002, dev=0x4383, revid=0x00
> domain=0, bus=0, slot=20, func=2
> class=04-03-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0006, statreg=0x0410, cachelnsz=16 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=a, irq=5
> powerspec 2 supports D0 D3 current D0
> MSI supports 1 message, 64 bit
> map[10]: type Memory, range 64, base 0xfe7f4000, size 14, enabled
> pcib0: matched entry for 0.20.INTA
> pcib0: slot 20 INTA hardwired to IRQ 16
> found-> vendor=0x1002, dev=0x438d, revid=0x00
> domain=0, bus=0, slot=20, func=3
> class=06-01-00, hdrtype=0x00, mfdev=1
> cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x1002, dev=0x4384, revid=0x00
> domain=0, bus=0, slot=20, func=4
> class=06-04-01, hdrtype=0x01, mfdev=1
> cmdreg=0x0107, statreg=0x02a0, cachelnsz=0 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x1022, dev=0x1100, revid=0x00
> domain=0, bus=0, slot=24, func=0
> class=06-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x1022, dev=0x1101, revid=0x00
> domain=0, bus=0, slot=24, func=1
> class=06-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x1022, dev=0x1102, revid=0x00
> domain=0, bus=0, slot=24, func=2
> class=06-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x1022, dev=0x1103, revid=0x00
> domain=0, bus=0, slot=24, func=3
> class=06-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
> pcib1: domain 0
> pcib1: secondary bus 1
> pcib1: subordinate bus 1
> pcib1: I/O decode 0xc000-0xcfff
> pcib1: memory decode 0xfe800000-0xfe9fffff
> pcib1: prefetched decode 0xf0000000-0xf7ffffff
> pci1: <ACPI PCI bus> on pcib1
> pci1: domain=0, physical bus=1
> found-> vendor=0x1002, dev=0x791e, revid=0x00
> domain=0, bus=1, slot=5, func=0
> class=03-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=a, irq=10
> powerspec 2 supports D0 D1 D2 D3 current D0
> MSI supports 1 message, 64 bit
> map[10]: type Prefetchable Memory, range 64, base 0xf0000000, size 27, e
> nabled
> pcib1: requested memory range 0xf0000000-0xf7ffffff: good
> map[18]: type Memory, range 64, base 0xfe9f0000, size 16, enabled
> pcib1: requested memory range 0xfe9f0000-0xfe9fffff: good
> map[20]: type I/O Port, range 32, base 0xc000, size 8, enabled
> pcib1: requested I/O range 0xc000-0xc0ff: in range
> map[24]: type Memory, range 32, base 0xfe800000, size 20, enabled
> pcib1: requested memory range 0xfe800000-0xfe8fffff: good
> pcib1: matched entry for 1.5.INTA
> pcib1: slot 5 INTA hardwired to IRQ 18
> found-> vendor=0x1002, dev=0x7919, revid=0x00
> domain=0, bus=1, slot=5, func=2
> class=04-03-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=b, irq=10
> powerspec 2 supports D0 D3 current D0
> MSI supports 1 message, 64 bit
> map[10]: type Memory, range 64, base 0xfe9e8000, size 14, enabled
> pcib1: requested memory range 0xfe9e8000-0xfe9ebfff: good
> pcib1: matched entry for 1.5.INTB
> pcib1: slot 5 INTB hardwired to IRQ 19
> vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem 0xf0000000-0xf7ffffff,0
> xfe9f0000-0xfe9fffff,0xfe800000-0xfe8fffff irq 18 at device 5.0 on pci1
> pci1: <multimedia, HDA> at device 5.2 (no driver attached)
> pcib2: <ACPI PCI-PCI bridge> at device 7.0 on pci0
> pcib2: domain 0
> pcib2: secondary bus 2
> pcib2: subordinate bus 2
> pcib2: I/O decode 0xd000-0xdfff
> pcib2: memory decode 0xfea00000-0xfeafffff
> pcib2: no prefetched decode
> pci2: <ACPI PCI bus> on pcib2
> pci2: domain=0, physical bus=2
> found-> vendor=0x10ec, dev=0x8168, revid=0x01
> domain=0, bus=2, slot=0, func=0
> class=02-00-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0107, statreg=0x4010, cachelnsz=16 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=a, irq=10
> powerspec 2 supports D0 D1 D2 D3 current D0
> MSI supports 2 messages, 64 bit
> map[10]: type I/O Port, range 32, base 0xd800, size 8, enabled
> pcib2: requested I/O range 0xd800-0xd8ff: in range
> map[18]: type Memory, range 64, base 0xfeaff000, size 12, enabled
> pcib2: requested memory range 0xfeaff000-0xfeafffff: good
> pcib2: matched entry for 2.0.INTA
> pcib2: slot 0 INTA hardwired to IRQ 19
> re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port 0xd800-0xd8f
> f mem 0xfeaff000-0xfeafffff irq 19 at device 0.0 on pci2
> re0: MSI count : 2
> re0: MSI-X count : 0
> re0: attempting to allocate 1 MSI vectors (2 supported)
> msi: routing MSI IRQ 256 to local APIC 0 vector 49
> re0: using IRQ 256 for MSI
> re0: Using 1 MSI message
> re0: Chip rev. 0x38000000
> re0: MAC rev. 0x00000000
> miibus0: <MII bus> on re0
> rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
> rgephy0: OUI 0x00e04c, model 0x0011, rev. 2
> rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX
> , 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-
> master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
> re0: bpf attached
> re0: Ethernet address: 00:19:db:63:76:3e
> ahci0: <ATI IXP600 AHCI SATA controller> port 0xb000-0xb007,0xa000-0xa003,0x9000
> -0x9007,0x8000-0x8003,0x7000-0x700f mem 0xfe7ff800-0xfe7ffbff irq 22 at device 1
> 8.0 on pci0
> ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 50
> ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier supported
> ahci0: Caps: 64bit NCQ SNTF MPS AL CLO 3Gbps PM PMD 32cmd CCC 4ports
> ahci0: Caps2:
> ahcich0: <AHCI channel> at channel 0 on ahci0
> ahcich0: Caps: HPCP
> ahcich1: <AHCI channel> at channel 1 on ahci0
> ahcich1: Caps: HPCP
> ahcich2: <AHCI channel> at channel 2 on ahci0
> ahcich2: Caps: HPCP
> ahcich3: <AHCI channel> at channel 3 on ahci0
> ahcich3: Caps: HPCP
> ohci0: <OHCI (generic) USB controller> mem 0xfe7fe000-0xfe7fefff irq 16 at devic
> e 19.0 on pci0
> ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 51
> usbus0: <OHCI (generic) USB controller> on ohci0
> usbus0: bpf attached
> ohci0: usbpf: Attached
> ohci1: <OHCI (generic) USB controller> mem 0xfe7fd000-0xfe7fdfff irq 17 at devic
> e 19.1 on pci0
> ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 52
> usbus1: <OHCI (generic) USB controller> on ohci1
> usbus1: bpf attached
> ohci1: usbpf: Attached
> ohci2: <OHCI (generic) USB controller> mem 0xfe7fc000-0xfe7fcfff irq 18 at devic
> e 19.2 on pci0
> ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 53
> usbus2: <OHCI (generic) USB controller> on ohci2
> usbus2: bpf attached
> ohci2: usbpf: Attached
> ohci3: <OHCI (generic) USB controller> mem 0xfe7fb000-0xfe7fbfff irq 17 at devic
> e 19.3 on pci0
> usbus3: <OHCI (generic) USB controller> on ohci3
> usbus3: bpf attached
> ohci3: usbpf: Attached
> ohci4: <OHCI (generic) USB controller> mem 0xfe7fa000-0xfe7fafff irq 18 at devic
> e 19.4 on pci0
> usbus4: <OHCI (generic) USB controller> on ohci4
> usbus4: bpf attached
> ohci4: usbpf: Attached
> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe7ff000-0xfe7ff0ff irq 19 at d
> evice 19.5 on pci0
> ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 54
> ehci0: AMD SB600/700 quirk applied
> ehci0: Dropped interrupts workaround enabled
> usbus5: EHCI version 1.0
> usbus5: <EHCI (generic) USB 2.0 controller> on ehci0
> usbus5: bpf attached
> ehci0: usbpf: Attached
> pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
> atapci0: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x37
> 6,0xff00-0xff0f at device 20.1 on pci0
> ata0: <ATA channel> at channel 0 on atapci0
> ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 55
> pci0: <multimedia, HDA> at device 20.2 (no driver attached)
> isab0: <PCI-ISA bridge> at device 20.3 on pci0
> isa0: <ISA bus> on isab0
> pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
> pcib3: domain 0
> pcib3: secondary bus 3
> pcib3: subordinate bus 3
> pcib3: I/O decode 0xe000-0xefff
> pcib3: memory decode 0xfeb00000-0xfebfffff
> pcib3: no prefetched decode
> pcib3: Subtractively decoded bridge.
> pci3: <ACPI PCI bus> on pcib3
> pci3: domain=0, physical bus=3
> found-> vendor=0x1106, dev=0x3044, revid=0xc0
> domain=0, bus=3, slot=0, func=0
> class=0c-00-10, hdrtype=0x00, mfdev=0
> cmdreg=0x0117, statreg=0x0210, cachelnsz=16 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x20 (8000 ns)
> intpin=a, irq=4
> powerspec 2 supports D0 D2 D3 current D0
> map[10]: type Memory, range 32, base 0xfebff800, size 11, enabled
> pcib3: requested memory range 0xfebff800-0xfebfffff: good
> map[14]: type I/O Port, range 32, base 0xe800, size 7, enabled
> pcib3: requested I/O range 0xe800-0xe87f: in range
> pcib3: matched entry for 3.0.INTA
> pcib3: slot 0 INTA hardwired to IRQ 20
> pci3: <serial bus, FireWire> at device 0.0 (no driver attached)
> acpi_button0: <Power Button> on acpi0
> attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
> Timecounter "i8254" frequency 1193182 Hz quality 0
> ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 56
> Event timer "i8254" frequency 1193182 Hz quality 100
> atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
> atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.50
> 0000000s)
> ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 57
> Event timer "RTC" frequency 32768 Hz quality 0
> hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
> device_attach: hpet0 attach returned 12
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> atkbd: the current kbd controller command byte 0065
> atkbd: keyboard ID 0x41ab (2)
> kbd0 at atkbd0
> kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
> ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 58
> atkbd0: [GIANT-LOCKED]
> psm0: unable to allocate IRQ
> acpi0: wakeup code va 0xffffff8087fae000 pa 0x4000
> isa_probe_children: disabling PnP devices
> atkbdc: atkbdc0 already exists; skipping it
> atrtc: atrtc0 already exists; skipping it
> attimer: attimer0 already exists; skipping it
> sc: sc0 already exists; skipping it
> isa_probe_children: probing non-PnP devices
> orm0: <ISA Option ROM> at iomem 0xcd800-0xce7ff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
> ppc0 failed to probe at irq 7 on isa0
> uart0 failed to probe at port 0x3f8 irq 4 on isa0
> uart1 failed to probe at port 0x2f8 irq 3 on isa0
> isa_probe_children: probing PnP devices
> acpi_throttle0: <ACPI CPU Throttling> on cpu0
> acpi_throttle0: CLK_VAL field overlaps THT_EN bit
> device_attach: acpi_throttle0 attach returned 6
> powernow0: <PowerNow! K8> on cpu0
> powernow0: STATUS: 0x310a120c0a0e020e
> powernow0: STATUS: maxfid: 0x0e
> powernow0: STATUS: maxvid: 0x0a
> device_attach: powernow0 attach returned 6
> powernow1: <PowerNow! K8> on cpu1
> powernow1: STATUS: 0x310a120c0a0e020e
> powernow1: STATUS: maxfid: 0x0e
> powernow1: STATUS: maxvid: 0x0a
> device_attach: powernow1 attach returned 6
> Device configuration finished.
> procfs registered
> lapic: Divisor 2, Frequency 99761963 Hz
> Timecounters tick every 1.000 msec
> vlan: initialized, using hash tables with chaining
> lo0: bpf attached
> usbus0: 12Mbps Full Speed USB v1.0
> usbus1: 12Mbps Full Speed USB v1.0
> usbus2: 12Mbps Full Speed USB v1.0
> usbus3: 12Mbps Full Speed USB v1.0
> usbus4: 12Mbps Full Speed USB v1.0
> usbus5: 480Mbps High Speed USB v2.0
> ahcich0: AHCI reset...
> ahcich0: SATA connect time=100us status=00000123
> ahcich0: AHCI reset: device found
> ahcich1: AHCI reset...
> ahcich1: SATA connect time=100us status=00000123
> ahcich1: AHCI reset: device found
> ahcich2: AHCI reset...
> ahcich2: SATA connect time=100us status=00000123
> ahcich2: AHCI reset: device found
> ahcich3: AHCI reset...
> ahcich3: SATA connect time=100us status=00000123
> ahcich3: AHCI reset: device found
> ugen0.1: <ATI> at usbus0
> uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
> ugen1.1: <ATI> at usbus1
> uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
> ugen2.1: <ATI> at usbus2
> uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
> ugen3.1: <ATI> at usbus3
> uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
> ugen4.1: <ATI> at usbus4
> uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
> ugen5.1: <ATI> at usbus5
> uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
> ata0: reset tp1 mask=03 ostat0=50 ostat1=50
> ahcich0: AHCI reset: device ready after 100ms
> Expensive timeout(9) function: 0xffffffff802db3d0(0xfffffe00015abb00) 0.05421135
> 9 s
> (aprobe0:ahcich0:0:15:0): Command timed out
> (aprobe0:ahcich0:0:15:0): Error 5, Retries exhausted
> (aprobe0:ahcich0:0:0:0): SIGNATURE: 0000
> ahcich1: AHCI reset: device ready after 100ms
> (aprobe1:ahcich1:0:15:0): Command timed out
> (aprobe1:ahcich1:0:15:0): Error 5, Retries exhausted
> (aprobe0:ahcich1:0:0:0): SIGNATURE: 0000
> ahcich2: AHCI reset: device ready after 100ms
> (aprobe2:ahcich2:0:15:0): Command timed out
> (aprobe2:ahcich2:0:15:0): Error 5, Retries exhausted
> (aprobe0:ahcich2:0:0:0): SIGNATURE: 0000
> ahcich3: AHCI reset: device ready after 100ms
> (aprobe3:ahcich3:0:15:0): Command timed out
> (aprobe3:ahcich3:0:15:0): Error 5, Retries exhausted
> (aprobe0:ahcich3:0:0:0): SIGNATURE: 0000
> ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
> ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
> ata0: reset tp2 stat0=00 stat1=00 devices=0x30000
> (aprobe1:ata0:0:0:0): SIGNATURE: eb14
> (aprobe0:ata0:0:1:0): SIGNATURE: eb14
> pass0 at ahcich0 bus 0 scbus0 target 0 lun 0
> pass0: <ST3320620AS 3.AAK> ATA-7 SATA 2.x device
> pass0: Serial Number 6QF0W6RN
> GEOM: new disk cd0
> GEOM: new disk cd1
> pass0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
> pass0: Command Queueing enabled
> (cd0:ata0:0:0:0): SCSI status error
> (cd0:ata0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
> (cd0:ata0:0:0:0): CAM status: SCSI Status Error
> (cd0:ata0:0:0:0): SCSI status: Check Condition
> (cd0:ata0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
> (cd0:ata0:0:0:0): Error 6, Unretryable error
> cd0 at ata0 bus 0 scbus4 target 0 lun 0
> cd0: <LITE-ON CD-RW SOHR-5239V 2$0A> Removable CD-ROM SCSI-0 device
> cd0: Serial Number 2005082900
> cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
> cd0: Attempt to query device size failed: NOT READY, Medium not present
> pass1 at ahcich1 bus 0 scbus1 target 0 lun 0
> pass1: <ST2000DM001-9YN164 CC46> ATA-8 SATA 3.x device
> pass1: Serial Number W24044SM
> pass1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
> pass1: Command Queueing enabled
> pass2 at ahcich2 bus 0 scbus2 target 0 lun 0
> (cd1:ata0:0:1:0): SCSI status error
> (cd1:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
> (cd1:ata0:0:1:0): CAM status: SCSI Status Error
> (cd1:ata0:0:1:0): SCSI status: Check Condition
> (cd1:ata0:0:1:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray clos
> ed)
> (cd1:ata0:0:1:0): Error 6, Unretryable error
> cd1 at ata0 bus 0 scbus4 target 1 lun 0
> cd1: <ATAPI DVD D DH16D2P HP55> Removable CD-ROM SCSI-0 device
> cd1: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
> cd1: Attempt to query device size failed: NOT READY, Medium not present - tray c
> losed
> pass2: <ST3320620AS 3.AAK> ATA-7 SATA 2.x device
> pass2: Serial Number 6QF0ZTQM
> pass2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
> pass2: Command Queueing enabled
> pass3 at ahcich3 bus 0 scbus3 target 0 lun 0
> pass3: <ST2000DM001-9YN164 CC46> ATA-8 SATA 3.x device
> pass3: Serial Number W240643V
> pass3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
> pass3: Command Queueing enabled
> pass4 at ata0 bus 0 scbus4 target 0 lun 0
> pass4: <LITE-ON CD-RW SOHR-5239V 2$0A> Removable CD-ROM SCSI-0 device
> pass4: Serial Number 2005082900
> pass4: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
> (cd0:ata0:0:0:0): SCSI status error
> (cd0:ata0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
> (cd0:ata0:0:0:0): CAM status: SCSI Status Error
> (cd0:ata0:0:0:0): SCSI status: Check Condition
> (cd0:ata0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
> (cd0:ata0:0:0:0): Error 6, Unretryable error
> pass5 at ata0 bus 0 scbus4 target 1 lun 0
> pass5: <ATAPI DVD D DH16D2P HP55> Removable CD-ROM SCSI-0 device
> pass5: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
> ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
> ada0: <ST3320620AS 3.AAK> ATA-7 SATA 2.x device
> ada0: Serial Number 6QF0W6RN
> ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
> ada0: Command Queueing enabled
> ada0: 305245MB (625142448 512 byte sectors: 16H 63S/T 16383C)
> ada0: Previously was known as ad4
> ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
> ada1: <ST2000DM001-9YN164 CC46> ATA-8 SATA 3.x device
> ada1: Serial Number W24044SM
> (cd0:ata0:0:0:0): SCSI status error
> (cd0:ata0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
> (cd0:ata0:0:0:0): CAM status: SCSI Status Error
> uhub0: 2 ports with 2 removable, self powered
> uhub1: 2 ports with 2 removable, self powered
> uhub2: 2 ports with 2 removable, self powered
> uhub3: 2 ports with 2 removable, self powered
> uhub4: 2 ports with 2 removable, self powered
> (cd0:ata0:0:0:0): SCSI status: Check Condition
> (cd0:ata0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
> (cd0:ata0:0:0:0): Error 6, Unretryable error
> ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
> ada1: Command Queueing enabled
> ada1: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
> ada1: Previously was known as ad6
> ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
> ada2: <ST3320620AS 3.AAK> ATA-7 SATA 2.x device
> ada2: Serial Number 6QF0ZTQM
> ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
> ada2: Command Queueing enabled
> ada2: 305245MB (625142448 512 byte sectors: 16H 63S/T 16383C)
> ada2: Previously was known as ad8
> ada3 at ahcich3 bus 0 scbus3 target 0 lun 0
> ada3: <ST2000DM001-9YN164 CC46> ATA-8 SATA 3.x device
> (cd0:ata0:0:0:0): SCSI status error
> (cd0:ata0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
> (cd0:ata0:0:0:0): CAM status: SCSI Status Error
> (cd0:ata0:0:0:0): SCSI status: Check Condition
> (cd0:ata0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
> (cd0:ata0:0:0:0): Error 6, Unretryable error
> ada3: Serial Number W240643V
> ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
> ada3: Command Queueing enabled
> ada3: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
> ada3: Previously was known as ad10
> SMP: AP CPU #1 Launched!
> cpu1 AP:
> ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
> lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
> timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
> TSC timecounter discards lower 8 bit(s)
> Timecounter "TSC-low" frequency 8573416 Hz quality -100
> WARNING: DIAGNOSTIC option enabled, expect reduced performance.
> (cd1:ata0:0:1:0): SCSI status error
> (cd1:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
> (cd1:ata0:0:1:0): CAM status: SCSI Status Error
> (cd1:ata0:0:1:0): SCSI status: Check Condition
> (cd1:ata0:0:1:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray clos
> ed)
> (cd1:ata0:0:1:0): Error 6, Unretryable error
> (cd1:ata0:0:1:0): SCSI status error
> (cd1:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
> (cd1:ata0:0:1:0): CAM status: SCSI Status Error
> (cd1:ata0:0:1:0): SCSI status: Check Condition
> (cd1:ata0:0:1:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray clos
> ed)
> (cd1:ata0:0:1:0): Error 6, Unretryable error
> (cd1:ata0:0:1:0): SCSI status error
> (cd1:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
> (cd1:ata0:0:1:0): CAM status: SCSI Status Error
> (cd1:ata0:0:1:0): SCSI status: Check Condition
> (cd1:ata0:0:1:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray clos
> ed)
> (cd1:ata0:0:1:0): Error 6, Unretryable error
> GEOM: new disk ada0
> GEOM: new disk ada1
> GEOM: new disk ada2
> GEOM: new disk ada3
> GEOM: ada2s1: geometry does not match label (255h,63s != 16h,63s).
> GEOM: ada2s1: media size does not match label.
> Root mount waiting for: usbus5
> Root mount waiting for: usbus5
> Root mount waiting for: usbus5
> uhub5: 10 ports with 10 removable, self powered
> Root mount waiting for: usbus5
> Trying to mount root from ufs:/dev/ada0p2 [rw]...
> start_init: trying /sbin/init
> ugen1.2: <vendor 0x2222> at usbus1
> ums0: <vendor 0x2222 Evoluent Vertical Mouse 2, class 0/0, rev 1.10/51.26, addr
> 2> on usbus1
> ums0: 5 buttons and [XYZ] coordinates ID=0
> ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
> to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
> ZFS filesystem version 5
> ZFS storage pool version 28
> * csup
> --------------------------------------------------------------
>>>> Running /usr/bin/csup
> --------------------------------------------------------------
> Parsing supfile "/root/csup/date-supfile"
> Connecting to cvsup.uk.freebsd.org
> Cannot connect to 2001:630:212:8:20e:cff:fe09:a69c: Protocol not supported
> Connected to 131.111.8.41
> Server software version: SNAP_16_1h
> MD5 authentication started
> MD5 authentication successful
> Negotiating file attribute support
> Exchanging collection information
> Establishing multiplexed-mode data connection
> Running
> Updating collection src-all/cvs
> Edit src/sys/dev/acpica/acpi.c
> Add delta 1.305.2.4 2012.02.23.22.26.14 jkim
> Edit src/sys/dev/acpica/acpi_ec.c
> Add delta 1.95.2.2 2012.02.23.22.26.14 jkim
> Edit src/sys/dev/acpica/acpi_hpet.c
> Add delta 1.38.2.2 2012.02.23.22.26.14 jkim
> Edit src/sys/dev/acpica/acpi_timer.c
> Add delta 1.50.2.3 2012.02.23.22.26.14 jkim
> Edit src/sys/dev/acpica/acpivar.h
> Add delta 1.125.2.4 2012.02.23.22.26.14 jkim
> Shutting down connection to server
> Finished successfully
> * supfil
> *default host=cvsup.uk.freebsd.org
> *default base=/var/db
> *default prefix=/usr
> *default release=cvs tag=RELENG_9
>
> # ok:
> # *default date=2012.02.23.22.26.00
> # fail:
> *default date=2012.02.23.22.26.30
>
> *default delete use-rel-suffix
> *default compress
> src-all
> * pciconf -lvb
> hostb0 at pci0:0:0:0: class=0x060000 card=0x79101002 chip=0x79101002 rev=0x00
> hdr=0x00
> vendor = 'ATI Technologies Inc'
> device = 'RS690 Host Bridge'
> class = bridge
> subclass = HOST-PCI
> pcib1 at pci0:0:1:0: class=0x060400 card=0x79121002 chip=0x79121002 rev=0x00
> hdr=0x01
> vendor = 'ATI Technologies Inc'
> device = 'RS690 PCI to PCI Bridge (Internal gfx)'
> class = bridge
> subclass = PCI-PCI
> pcib2 at pci0:0:7:0: class=0x060400 card=0x79101002 chip=0x79171002 rev=0x00
> hdr=0x01
> vendor = 'ATI Technologies Inc'
> device = 'RS690 PCI to PCI Bridge (PCI Express Port 3)'
> class = bridge
> subclass = PCI-PCI
> ahci0 at pci0:0:18:0: class=0x010601 card=0x73291462 chip=0x43801002 rev=0x00
> hdr=0x00
> vendor = 'ATI Technologies Inc'
> device = 'SB600 Non-Raid-5 SATA'
> class = mass storage
> subclass = SATA
> bar [10] = type I/O Port, range 32, base 0xb000, size 8, enabled
> bar [14] = type I/O Port, range 32, base 0xa000, size 4, enabled
> bar [18] = type I/O Port, range 32, base 0x9000, size 8, enabled
> bar [1c] = type I/O Port, range 32, base 0x8000, size 4, enabled
> bar [20] = type I/O Port, range 32, base 0x7000, size 16, enabled
> bar [24] = type Memory, range 32, base 0xfe7ff800, size 1024, enabled
> ohci0 at pci0:0:19:0: class=0x0c0310 card=0x73271462 chip=0x43871002 rev=0x00
> hdr=0x00
> vendor = 'ATI Technologies Inc'
> device = 'SB600 USB (OHCI0)'
> class = serial bus
> subclass = USB
> bar [10] = type Memory, range 32, base 0xfe7fe000, size 4096, enabled
> ohci1 at pci0:0:19:1: class=0x0c0310 card=0x73271462 chip=0x43881002 rev=0x00
> hdr=0x00
> vendor = 'ATI Technologies Inc'
> device = 'SB600 USB (OHCI1)'
> class = serial bus
> subclass = USB
> bar [10] = type Memory, range 32, base 0xfe7fd000, size 4096, enabled
> ohci2 at pci0:0:19:2: class=0x0c0310 card=0x73271462 chip=0x43891002 rev=0x00
> hdr=0x00
> vendor = 'ATI Technologies Inc'
> device = 'SB600 USB (OHCI2)'
> class = serial bus
> subclass = USB
> bar [10] = type Memory, range 32, base 0xfe7fc000, size 4096, enabled
> ohci3 at pci0:0:19:3: class=0x0c0310 card=0x73271462 chip=0x438a1002 rev=0x00
> hdr=0x00
> vendor = 'ATI Technologies Inc'
> device = 'SB600 USB (OHCI3)'
> class = serial bus
> subclass = USB
> bar [10] = type Memory, range 32, base 0xfe7fb000, size 4096, enabled
> ohci4 at pci0:0:19:4: class=0x0c0310 card=0x73271462 chip=0x438b1002 rev=0x00
> hdr=0x00
> vendor = 'ATI Technologies Inc'
> device = 'SB600 USB (OHCI4)'
> class = serial bus
> subclass = USB
> bar [10] = type Memory, range 32, base 0xfe7fa000, size 4096, enabled
> ehci0 at pci0:0:19:5: class=0x0c0320 card=0x73271462 chip=0x43861002 rev=0x00
> hdr=0x00
> vendor = 'ATI Technologies Inc'
> device = 'SB600 USB Controller (EHCI)'
> class = serial bus
> subclass = USB
> bar [10] = type Memory, range 32, base 0xfe7ff000, size 256, enabled
> none0 at pci0:0:20:0: class=0x0c0500 card=0x73271462 chip=0x43851002 rev=0x13
> hdr=0x00
> vendor = 'ATI Technologies Inc'
> device = 'SBx00 SMBus Controller'
> class = serial bus
> subclass = SMBus
> bar [10] = type I/O Port, range 32, base 0xb00, size 16, enabled
> bar [14] = type Memory, range 32, base 0xfed00000, size 1024, enabled
> atapci0 at pci0:0:20:1: class=0x01018a card=0x73271462 chip=0x438c1002 rev=0x00
> hdr=0x00
> vendor = 'ATI Technologies Inc'
> device = 'SB600 IDE'
> class = mass storage
> subclass = ATA
> bar [20] = type I/O Port, range 32, base 0xff00, size 16, enabled
> none1 at pci0:0:20:2: class=0x040300 card=0x73271462 chip=0x43831002 rev=0x00
> hdr=0x00
> vendor = 'ATI Technologies Inc'
> device = 'SBx00 Azalia (Intel HDA)'
> class = multimedia
> subclass = HDA
> bar [10] = type Memory, range 64, base 0xfe7f4000, size 16384, enabled
> isab0 at pci0:0:20:3: class=0x060100 card=0x73271462 chip=0x438d1002 rev=0x00
> hdr=0x00
> vendor = 'ATI Technologies Inc'
> device = 'SB600 PCI to LPC Bridge'
> class = bridge
> subclass = PCI-ISA
> pcib3 at pci0:0:20:4: class=0x060401 card=0x00000000 chip=0x43841002 rev=0x00
> hdr=0x01
> vendor = 'ATI Technologies Inc'
> device = 'SBx00 PCI to PCI Bridge'
> class = bridge
> subclass = PCI-PCI
> hostb1 at pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x11001022 rev=0x00
> hdr=0x00
> vendor = 'Advanced Micro Devices [AMD]'
> device = 'K8 [Athlon64/Opteron] HyperTransport Technology Configuration'
>
> class = bridge
> subclass = HOST-PCI
> hostb2 at pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x11011022 rev=0x00
> hdr=0x00
> vendor = 'Advanced Micro Devices [AMD]'
> device = 'K8 [Athlon64/Opteron] Address Map'
> class = bridge
> subclass = HOST-PCI
> hostb3 at pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x11021022 rev=0x00
> hdr=0x00
> vendor = 'Advanced Micro Devices [AMD]'
> device = 'K8 [Athlon64/Opteron] DRAM Controller'
> class = bridge
> subclass = HOST-PCI
> hostb4 at pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x11031022 rev=0x00
> hdr=0x00
> vendor = 'Advanced Micro Devices [AMD]'
> device = 'K8 [Athlon64/Opteron] Miscellaneous Control'
> class = bridge
> subclass = HOST-PCI
> vgapci0 at pci0:1:5:0: class=0x030000 card=0x73271462 chip=0x791e1002 rev=0x00
> hdr=0x00
> vendor = 'ATI Technologies Inc'
> device = 'RS690 [Radeon X1200 Series]'
> class = display
> subclass = VGA
> bar [10] = type Prefetchable Memory, range 64, base 0xf0000000, size 13421
> 7728, enabled
> bar [18] = type Memory, range 64, base 0xfe9f0000, size 65536, enabled
> bar [20] = type I/O Port, range 32, base 0xc000, size 256, enabled
> bar [24] = type Memory, range 32, base 0xfe800000, size 1048576, enabled
> none2 at pci0:1:5:2: class=0x040300 card=0x79191002 chip=0x79191002 rev=0x00
> hdr=0x00
> vendor = 'ATI Technologies Inc'
> device = 'Radeon X1200 Series Audio Controller'
> class = multimedia
> subclass = HDA
> bar [10] = type Memory, range 64, base 0xfe9e8000, size 16384, enabled
> re0 at pci0:2:0:0: class=0x020000 card=0x327c1462 chip=0x816810ec rev=0x01 hdr=0x00
>
> vendor = 'Realtek Semiconductor Co., Ltd.'
> device = 'RTL8111/8168B PCI Express Gigabit Ethernet controller'
> class = network
> subclass = ethernet
> bar [10] = type I/O Port, range 32, base 0xd800, size 256, enabled
> bar [18] = type Memory, range 64, base 0xfeaff000, size 4096, enabled
> none3 at pci0:3:0:0: class=0x0c0010 card=0x086c0574 chip=0x30441106 rev=0xc0
> hdr=0x00
> vendor = 'VIA Technologies, Inc.'
> device = 'VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller'
> class = serial bus
> subclass = FireWire
> bar [10] = type Memory, range 32, base 0xfebff800, size 2048, enabled
> bar [14] = type I/O Port, range 32, base 0xe800, size 128, enabled
>
>
>
> On 29 February 2012 14:12, John Baldwin <jhb at freebsd.org> wrote:
>> On Tuesday, February 28, 2012 6:10:51 pm Harry Newton wrote:
>>> Adrian - thanks !
>>>
>>> John, if you write me a shopping list of what information you think
>>> useful, assuming you have time and inclination, I'll do my best
>>> provide it.
>>
>> Mostly a verbose boot of 9.0-RELEASE and what you see now. If anything the
>> only changes I can think of since the release are to make some of the PCI code
>> more lenient. You could also try to narrow down exactly which revision causes
>> the hang using a binary search of 9.0-STABLE since the release.
>>
>> --
>> John Baldwin
>
>
>
> --
> Harry Newton
More information about the freebsd-stable
mailing list