known problems with 8.x and HP DL16 G5 server?
slw at zxy.spb.ru
Fri Feb 10 13:49:49 UTC 2012
On Thu, Feb 09, 2012 at 10:24:11PM -0800, Jeremy Chadwick wrote:
> On Thu, Feb 09, 2012 at 04:02:12PM -0800, Julian Elischer wrote:
> > On 2/9/12 1:56 PM, Jeremy Chadwick wrote:
> > >On Thu, Feb 09, 2012 at 01:48:29PM -0800, Julian Elischer wrote:
> > >>does anyone know of problems with freebsd and this system?
> > >>
> > >>the kernel We tried to boot seems to stop somewhere in the ahci probing.
> > >Few things:
> > >
> > >1) Possible to get full console output (e.g. serial, etc.) from a verbose
> > >boot?
> > it's freebsd 8.2 from a TrueNAS/FreeNAS. I'm actually at ix-systems
> > at the
> > moment.. but I wasnhoping someone could save us some time by saying
> > "Oh yeah, merge in change number xxxxxx"
> > >2) Can you also provide the exact release/tag/kernel/thing you're trying
> > >to install or upgrade to ("8.x" is a little vague; there are all sorts
> > >of changes that happen between tags). For example 8.1 is not going to
> > >behave the same necessarily as 8.2.
> > >
> > >3) When you say "ahci probing", are you booting a standard installation
> > >CD/DVD/memstick of, say, 8.2? If so, those won't make use of the
> > >AHCI-to-CAM translation layer (and that AHCI code is also different than
> > >the native-ATA-AHCI code), so you might try, when booting the system,
> > >dropping to the loader prompt and issuing "load ahci.ko" before typing
> > >"boot". See if that helps. If it does, great, use it (ahci_load="yes"
> > >in /boot/loader.conf) permanently (and benefit from things like NCQ
> > >too).
> > let me forward you an image...
> > >4) If it's an Intel ESB2 controller, I believe there were some fixes or
> > >identification shims put in place for this in recent RELENG_8, which
> > >wouldn't be available in RELENG_8_2 or 8.2-RELEASE CD/DVDs. I could be
> > >remembering the wrong controller though. Hmm...
> > >
> > that may be what we are looking for.
> > I'll try get more info.
> For others: the last few lines in the kernel log are:
> acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
> acpi_hpet0: vend: 0x8086 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route 64-bit
> Timecounter "HPET" frequency 14318180 Hz quality 900
> acpi: wakeup code va 0xffffff848311d000 pa 0x4000
> ahc_isa_probe 0: ioport 0xc00 alloc failed
> I don't see any indication of AHCI problems here (or AHCI at all).
> ahc_isa_probe is for the ahc(4) controller -- Adaptec SCSI.
> A verbose boot might be more helpful.
Can you tru hint.ahc.0.disabled="1" ?
More information about the freebsd-stable