modem support MT9234ZPX-PCIE-NV

[Mike Tancsa]

On 5/27/2011 12:00 PM, John Baldwin wrote:
>>
>> uart2 at pci0:5:0:0:       class=0x070002 card=0x20282205 chip=0x015213a8
>> rev=0x02 hdr=0x00
>>     vendor     = 'Exar Corp.'
>>     device     = 'XR17C/D152 Dual PCI UART'
>>     class      = simple comms
>>     subclass   = UART
> 
> Possibly.  Did you try adding it via puc instead?

Yes, same result. But I am not sure what values to plugin for some of
the options.

I tried this is uart

1(ich10)# diff -u uart_bus_pci.c.orig uart_bus_pci.c
--- uart_bus_pci.c.orig 2011-05-24 17:10:21.000000000 -0400
+++ uart_bus_pci.c      2011-05-27 10:49:05.000000000 -0400
@@ -110,6 +110,8 @@
 { 0x1415, 0x950b, 0xffff, 0, "Oxford Semiconductor OXCB950 Cardbus
16950 UART",
        0x10, 16384000 },
 { 0x151f, 0x0000, 0xffff, 0, "TOPIC Semiconductor TP560 56k modem", 0x10 },
+{ 0x13a8, 0x0152, 0x2205, 0x2028, "MultiTech MultiModem ZPX", 0x10,
+       8 * DEFAULT_RCLK },
 { 0x9710, 0x9835, 0x1000, 1, "NetMos NM9835 Serial Port", 0x10 },
 { 0x9710, 0x9865, 0xa000, 0x1000, "NetMos NM9865 Serial Port", 0x10 },
 { 0x9710, 0x9901, 0xa000, 0x1000,
1(ich10)#

Then I removed the entry from uart and added the following for pucdata.c


        {   0x13a8, 0x0152, 0xffff, 0,
            "Exar Multitech",
            DEFAULT_RCLK * 8,
            PUC_PORT_2S, 0x10, 0, -1,
        },

But it does not seem to want to attach ?

	---Mike
-- 
-------------------
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, mike at sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canada   http://www.tancsa.com/