em0 watchdog timeouts on 8-STABLE
Joshua Boyd
boydjd at jbip.net
Thu Jun 16 00:37:23 UTC 2011
In the kernel. Here's my kernel configuration:
http://pastebin.com/raw.php?i=4JL814m3
On Wed, Jun 15, 2011 at 8:20 PM, Jack Vogel <jfvogel at gmail.com> wrote:
> I have hardware now, am working on reproducing this. Just curious, do you
> have
> the em driver defined in the kernel, or as a module?
>
> Jack
>
>
> On Wed, Jun 15, 2011 at 2:09 AM, Joshua Boyd <boydjd at jbip.net> wrote:
>
>> On Wed, Jun 15, 2011 at 3:57 AM, Jeremy Chadwick
>> <freebsd at jdc.parodius.com>wrote:
>>
>> > On Wed, Jun 15, 2011 at 03:14:43AM -0400, Joshua Boyd wrote:
>> > > I recently updated my server to the latest 8-STABLE, and upgraded to
>> v28
>> > > ZFS. I have not had these problems on any other version of 8-STABLE or
>> > > 7-STABLE, which this box was upgraded from some time ago.
>> > >
>> > > Now, during my weekly scrub, I get the following messages and em0 is
>> > > unresponsive:
>> > >
>> > > Jun 12 03:07:58 foghornleghorn kernel: em0: Watchdog timeout --
>> resetting
>> > > Jun 12 03:07:58 foghornleghorn kernel: em0: link state changed to DOWN
>> > > Jun 12 03:08:01 foghornleghorn kernel: em0: link state changed to UP
>> > > Jun 12 03:08:47 foghornleghorn kernel: em0: Watchdog timeout --
>> resetting
>> > > Jun 12 03:08:47 foghornleghorn kernel: em0: link state changed to DOWN
>> > > Jun 12 03:08:50 foghornleghorn kernel: em0: link state changed to UP
>> > >
>> > > My scrub is scheduled to start at 03:00:00, so it looks like watchdog
>> > > timeouts start occurring pretty quickly once I/O ramps up.
>> > >
>> > > Here's some possibly relevant information, let me know if anything
>> else
>> > > would be helpful to troubleshoot.
>> > >
>> > > FreeBSD foghornleghorn.res.openband.net 8.2-STABLE FreeBSD 8.2-STABLE
>> > #17:
>> > > Mon Jun 6 19:40:19 EDT 2011
>> > > root at foghornleghorn.res.openband.net:
>> /usr/obj/usr/src/sys/FOGHORNLEGHORN
>> > > amd64
>> > >
>> > > em0: <Intel(R) PRO/1000 Legacy Network Connection 1.0.3> port
>> > 0xe800-0xe83f
>> > > mem 0xfebe0000-0xfebfffff,0xfebc0000-0xfebdffff irq 20 at device 5.0
>> on
>> > pci7
>> > >
>> > > em0 at pci0:7:5:0: class=0x020000 card=0x13768086 chip=0x107c8086
>> rev=0x05
>> > > hdr=0x00
>> > > vendor = 'Intel Corporation'
>> > > device = 'Gigabit Ethernet Controller (Copper) rev 5
>> (82541PI)'
>> > > class = network
>> > > subclass = ethernet
>> > >
>> > > And, the SAS cards:
>> > >
>> > > dev.mpt.0.%desc: LSILogic SAS/SATA Adapter
>> > > dev.mpt.0.%driver: mpt
>> > > dev.mpt.0.%location: slot=0 function=0
>> > > dev.mpt.0.%pnpinfo: vendor=0x1000 device=0x0058 subvendor=0x15d9
>> > > subdevice=0xa580 class=0x010000
>> > > dev.mpt.0.%parent: pci1
>> > > dev.mpt.0.debug: 3
>> > > dev.mpt.0.role: 1
>> > > dev.mpt.1.%desc: LSILogic SAS/SATA Adapter
>> > > dev.mpt.1.%driver: mpt
>> > > dev.mpt.1.%location: slot=0 function=0
>> > > dev.mpt.1.%pnpinfo: vendor=0x1000 device=0x0058 subvendor=0x15d9
>> > > subdevice=0xa580 class=0x010000
>> > > dev.mpt.1.%parent: pci2
>> > > dev.mpt.1.debug: 3
>> > > dev.mpt.1.role: 1
>> > > dev.mpt.2.%desc: LSILogic SAS/SATA Adapter
>> > > dev.mpt.2.%driver: mpt
>> > > dev.mpt.2.%location: slot=0 function=0
>> > > dev.mpt.2.%pnpinfo: vendor=0x1000 device=0x0058 subvendor=0x1000
>> > > subdevice=0x30a0 class=0x010000
>> > > dev.mpt.2.%parent: pci6
>> > > dev.mpt.2.debug: 3
>> > > dev.mpt.2.role: 1
>> >
>> > Please provide output from the following commands (as root):
>> >
>> > # pciconf -lvcb
>> >
>>
>> hostb0 at pci0:0:0:0: class=0x060000 card=0x59561002 chip=0x59561002
>> rev=0x00
>> hdr=0x00
>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>> device = 'RD790 GFX Dual Slot'
>> class = bridge
>> subclass = HOST-PCI
>> pcib1 at pci0:0:2:0: class=0x060400 card=0x59561002 chip=0x59781002 rev=0x00
>> hdr=0x01
>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>> device = 'RD790 PCI to PCI bridge (external gfx0 port A)'
>> class = bridge
>> subclass = PCI-PCI
>> pcib2 at pci0:0:3:0: class=0x060400 card=0x59561002 chip=0x59791002 rev=0x00
>> hdr=0x01
>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>> device = 'RD790 PCI to PCI bridge (external gfx0 port B)'
>> class = bridge
>> subclass = PCI-PCI
>> pcib3 at pci0:0:4:0: class=0x060400 card=0x59561002 chip=0x597a1002 rev=0x00
>> hdr=0x01
>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>> device = 'RD790 PCI to PCI bridge (PCIe gpp port A)'
>> class = bridge
>> subclass = PCI-PCI
>> pcib4 at pci0:0:6:0: class=0x060400 card=0x59561002 chip=0x597c1002 rev=0x00
>> hdr=0x01
>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>> device = 'RD790 PCI to PCI bridge (PCIe gpp port C)'
>> class = bridge
>> subclass = PCI-PCI
>> pcib5 at pci0:0:7:0: class=0x060400 card=0x59561002 chip=0x597d1002 rev=0x00
>> hdr=0x01
>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>> device = 'RD790 PCI to PCI bridge (PCIe gpp port D)'
>> class = bridge
>> subclass = PCI-PCI
>> pcib6 at pci0:0:11:0: class=0x060400 card=0x59561002 chip=0x59801002
>> rev=0x00
>> hdr=0x01
>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>> device = 'RD790 PCI to PCI bridge (external gfx1 port A)'
>> class = bridge
>> subclass = PCI-PCI
>> atapci4 at pci0:0:18:0: class=0x01018f card=0x81ef1043 chip=0x43801002
>> rev=0x00
>> hdr=0x00
>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>> device = 'IXP SB600 Serial ATA Controller'
>> class = mass storage
>> subclass = ATA
>> ohci0 at pci0:0:19:0: class=0x0c0310 card=0x82881043 chip=0x43871002
>> rev=0x00
>> hdr=0x00
>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>> device = 'IXP SB600 USB Controller (OHCI0)'
>> class = serial bus
>> subclass = USB
>> ohci1 at pci0:0:19:1: class=0x0c0310 card=0x82881043 chip=0x43881002
>> rev=0x00
>> hdr=0x00
>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>> device = 'IXP SB600 USB Controller (OHCI1)'
>> class = serial bus
>> subclass = USB
>> ohci2 at pci0:0:19:2: class=0x0c0310 card=0x82881043 chip=0x43891002
>> rev=0x00
>> hdr=0x00
>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>> device = 'IXP SB600 USB Controller (OHCI2)'
>> class = serial bus
>> subclass = USB
>> ohci3 at pci0:0:19:3: class=0x0c0310 card=0x82881043 chip=0x438a1002
>> rev=0x00
>> hdr=0x00
>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>> device = 'IXP SB600 USB Controller (OHCI3)'
>> class = serial bus
>> subclass = USB
>> ohci4 at pci0:0:19:4: class=0x0c0310 card=0x82881043 chip=0x438b1002
>> rev=0x00
>> hdr=0x00
>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>> device = 'IXP SB600 USB Controller (OHCI4)'
>> class = serial bus
>> subclass = USB
>> ehci0 at pci0:0:19:5: class=0x0c0320 card=0x82881043 chip=0x43861002
>> rev=0x00
>> hdr=0x00
>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>> device = 'IXP SB600 USB Controller (EHCI)'
>> class = serial bus
>> subclass = USB
>> none0 at pci0:0:20:0: class=0x0c0500 card=0x82881043 chip=0x43851002
>> rev=0x14
>> hdr=0x00
>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>> device = 'ATI SMBus (ATI RD600/RS600)'
>> class = serial bus
>> subclass = SMBus
>> atapci5 at pci0:0:20:1: class=0x01018a card=0x82881043 chip=0x438c1002
>> rev=0x00
>> hdr=0x00
>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>> device = 'ATI RD600/RS600 IDE Controller (RD600/RS600)'
>> class = mass storage
>> subclass = ATA
>> none1 at pci0:0:20:2: class=0x040300 card=0x82881043 chip=0x43831002
>> rev=0x00
>> hdr=0x00
>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>> device = 'IXP SB600 High Definition Audio Controller'
>> class = multimedia
>> subclass = HDA
>> isab0 at pci0:0:20:3: class=0x060100 card=0x82881043 chip=0x438d1002
>> rev=0x00
>> hdr=0x00
>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>> device = 'IXP SB600 PCI to LPC Bridge'
>> class = bridge
>> subclass = PCI-ISA
>> pcib7 at pci0:0:20:4: class=0x060401 card=0x00000000 chip=0x43841002
>> rev=0x00
>> hdr=0x01
>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>> device = 'IXP SB600 PCI to PCI Bridge'
>> class = bridge
>> subclass = PCI-PCI
>> hostb1 at pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x12001022
>> rev=0x00
>> hdr=0x00
>> vendor = 'Advanced Micro Devices (AMD)'
>> device = '(Family 10h) Athlon64/Opteron/Sempron HyperTransport
>> Technology Configuration'
>> class = bridge
>> subclass = HOST-PCI
>> hostb2 at pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x12011022
>> rev=0x00
>> hdr=0x00
>> vendor = 'Advanced Micro Devices (AMD)'
>> device = '(Family 10h) Athlon64/Opteron/Sempron Address Map'
>> class = bridge
>> subclass = HOST-PCI
>> hostb3 at pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x12021022
>> rev=0x00
>> hdr=0x00
>> vendor = 'Advanced Micro Devices (AMD)'
>> device = '(Family 10h) Athlon64/Opteron/Sempron DRAM Controller'
>> class = bridge
>> subclass = HOST-PCI
>> hostb4 at pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x12031022
>> rev=0x00
>> hdr=0x00
>> vendor = 'Advanced Micro Devices (AMD)'
>> device = '(Family 10h) Athlon64/Opteron/Sempron Miscellaneous
>> Control'
>> class = bridge
>> subclass = HOST-PCI
>> hostb5 at pci0:0:24:4: class=0x060000 card=0x00000000 chip=0x12041022
>> rev=0x00
>> hdr=0x00
>> vendor = 'Advanced Micro Devices (AMD)'
>> device = '(Family 10h) Athlon64/Opteron/Sempron Link Control'
>> class = bridge
>> subclass = HOST-PCI
>> mpt0 at pci0:1:0:0: class=0x010000 card=0xa58015d9 chip=0x00581000 rev=0x08
>> hdr=0x00
>> vendor = 'LSI Logic (Was: Symbios Logic, NCR)'
>> device = 'SAS 3000 series, 8-port with 1068E -StorPort'
>> class = mass storage
>> subclass = SCSI
>> mpt1 at pci0:2:0:0: class=0x010000 card=0xa58015d9 chip=0x00581000 rev=0x08
>> hdr=0x00
>> vendor = 'LSI Logic (Was: Symbios Logic, NCR)'
>> device = 'SAS 3000 series, 8-port with 1068E -StorPort'
>> class = mass storage
>> subclass = SCSI
>> atapci0 at pci0:3:0:0: class=0x01018f card=0x612111ab chip=0x612111ab
>> rev=0xb1
>> hdr=0x00
>> vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
>> device = '6121 SATA2 Controller'
>> class = mass storage
>> subclass = ATA
>> mskc0 at pci0:4:0:0: class=0x020000 card=0x81f81043 chip=0x436411ab rev=0x12
>> hdr=0x00
>> vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
>> device = 'Yukon PCI-E Gigabit Ethernet Controller (88E8056)'
>> class = network
>> subclass = ethernet
>> atapci2 at pci0:5:0:0: class=0x01018f card=0x612111ab chip=0x612111ab
>> rev=0xb2
>> hdr=0x00
>> vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
>> device = '6121 SATA2 Controller'
>> class = mass storage
>> subclass = ATA
>> mpt2 at pci0:6:0:0: class=0x010000 card=0x30a01000 chip=0x00581000 rev=0x08
>> hdr=0x00
>> vendor = 'LSI Logic (Was: Symbios Logic, NCR)'
>> device = 'SAS 3000 series, 8-port with 1068E -StorPort'
>> class = mass storage
>> subclass = SCSI
>> em0 at pci0:7:5:0: class=0x020000 card=0x13768086 chip=0x107c8086 rev=0x05
>> hdr=0x00
>> vendor = 'Intel Corporation'
>> device = 'Gigabit Ethernet Controller (Copper) rev 5 (82541PI)'
>> class = network
>> subclass = ethernet
>> vgapci0 at pci0:7:6:0: class=0x030000 card=0x00000000 chip=0x88115333
>> rev=0x44
>> hdr=0x00
>> vendor = 'S3 Graphics Co., Ltd'
>> device = '86C732 Trio32, 86C764 Trio64, 86C765 Trio64V+ Rev 01'
>> class = display
>> subclass = VGA
>> none2 at pci0:7:8:0: class=0x0c0010 card=0x82941043 chip=0x581111c1 rev=0x70
>> hdr=0x00
>> vendor = 'Lucent/Agere Systems (Was: AT&T MicroElectronics)'
>> device = '1394A PCI PHY/Link Open Host Ctrlr I/F (FW322)'
>> class = serial bus
>> subclass = FireWire
>> [josh at foghornleghorn /var/log]$ sudo su -
>> foghornleghorn# pciconf -lvcb
>> hostb0 at pci0:0:0:0: class=0x060000 card=0x59561002 chip=0x59561002
>> rev=0x00
>> hdr=0x00
>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>> device = 'RD790 GFX Dual Slot'
>> class = bridge
>> subclass = HOST-PCI
>> cap 08[c4] = HT slave
>> cap 08[40] = HT retry mode
>> cap 08[54] = HT unit ID clumping
>> cap 08[9c] = HT unknown d03c
>> pcib1 at pci0:0:2:0: class=0x060400 card=0x59561002 chip=0x59781002 rev=0x00
>> hdr=0x01
>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>> device = 'RD790 PCI to PCI bridge (external gfx0 port A)'
>> class = bridge
>> subclass = PCI-PCI
>> cap 01[50] = powerspec 3 supports D0 D3 current D0
>> cap 10[58] = PCI-Express 2 root port max data 128(128) link x4(x8)
>> cap 05[a0] = MSI supports 1 message
>> cap 0d[b0] = PCI Bridge card=0x59561002
>> cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
>> ecap 000b[100] = unknown 1
>> ecap 0002[110] = VC 1 max VC0
>> pcib2 at pci0:0:3:0: class=0x060400 card=0x59561002 chip=0x59791002 rev=0x00
>> hdr=0x01
>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>> device = 'RD790 PCI to PCI bridge (external gfx0 port B)'
>> class = bridge
>> subclass = PCI-PCI
>> cap 01[50] = powerspec 3 supports D0 D3 current D0
>> cap 10[58] = PCI-Express 2 root port max data 128(128) link x4(x8)
>> cap 05[a0] = MSI supports 1 message
>> cap 0d[b0] = PCI Bridge card=0x59561002
>> cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
>> ecap 000b[100] = unknown 1
>> ecap 0002[110] = VC 1 max VC0
>> pcib3 at pci0:0:4:0: class=0x060400 card=0x59561002 chip=0x597a1002 rev=0x00
>> hdr=0x01
>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>> device = 'RD790 PCI to PCI bridge (PCIe gpp port A)'
>> class = bridge
>> subclass = PCI-PCI
>> cap 01[50] = powerspec 3 supports D0 D3 current D0
>> cap 10[58] = PCI-Express 2 root port max data 128(128) link x1(x2)
>> cap 05[a0] = MSI supports 1 message
>> cap 0d[b0] = PCI Bridge card=0x59561002
>> cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
>> ecap 000b[100] = unknown 1
>> ecap 0002[110] = VC 1 max VC0
>> pcib4 at pci0:0:6:0: class=0x060400 card=0x59561002 chip=0x597c1002 rev=0x00
>> hdr=0x01
>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>> device = 'RD790 PCI to PCI bridge (PCIe gpp port C)'
>> class = bridge
>> subclass = PCI-PCI
>> cap 01[50] = powerspec 3 supports D0 D3 current D0
>> cap 10[58] = PCI-Express 2 root port max data 128(128) link x1(x1)
>> cap 05[a0] = MSI supports 1 message
>> cap 0d[b0] = PCI Bridge card=0x59561002
>> cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
>> ecap 000b[100] = unknown 1
>> ecap 0002[110] = VC 1 max VC0
>> pcib5 at pci0:0:7:0: class=0x060400 card=0x59561002 chip=0x597d1002 rev=0x00
>> hdr=0x01
>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>> device = 'RD790 PCI to PCI bridge (PCIe gpp port D)'
>> class = bridge
>> subclass = PCI-PCI
>> cap 01[50] = powerspec 3 supports D0 D3 current D0
>> cap 10[58] = PCI-Express 2 root port max data 128(128) link x1(x1)
>> cap 05[a0] = MSI supports 1 message
>> cap 0d[b0] = PCI Bridge card=0x59561002
>> cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
>> ecap 000b[100] = unknown 1
>> ecap 0002[110] = VC 1 max VC0
>> pcib6 at pci0:0:11:0: class=0x060400 card=0x59561002 chip=0x59801002
>> rev=0x00
>> hdr=0x01
>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>> device = 'RD790 PCI to PCI bridge (external gfx1 port A)'
>> class = bridge
>> subclass = PCI-PCI
>> cap 01[50] = powerspec 3 supports D0 D3 current D0
>> cap 10[58] = PCI-Express 2 root port max data 128(128) link x4(x8)
>> cap 05[a0] = MSI supports 1 message
>> cap 0d[b0] = PCI Bridge card=0x59561002
>> cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
>> ecap 000b[100] = unknown 1
>> ecap 0002[110] = VC 1 max VC0
>> atapci4 at pci0:0:18:0: class=0x01018f card=0x81ef1043 chip=0x43801002
>> rev=0x00
>> hdr=0x00
>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>> device = 'IXP SB600 Serial ATA Controller'
>> class = mass storage
>> subclass = ATA
>> bar [10] = type I/O Port, range 32, base 0x5000, size 8, enabled
>> bar [14] = type I/O Port, range 32, base 0x4000, size 4, enabled
>> bar [18] = type I/O Port, range 32, base 0x3000, size 8, enabled
>> bar [1c] = type I/O Port, range 32, base 0x2000, size 4, enabled
>> bar [20] = type I/O Port, range 32, base 0x1000, size 16, enabled
>> bar [24] = type Memory, range 32, base 0xf71ff800, size 1024, enabled
>> cap 01[60] = powerspec 2 supports D0 D3 current D0
>> ohci0 at pci0:0:19:0: class=0x0c0310 card=0x82881043 chip=0x43871002
>> rev=0x00
>> hdr=0x00
>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>> device = 'IXP SB600 USB Controller (OHCI0)'
>> class = serial bus
>> subclass = USB
>> bar [10] = type Memory, range 32, base 0xf71fe000, size 4096, enabled
>> ohci1 at pci0:0:19:1: class=0x0c0310 card=0x82881043 chip=0x43881002
>> rev=0x00
>> hdr=0x00
>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>> device = 'IXP SB600 USB Controller (OHCI1)'
>> class = serial bus
>> subclass = USB
>> bar [10] = type Memory, range 32, base 0xf71fd000, size 4096, enabled
>> ohci2 at pci0:0:19:2: class=0x0c0310 card=0x82881043 chip=0x43891002
>> rev=0x00
>> hdr=0x00
>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>> device = 'IXP SB600 USB Controller (OHCI2)'
>> class = serial bus
>> subclass = USB
>> bar [10] = type Memory, range 32, base 0xf71fc000, size 4096, enabled
>> ohci3 at pci0:0:19:3: class=0x0c0310 card=0x82881043 chip=0x438a1002
>> rev=0x00
>> hdr=0x00
>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>> device = 'IXP SB600 USB Controller (OHCI3)'
>> class = serial bus
>> subclass = USB
>> bar [10] = type Memory, range 32, base 0xf71fb000, size 4096, enabled
>> ohci4 at pci0:0:19:4: class=0x0c0310 card=0x82881043 chip=0x438b1002
>> rev=0x00
>> hdr=0x00
>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>> device = 'IXP SB600 USB Controller (OHCI4)'
>> class = serial bus
>> subclass = USB
>> bar [10] = type Memory, range 32, base 0xf71fa000, size 4096, enabled
>> ehci0 at pci0:0:19:5: class=0x0c0320 card=0x82881043 chip=0x43861002
>> rev=0x00
>> hdr=0x00
>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>> device = 'IXP SB600 USB Controller (EHCI)'
>> class = serial bus
>> subclass = USB
>> bar [10] = type Memory, range 32, base 0xf71ff000, size 256, enabled
>> cap 01[c0] = powerspec 2 supports D0 D1 D2 D3 current D0
>> cap 05[d0] = MSI supports 1 message
>> cap 0a[e4] = EHCI Debug Port at offset 0xe0 in map 0x14
>> none0 at pci0:0:20:0: class=0x0c0500 card=0x82881043 chip=0x43851002
>> rev=0x14
>> hdr=0x00
>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>> device = 'ATI SMBus (ATI RD600/RS600)'
>> class = serial bus
>> subclass = SMBus
>> bar [10] = type I/O Port, range 32, base 0xb00, size 16, enabled
>> cap 08[b0] = HT MSI fixed address window disabled at 0xfee00000
>> atapci5 at pci0:0:20:1: class=0x01018a card=0x82881043 chip=0x438c1002
>> rev=0x00
>> hdr=0x00
>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>> device = 'ATI RD600/RS600 IDE Controller (RD600/RS600)'
>> class = mass storage
>> subclass = ATA
>> bar [10] = type I/O Port, range 32, base 0x1f0, size 8, enabled
>> bar [14] = type I/O Port, range 32, base 0x3f4, size 1, enabled
>> bar [18] = type I/O Port, range 32, base 0x170, size 8, enabled
>> bar [1c] = type I/O Port, range 32, base 0x374, size 1, enabled
>> bar [20] = type I/O Port, range 32, base 0xff00, size 16, enabled
>> none1 at pci0:0:20:2: class=0x040300 card=0x82881043 chip=0x43831002
>> rev=0x00
>> hdr=0x00
>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>> device = 'IXP SB600 High Definition Audio Controller'
>> class = multimedia
>> subclass = HDA
>> bar [10] = type Memory, range 64, base 0xf71f4000, size 16384,
>> enabled
>> cap 01[50] = powerspec 2 supports D0 D3 current D0
>> isab0 at pci0:0:20:3: class=0x060100 card=0x82881043 chip=0x438d1002
>> rev=0x00
>> hdr=0x00
>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>> device = 'IXP SB600 PCI to LPC Bridge'
>> class = bridge
>> subclass = PCI-ISA
>> pcib7 at pci0:0:20:4: class=0x060401 card=0x00000000 chip=0x43841002
>> rev=0x00
>> hdr=0x01
>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>> device = 'IXP SB600 PCI to PCI Bridge'
>> class = bridge
>> subclass = PCI-PCI
>> hostb1 at pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x12001022
>> rev=0x00
>> hdr=0x00
>> vendor = 'Advanced Micro Devices (AMD)'
>> device = '(Family 10h) Athlon64/Opteron/Sempron HyperTransport
>> Technology Configuration'
>> class = bridge
>> subclass = HOST-PCI
>> cap 08[80] = HT host
>> hostb2 at pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x12011022
>> rev=0x00
>> hdr=0x00
>> vendor = 'Advanced Micro Devices (AMD)'
>> device = '(Family 10h) Athlon64/Opteron/Sempron Address Map'
>> class = bridge
>> subclass = HOST-PCI
>> hostb3 at pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x12021022
>> rev=0x00
>> hdr=0x00
>> vendor = 'Advanced Micro Devices (AMD)'
>> device = '(Family 10h) Athlon64/Opteron/Sempron DRAM Controller'
>> class = bridge
>> subclass = HOST-PCI
>> hostb4 at pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x12031022
>> rev=0x00
>> hdr=0x00
>> vendor = 'Advanced Micro Devices (AMD)'
>> device = '(Family 10h) Athlon64/Opteron/Sempron Miscellaneous
>> Control'
>> class = bridge
>> subclass = HOST-PCI
>> cap 0f[f0] = unknown
>> hostb5 at pci0:0:24:4: class=0x060000 card=0x00000000 chip=0x12041022
>> rev=0x00
>> hdr=0x00
>> vendor = 'Advanced Micro Devices (AMD)'
>> device = '(Family 10h) Athlon64/Opteron/Sempron Link Control'
>> class = bridge
>> subclass = HOST-PCI
>> mpt0 at pci0:1:0:0: class=0x010000 card=0xa58015d9 chip=0x00581000 rev=0x08
>> hdr=0x00
>> vendor = 'LSI Logic (Was: Symbios Logic, NCR)'
>> device = 'SAS 3000 series, 8-port with 1068E -StorPort'
>> class = mass storage
>> subclass = SCSI
>> bar [10] = type I/O Port, range 32, base 0x6000, size 256, disabled
>> bar [14] = type Memory, range 64, base 0xf75fc000, size 16384,
>> enabled
>> bar [1c] = type Memory, range 64, base 0xf75e0000, size 65536,
>> enabled
>> cap 01[50] = powerspec 2 supports D0 D1 D2 D3 current D0
>> cap 10[68] = PCI-Express 1 endpoint max data 128(4096) link x4(x8)
>> cap 05[98] = MSI supports 1 message, 64 bit
>> cap 11[b0] = MSI-X supports 1 message in map 0x14
>> ecap 0001[100] = AER 1 1 fatal 1 non-fatal 0 corrected
>> mpt1 at pci0:2:0:0: class=0x010000 card=0xa58015d9 chip=0x00581000 rev=0x08
>> hdr=0x00
>> vendor = 'LSI Logic (Was: Symbios Logic, NCR)'
>> device = 'SAS 3000 series, 8-port with 1068E -StorPort'
>> class = mass storage
>> subclass = SCSI
>> bar [10] = type I/O Port, range 32, base 0x7000, size 256, disabled
>> bar [14] = type Memory, range 64, base 0xf78fc000, size 16384,
>> enabled
>> bar [1c] = type Memory, range 64, base 0xf78e0000, size 65536,
>> enabled
>> cap 01[50] = powerspec 2 supports D0 D1 D2 D3 current D0
>> cap 10[68] = PCI-Express 1 endpoint max data 128(4096) link x4(x8)
>> cap 05[98] = MSI supports 1 message, 64 bit
>> cap 11[b0] = MSI-X supports 1 message in map 0x14
>> ecap 0001[100] = AER 1 1 fatal 1 non-fatal 0 corrected
>> atapci0 at pci0:3:0:0: class=0x01018f card=0x612111ab chip=0x612111ab
>> rev=0xb1
>> hdr=0x00
>> vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
>> device = '6121 SATA2 Controller'
>> class = mass storage
>> subclass = ATA
>> bar [10] = type I/O Port, range 32, base 0x9800, size 8, enabled
>> bar [14] = type I/O Port, range 32, base 0x9400, size 4, enabled
>> bar [18] = type I/O Port, range 32, base 0x9000, size 8, enabled
>> bar [1c] = type I/O Port, range 32, base 0x8800, size 4, enabled
>> bar [20] = type I/O Port, range 32, base 0x8400, size 16, enabled
>> bar [24] = type Memory, range 32, base 0xf79ffc00, size 1024, enabled
>> cap 01[48] = powerspec 2 supports D0 D1 D3 current D0
>> cap 05[50] = MSI supports 1 message
>> cap 10[e0] = PCI-Express 1 legacy endpoint max data 128(128) link
>> x1(x1)
>> ecap 0001[100] = AER 1 0 fatal 0 non-fatal 2 corrected
>> mskc0 at pci0:4:0:0: class=0x020000 card=0x81f81043 chip=0x436411ab rev=0x12
>> hdr=0x00
>> vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
>> device = 'Yukon PCI-E Gigabit Ethernet Controller (88E8056)'
>> class = network
>> subclass = ethernet
>> bar [10] = type Memory, range 64, base 0xf7afc000, size 16384,
>> enabled
>> bar [18] = type I/O Port, range 32, base 0xa800, size 256, enabled
>> cap 01[48] = powerspec 3 supports D0 D1 D2 D3 current D0
>> cap 03[50] = VPD
>> cap 05[5c] = MSI supports 1 message, 64 bit enabled with 1 message
>> cap 10[e0] = PCI-Express 1 legacy endpoint max data 128(128) link
>> x1(x1)
>> ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected
>> atapci2 at pci0:5:0:0: class=0x01018f card=0x612111ab chip=0x612111ab
>> rev=0xb2
>> hdr=0x00
>> vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
>> device = '6121 SATA2 Controller'
>> class = mass storage
>> subclass = ATA
>> bar [10] = type I/O Port, range 32, base 0xc800, size 8, enabled
>> bar [14] = type I/O Port, range 32, base 0xc400, size 4, enabled
>> bar [18] = type I/O Port, range 32, base 0xc000, size 8, enabled
>> bar [1c] = type I/O Port, range 32, base 0xb800, size 4, enabled
>> bar [20] = type I/O Port, range 32, base 0xb400, size 16, enabled
>> bar [24] = type Memory, range 32, base 0xf7bffc00, size 1024, enabled
>> cap 01[48] = powerspec 2 supports D0 D1 D3 current D0
>> cap 05[50] = MSI supports 1 message
>> cap 10[e0] = PCI-Express 1 legacy endpoint max data 128(128) link
>> x1(x1)
>> ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected
>> mpt2 at pci0:6:0:0: class=0x010000 card=0x30a01000 chip=0x00581000 rev=0x08
>> hdr=0x00
>> vendor = 'LSI Logic (Was: Symbios Logic, NCR)'
>> device = 'SAS 3000 series, 8-port with 1068E -StorPort'
>> class = mass storage
>> subclass = SCSI
>> bar [10] = type I/O Port, range 32, base 0xd000, size 256, disabled
>> bar [14] = type Memory, range 64, base 0xf7ffc000, size 16384,
>> enabled
>> bar [1c] = type Memory, range 64, base 0xf7fe0000, size 65536,
>> enabled
>> cap 01[50] = powerspec 2 supports D0 D1 D2 D3 current D0
>> cap 10[68] = PCI-Express 1 endpoint max data 128(4096) link x4(x8)
>> cap 05[98] = MSI supports 1 message, 64 bit
>> cap 11[b0] = MSI-X supports 1 message in map 0x14
>> ecap 0001[100] = AER 1 1 fatal 1 non-fatal 0 corrected
>> em0 at pci0:7:5:0: class=0x020000 card=0x13768086 chip=0x107c8086 rev=0x05
>> hdr=0x00
>> vendor = 'Intel Corporation'
>> device = 'Gigabit Ethernet Controller (Copper) rev 5 (82541PI)'
>> class = network
>> subclass = ethernet
>> bar [10] = type Memory, range 32, base 0xfebe0000, size 131072,
>> enabled
>> bar [14] = type Memory, range 32, base 0xfebc0000, size 131072,
>> enabled
>> bar [18] = type I/O Port, range 32, base 0xe800, size 64, enabled
>> cap 01[dc] = powerspec 2 supports D0 D3 current D0
>> cap 07[e4] = PCI-X supports 2048 burst read, 1 split transaction
>> vgapci0 at pci0:7:6:0: class=0x030000 card=0x00000000 chip=0x88115333
>> rev=0x44
>> hdr=0x00
>> vendor = 'S3 Graphics Co., Ltd'
>> device = '86C732 Trio32, 86C764 Trio64, 86C765 Trio64V+ Rev 01'
>> class = display
>> subclass = VGA
>> bar [10] = type Memory, range 32, base 0xf8000000, size 67108864,
>> enabled
>> none2 at pci0:7:8:0: class=0x0c0010 card=0x82941043 chip=0x581111c1 rev=0x70
>> hdr=0x00
>> vendor = 'Lucent/Agere Systems (Was: AT&T MicroElectronics)'
>> device = '1394A PCI PHY/Link Open Host Ctrlr I/F (FW322)'
>> class = serial bus
>> subclass = FireWire
>> bar [10] = type Memory, range 32, base 0xfeb8f000, size 4096, enabled
>> cap 01[44] = powerspec 2 supports D0 D1 D2 D3 current D0
>>
>>
>>
>> > # vmstat -i
>> >
>>
>> interrupt total rate
>> irq9: acpi0 1 0
>> irq16: atapci0+ 2 0
>> irq17: ohci1 ohci3 3 0
>> irq18: mpt0 ohci2+ 7066718 31
>> irq19: mpt1 atapci* 7798877 34
>> irq20: em0 11715792 51
>> irq22: atapci4 628883 2
>> cpu0: timer 455853831 1999
>> irq256: mskc0 97098730 425
>> cpu1: timer 455845190 1999
>> Total 1036008027 4544
>>
>>
>>
>> > # sysctl -a | grep msi
>> >
>>
>> hw.pci.honor_msi_blacklist: 1
>> hw.pci.enable_msix: 1
>> hw.pci.enable_msi: 1
>>
>>
>>
>> > # dmesg
>> >
>>
>> Copyright (c) 1992-2011 The FreeBSD Project.
>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>> The Regents of the University of California. All rights reserved.
>> FreeBSD is a registered trademark of The FreeBSD Foundation.
>> FreeBSD 8.2-STABLE #17: Mon Jun 6 19:40:19 EDT 2011
>> root at foghornleghorn.res.openband.net:
>> /usr/obj/usr/src/sys/FOGHORNLEGHORN
>> amd64
>> Timecounter "i8254" frequency 1193182 Hz quality 0
>> CPU: AMD Phenom(tm) II X2 555 Processor (3209.77-MHz K8-class CPU)
>> Origin = "AuthenticAMD" Id = 0x100f43 Family = 10 Model = 4 Stepping
>> =
>> 3
>>
>>
>> Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
>> Features2=0x802009<SSE3,MON,CX16,POPCNT>
>> AMD
>>
>> Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
>> AMD
>>
>> Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT>
>> TSC: P-state invariant
>> real memory = 8589934592 (8192 MB)
>> avail memory = 8257736704 (7875 MB)
>> ACPI APIC Table: <092310 OEMAPIC >
>> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>> FreeBSD/SMP: 1 package(s) x 2 core(s)
>> cpu0 (BSP): APIC ID: 0
>> cpu1 (AP): APIC ID: 1
>> ioapic0 <Version 2.1> irqs 0-23 on motherboard
>> acpi0: <092310 OEMRSDT> on motherboard
>> acpi0: [ITHREAD]
>> acpi0: Power Button (fixed)
>> acpi0: reservation of fee00000, 1000 (3) failed
>> acpi0: reservation of ffb80000, 80000 (3) failed
>> acpi0: reservation of fff00000, 100000 (3) failed
>> acpi0: reservation of 0, a0000 (3) failed
>> acpi0: reservation of 100000, dff00000 (3) failed
>> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
>> acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
>> cpu0: <ACPI CPU> on acpi0
>> cpu1: <ACPI CPU> on acpi0
>> acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
>> acpi0
>> Timecounter "HPET" frequency 14318180 Hz quality 900
>> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>> pci0: <ACPI PCI bus> on pcib0
>> pcib1: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0
>> pci1: <ACPI PCI bus> on pcib1
>> mpt0: <LSILogic SAS/SATA Adapter> port 0x6000-0x60ff mem
>> 0xf75fc000-0xf75fffff,0xf75e0000-0xf75effff irq 18 at device 0.0 on pci1
>> mpt0: [ITHREAD]
>> mpt0: MPI Version=1.5.20.0
>> pcib2: <ACPI PCI-PCI bridge> irq 19 at device 3.0 on pci0
>> pci2: <ACPI PCI bus> on pcib2
>> mpt1: <LSILogic SAS/SATA Adapter> port 0x7000-0x70ff mem
>> 0xf78fc000-0xf78fffff,0xf78e0000-0xf78effff irq 19 at device 0.0 on pci2
>> mpt1: [ITHREAD]
>> mpt1: MPI Version=1.5.20.0
>> pcib3: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
>> pci3: <ACPI PCI bus> on pcib3
>> atapci0: <Marvell 88SX6121 UDMA133 controller> port
>> 0x9800-0x9807,0x9400-0x9403,0x9000-0x9007,0x8800-0x8803,0x8400-0x840f mem
>> 0xf79ffc00-0xf79fffff irq 16 at device 0.0 on pci3
>> atapci0: [ITHREAD]
>> atapci1: <AHCI SATA controller> on atapci0
>> atapci1: [ITHREAD]
>> atapci1: AHCI v1.00 controller with 3 3Gbps ports, PM supported
>> ata2: <ATA channel 0> on atapci1
>> ata2: [ITHREAD]
>> ata3: <ATA channel 1> on atapci1
>> ata3: [ITHREAD]
>> ata4: <ATA channel 0> on atapci0
>> ata4: [ITHREAD]
>> pcib4: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0
>> pci4: <ACPI PCI bus> on pcib4
>> mskc0: <Marvell Yukon 88E8056 Gigabit Ethernet> port 0xa800-0xa8ff mem
>> 0xf7afc000-0xf7afffff irq 18 at device 0.0 on pci4
>> msk0: <Marvell Technology Group Ltd. Yukon EC Ultra Id 0xb4 Rev 0x03> on
>> mskc0
>> msk0: Ethernet address: 00:1f:c6:e9:f8:7c
>> miibus0: <MII bus> on msk0
>> e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0
>> e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
>> 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
>> mskc0: [ITHREAD]
>> pcib5: <ACPI PCI-PCI bridge> irq 19 at device 7.0 on pci0
>> pci5: <ACPI PCI bus> on pcib5
>> atapci2: <Marvell 88SX6121 UDMA133 controller> port
>> 0xc800-0xc807,0xc400-0xc403,0xc000-0xc007,0xb800-0xb803,0xb400-0xb40f mem
>> 0xf7bffc00-0xf7bfffff irq 19 at device 0.0 on pci5
>> atapci2: [ITHREAD]
>> atapci3: <AHCI SATA controller> on atapci2
>> atapci3: [ITHREAD]
>> atapci3: AHCI v1.00 controller with 3 3Gbps ports, PM supported
>> ata5: <ATA channel 0> on atapci3
>> ata5: [ITHREAD]
>> ata6: <ATA channel 1> on atapci3
>> ata6: [ITHREAD]
>> ata7: <ATA channel 0> on atapci2
>> ata7: [ITHREAD]
>> pcib6: <ACPI PCI-PCI bridge> irq 19 at device 11.0 on pci0
>> pci6: <ACPI PCI bus> on pcib6
>> mpt2: <LSILogic SAS/SATA Adapter> port 0xd000-0xd0ff mem
>> 0xf7ffc000-0xf7ffffff,0xf7fe0000-0xf7feffff irq 19 at device 0.0 on pci6
>> mpt2: [ITHREAD]
>> mpt2: MPI Version=1.5.19.0
>> atapci4: <ATI IXP600 SATA300 controller> port
>> 0x5000-0x5007,0x4000-0x4003,0x3000-0x3007,0x2000-0x2003,0x1000-0x100f mem
>> 0xf71ff800-0xf71ffbff irq 22 at device 18.0 on pci0
>> atapci4: [ITHREAD]
>> atapci4: AHCI v1.10 controller with 4 3Gbps ports, PM supported
>> ata8: <ATA channel 0> on atapci4
>> ata8: port is not ready (timeout 0ms) tfd = 000001d0
>> ata8: software reset clear timeout
>> ata8: [ITHREAD]
>> ata9: <ATA channel 1> on atapci4
>> ata9: [ITHREAD]
>> ata10: <ATA channel 2> on atapci4
>> ata10: [ITHREAD]
>> ata11: <ATA channel 3> on atapci4
>> ata11: [ITHREAD]
>> ohci0: <OHCI (generic) USB controller> mem 0xf71fe000-0xf71fefff irq 16 at
>> device 19.0 on pci0
>> ohci0: [ITHREAD]
>> usbus0: <OHCI (generic) USB controller> on ohci0
>> ohci1: <OHCI (generic) USB controller> mem 0xf71fd000-0xf71fdfff irq 17 at
>> device 19.1 on pci0
>> ohci1: [ITHREAD]
>> usbus1: <OHCI (generic) USB controller> on ohci1
>> ohci2: <OHCI (generic) USB controller> mem 0xf71fc000-0xf71fcfff irq 18 at
>> device 19.2 on pci0
>> ohci2: [ITHREAD]
>> usbus2: <OHCI (generic) USB controller> on ohci2
>> ohci3: <OHCI (generic) USB controller> mem 0xf71fb000-0xf71fbfff irq 17 at
>> device 19.3 on pci0
>> ohci3: [ITHREAD]
>> usbus3: <OHCI (generic) USB controller> on ohci3
>> ohci4: <OHCI (generic) USB controller> mem 0xf71fa000-0xf71fafff irq 18 at
>> device 19.4 on pci0
>> ohci4: [ITHREAD]
>> usbus4: <OHCI (generic) USB controller> on ohci4
>> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf71ff000-0xf71ff0ff irq
>> 19
>> at device 19.5 on pci0
>> ehci0: [ITHREAD]
>> ehci0: AMD SB600/700 quirk applied
>> usbus5: EHCI version 1.0
>> usbus5: <EHCI (generic) USB 2.0 controller> on ehci0
>> pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
>> atapci5: <ATI IXP600 UDMA133 controller> port
>> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
>> ata0: <ATA channel 0> on atapci5
>> ata0: [ITHREAD]
>> pci0: <multimedia, HDA> at device 20.2 (no driver attached)
>> isab0: <PCI-ISA bridge> at device 20.3 on pci0
>> isa0: <ISA bus> on isab0
>> pcib7: <ACPI PCI-PCI bridge> at device 20.4 on pci0
>> pci7: <ACPI PCI bus> on pcib7
>> em0: <Intel(R) PRO/1000 Legacy Network Connection 1.0.3> port
>> 0xe800-0xe83f
>> mem 0xfebe0000-0xfebfffff,0xfebc0000-0xfebdffff irq 20 at device 5.0 on
>> pci7
>> em0: [FILTER]
>> em0: Ethernet address: 00:1b:21:4e:e5:2e
>> vgapci0: <VGA-compatible display> mem 0xf8000000-0xfbffffff at device 6.0
>> on
>> pci7
>> pci7: <serial bus, FireWire> at device 8.0 (no driver attached)
>> acpi_button0: <Power Button> on acpi0
>> atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
>> acpi_hpet1: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
>> acpi0
>> device_attach: acpi_hpet1 attach returned 12
>> uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
>> uart0: [FILTER]
>> orm0: <ISA Option ROMs> at iomem
>> 0xc0000-0xc7fff,0xc8000-0xc87ff,0xc8800-0xc97ff on isa0
>> sc0: <System console> at flags 0x100 on isa0
>> sc0: VGA <16 virtual consoles, flags=0x300>
>> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>> acpi_throttle0: <ACPI CPU Throttling> on cpu0
>> acpi_throttle0: CLK_VAL field overlaps THT_EN bit
>> device_attach: acpi_throttle0 attach returned 6
>> hwpstate0: <Cool`n'Quiet 2.0> on cpu0
>> Timecounters tick every 1.000 msec
>> usbus0: 12Mbps Full Speed USB v1.0
>> usbus1: 12Mbps Full Speed USB v1.0
>> usbus2: 12Mbps Full Speed USB v1.0
>> usbus3: 12Mbps Full Speed USB v1.0
>> usbus4: 12Mbps Full Speed USB v1.0
>> usbus5: 480Mbps High Speed USB v2.0
>> ugen0.1: <ATI> at usbus0
>> uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
>> ugen1.1: <ATI> at usbus1
>> uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
>> ugen2.1: <ATI> at usbus2
>> uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
>> ugen3.1: <ATI> at usbus3
>> uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
>> ugen4.1: <ATI> at usbus4
>> uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
>> ugen5.1: <ATI> at usbus5
>> uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
>> ad16: 476940MB <Seagate ST3500641NS 3.AEP> at ata8-master UDMA100 SATA
>> 3Gb/s
>> uhub0: 2 ports with 2 removable, self powered
>> uhub1: 2 ports with 2 removable, self powered
>> uhub2: 2 ports with 2 removable, self powered
>> uhub3: 2 ports with 2 removable, self powered
>> uhub4: 2 ports with 2 removable, self powered
>> da8 at mpt0 bus 0 scbus0 target 0 lun 0
>> da8: <ATA ST31000528AS CC38> Fixed Direct Access SCSI-5 device
>> da8: 300.000MB/s transfers
>> da8: Command Queueing enabled
>> da8: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
>> da9 at mpt0 bus 0 scbus0 target 1 lun 0
>> da9: <ATA Hitachi HDS72101 A39C> Fixed Direct Access SCSI-5 device
>> da9: 300.000MB/s transfers
>> da9: Command Queueing enabled
>> da9: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
>> da10 at mpt0 bus 0 scbus0 target 2 lun 0
>> da10: <ATA SAMSUNG HD103SJ 00E4> Fixed Direct Access SCSI-5 device
>> da10: 300.000MB/s transfers
>> da10: Command Queueing enabled
>> da10: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
>> da11 at mpt0 bus 0 scbus0 target 3 lun 0
>> da11: <ATA SAMSUNG HD103SJ 00E4> Fixed Direct Access SCSI-5 device
>> da11: 300.000MB/s transfers
>> da11: Command Queueing enabled
>> da11: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
>> da12 at mpt0 bus 0 scbus0 target 4 lun 0
>> da12: <ATA SAMSUNG HD103SI 1118> Fixed Direct Access SCSI-5 device
>> da12: 300.000MB/s transfers
>> da12: Command Queueing enabled
>> da12: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
>> da13 at mpt0 bus 0 scbus0 target 5 lun 0
>> da13: <ATA SAMSUNG HD103SI 1118> Fixed Direct Access SCSI-5 device
>> da13: 300.000MB/s transfers
>> da13: Command Queueing enabled
>> da13: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
>> da14 at mpt0 bus 0 scbus0 target 6 lun 0
>> da14: <ATA Hitachi HDS72101 A39C> Fixed Direct Access SCSI-5 device
>> da14: 300.000MB/s transfers
>> da14: Command Queueing enabled
>> da14: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
>> da0 at mpt1 bus 0 scbus1 target 0 lun 0
>> da0: <ATA Hitachi HDS5C302 A580> Fixed Direct Access SCSI-5 device
>> da0: 300.000MB/s transfers
>> da0: Command Queueing enabled
>> da0: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
>> da1 at mpt1 bus 0 scbus1 target 1 lun 0
>> da1: <ATA Hitachi HDS5C302 A580> Fixed Direct Access SCSI-5 device
>> da1: 300.000MB/s transfers
>> da1: Command Queueing enabled
>> da1: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
>> da2 at mpt1 bus 0 scbus1 target 2 lun 0
>> da2: <ATA Hitachi HDS5C302 A580> Fixed Direct Access SCSI-5 device
>> da2: 300.000MB/s transfers
>> da2: Command Queueing enabled
>> da2: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
>> da3 at mpt1 bus 0 scbus1 target 3 lun 0
>> da3: <ATA Hitachi HDS5C302 A580> Fixed Direct Access SCSI-5 device
>> da3: 300.000MB/s transfers
>> da3: Command Queueing enabled
>> da3: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
>> da4 at mpt1 bus 0 scbus1 target 4 lun 0
>> da4: <ATA Hitachi HDS5C302 A580> Fixed Direct Access SCSI-5 device
>> da4: 300.000MB/s transfers
>> da4: Command Queueing enabled
>> da4: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
>> da5 at mpt1 bus 0 scbus1 target 5 lun 0
>> da5: <ATA SAMSUNG HD103SI 1118> Fixed Direct Access SCSI-5 device
>> da5: 300.000MB/s transfers
>> da5: Command Queueing enabled
>> da5: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
>> da6 at mpt1 bus 0 scbus1 target 6 lun 0
>> da6: <ATA ST31000340AS SD04> Fixed Direct Access SCSI-5 device
>> da6: 300.000MB/s transfers
>> da6: Command Queueing enabled
>> da6: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
>> da7 at mpt1 bus 0 scbus1 target 7 lun 0
>> da7: <ATA SAMSUNG HD103SI 1118> Fixed Direct Access SCSI-5 device
>> da7: 300.000MB/s transfers
>> da7: Command Queueing enabled
>> da7: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
>> SMP: AP CPU #1 Launched!
>> uhub5: 10 ports with 10 removable, self powered
>> GEOM: da7: geometry does not match label (16h,63s != 255h,63s).
>> Trying to mount root from ufs:/dev/ad16s1a
>> WARNING: / was not properly dismounted
>> ZFS filesystem version 5
>> ZFS storage pool version 28
>> WARNING: /tmp was not properly dismounted
>> WARNING: /usr was not properly dismounted
>> WARNING: /var was not properly dismounted
>> 0
>> mpt1: request 0xffffff80002c57f0:2369 timed out for ccb 0xffffff00063bb000
>> (req->ccb 0xffffff00063bb000)
>> mpt1: attempting to abort req 0xffffff80002c57f0:2369 function 0
>> mpt1: mpt_wait_req(1) timed out
>> mpt1: mpt_recover_commands: abort timed-out. Resetting controller
>> mpt1: mpt_cam_event: 0x80
>> mpt1: mpt_cam_event: 0x80
>> mpt1: completing timedout/aborted req 0xffffff80002c57f0:2369
>> mpt1: mpt_cam_event: 0x16
>> mpt1: mpt_cam_event: 0x12
>> mpt1: mpt_cam_event: 0x12
>> mpt1: mpt_cam_event: 0x12
>> mpt1: mpt_cam_event: 0x12
>> mpt1: mpt_cam_event: 0x12
>> mpt1: mpt_cam_event: 0x12
>> mpt1: mpt_cam_event: 0x12
>> mpt1: mpt_cam_event: 0x12
>> mpt1: mpt_cam_event: 0x16
>> mpt1: request 0xffffff80002c5c70:2375 timed out for ccb 0xffffff00063bb000
>> (req->ccb 0xffffff00063bb000)
>> mpt1: attempting to abort req 0xffffff80002c5c70:2375 function 0
>> mpt1: completing timedout/aborted req 0xffffff80002c5c70:2375
>> mpt1:
>> abort of req 0xffffff80002c5c70:0 completed
>> mpt1: mpt_cam_event: 0x16
>> mpt1: mpt_cam_event: 0x16
>> mpt1: request 0xffffff80002c5fd0:2379 timed out for ccb 0xffffff00063bb000
>> (req->ccb 0xffffff00063bb000)
>> mpt1: attempting to abort req 0xffffff80002c5fd0:2379 function 0
>> mpt1: completing timedout/aborted req 0xffffff80002c5fd0:2379
>> mpt1:
>> abort of req 0xffffff80002c5fd0:0 completed
>> mpt1: mpt_cam_event: 0x16
>> mpt1: mpt_cam_event: 0x16
>> mpt1: request 0xffffff80002c6210:2383 timed out for ccb 0xffffff00063bb000
>> (req->ccb 0xffffff00063bb000)
>> mpt1: attempting to abort req 0xffffff80002c6210:2383 function 0
>> mpt1: completing timedout/aborted req 0xffffff80002c6210:2383
>> mpt1:
>> abort of req 0xffffff80002c6210:0 completed
>> mpt1: mpt_cam_event: 0x16
>> mpt1: mpt_cam_event: 0x16
>> mpt1: request 0xffffff80002c6180:2387 timed out for ccb 0xffffff00063bb000
>> (req->ccb 0xffffff00063bb000)
>> mpt1: attempting to abort req 0xffffff80002c6180:2387 function 0
>> mpt1: completing timedout/aborted req 0xffffff80002c6180:2387
>> mpt1:
>> abort of req 0xffffff80002c6180:0 completed
>> mpt1: mpt_cam_event: 0x16
>> mpt1: mpt_cam_event: 0x16
>> mpt1: request 0xffffff80002c62a0:2391 timed out for ccb 0xffffff00063bb000
>> (req->ccb 0xffffff00063bb000)
>> mpt1: attempting to abort req 0xffffff80002c62a0:2391 function 0
>> mpt1: completing timedout/aborted req 0xffffff80002c62a0:2391
>> mpt1:
>> abort of req 0xffffff80002c62a0:0 completed
>> mpt1: mpt_cam_event: 0x16
>> mpt1: mpt_cam_event: 0x16
>> mpt1: request 0xffffff80002c6720:2395 timed out for ccb 0xffffff00063bb000
>> (req->ccb 0xffffff00063bb000)
>> mpt1: attempting to abort req 0xffffff80002c6720:2395 function 0
>> mpt1: completing timedout/aborted req 0xffffff80002c6720:2395
>> mpt1:
>> abort of req 0xffffff80002c6720:0 completed
>> mpt1: mpt_cam_event: 0x16
>> mpt1: mpt_cam_event: 0x16
>> mpt1: request 0xffffff80002c67b0:2399 timed out for ccb 0xffffff00063bb000
>> (req->ccb 0xffffff00063bb000)
>> mpt1: attempting to abort req 0xffffff80002c67b0:2399 function 0
>> mpt1: completing timedout/aborted req 0xffffff80002c67b0:2399
>> mpt1:
>> abort of req 0xffffff80002c67b0:0 completed
>> mpt1: mpt_cam_event: 0x16
>> mpt1: mpt_cam_event: 0x16
>> mpt0: request 0xffffff80002a69e0:2082 timed out for ccb 0xffffff0006389800
>> (req->ccb 0xffffff0006389800)
>> mpt0: attempting to abort req 0xffffff80002a69e0:2082 function 0
>> mpt0: completing timedout/aborted req 0xffffff80002a69e0:2082
>> mpt0: abort of req 0xffffff80002a69e0:0 completed
>> mpt0: mpt_cam_event: 0x16
>> mpt0: mpt_cam_event: 0x16
>> mpt0: request 0xffffff80002a6c20:2086 timed out for ccb 0xffffff0006389800
>> (req->ccb 0xffffff0006389800)
>> mpt0: attempting to abort req 0xffffff80002a6c20:2086 function 0
>> mpt0: completing timedout/aborted req 0xffffff80002a6c20:2086
>> mpt0: abort of req 0xffffff80002a6c20:0 completed
>> mpt0: mpt_cam_event: 0x16
>> mpt0: mpt_cam_event: 0x16
>> mpt0: request 0xffffff80002a6cb0:2090 timed out for ccb 0xffffff0006389800
>> (req->ccb 0xffffff0006389800)
>> mpt0: attempting to abort req 0xffffff80002a6cb0:2090 function 0
>> mpt0: completing timedout/aborted req 0xffffff80002a6cb0:2090
>> mpt0: abort of req 0xffffff80002a6cb0:0 completed
>> mpt0: mpt_cam_event: 0x16
>> mpt0: mpt_cam_event: 0x16
>> mpt0: request 0xffffff80002a6b90:2094 timed out for ccb 0xffffff0006389800
>> (req->ccb 0xffffff0006389800)
>> mpt0: attempting to abort req 0xffffff80002a6b90:2094 function 0
>> mpt0: completing timedout/aborted req 0xffffff80002a6b90:2094
>> mpt0: abort of req 0xffffff80002a6b90:0 completed
>> mpt0: mpt_cam_event: 0x16
>> mpt0: mpt_cam_event: 0x16
>> tun0: link state changed to UP
>> (da8:mpt0:0:0:0): READ(10). CDB: 28 0 3e e2 6f 56 0 0 1 0
>> (da8:mpt0:0:0:0): CAM status: SCSI Status Error
>> (da8:mpt0:0:0:0): SCSI status: Check Condition
>> (da8:mpt0:0:0:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or
>> bus device reset occurred)
>> (da11:mpt0:0:3:0): READ(10). CDB: 28 0 1a b6 92 0 0 0 80 0
>> (da11:mpt0:0:3:0): CAM status: SCSI Status Error
>> (da11:mpt0:0:3:0): SCSI status: Check Condition
>> (da11:mpt0:0:3:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset,
>> or
>> bus device reset occurred)
>> (da2:mpt1:0:2:0): READ(10). CDB: 28 0 76 7b de 0 0 0 80 0
>> (da2:mpt1:0:2:0): CAM status: SCSI Status Error
>> (da2:mpt1:0:2:0): SCSI status: Check Condition
>> (da2:mpt1:0:2:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or
>> bus device reset occurred)
>> (da10:mpt0:0:2:0): READ(10). CDB: 28 0 1a ff 67 80 0 0 80 0
>> (da10:mpt0:0:2:0): CAM status: SCSI Status Error
>> (da10:mpt0:0:2:0): SCSI status: Check Condition
>> (da10:mpt0:0:2:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset,
>> or
>> bus device reset occurred)
>> (da5:mpt1:0:5:0): READ(10). CDB: 28 0 1a ff 67 80 0 0 80 0
>> (da5:mpt1:0:5:0): CAM status: SCSI Status Error
>> (da5:mpt1:0:5:0): SCSI status: Check Condition
>> (da5:mpt1:0:5:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or
>> bus device reset occurred)
>> (da7:mpt1:0:7:0): READ(10). CDB: 28 0 40 d7 da 80 0 0 80 0
>> (da7:mpt1:0:7:0): CAM status: SCSI Status Error
>> (da7:mpt1:0:7:0): SCSI status: Check Condition
>> (da7:mpt1:0:7:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or
>> bus device reset occurred)
>> (da6:mpt1:0:6:0): READ(10). CDB: 28 0 40 d7 da 80 0 0 80 0
>> (da6:mpt1:0:6:0): CAM status: SCSI Status Error
>> (da6:mpt1:0:6:0): SCSI status: Check Condition
>> (da6:mpt1:0:6:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or
>> bus device reset occurred)
>> (da0:mpt1:0:0:0): READ(10). CDB: 28 0 76 91 87 e3 0 0 1 0
>> (da0:mpt1:0:0:0): CAM status: SCSI Status Error
>> (da0:mpt1:0:0:0): SCSI status: Check Condition
>> (da0:mpt1:0:0:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or
>> bus device reset occurred)
>> (da3:mpt1:0:3:0): READ(10). CDB: 28 0 76 69 1 1c 0 0 1 0
>> (da3:mpt1:0:3:0): CAM status: SCSI Status Error
>> (da3:mpt1:0:3:0): SCSI status: Check Condition
>> (da3:mpt1:0:3:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or
>> bus device reset occurred)
>> (da1:mpt1:0:1:0): READ(10). CDB: 28 0 76 69 1 1c 0 0 1 0
>> (da1:mpt1:0:1:0): CAM status: SCSI Status Error
>> (da1:mpt1:0:1:0): SCSI status: Check Condition
>> (da1:mpt1:0:1:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or
>> bus device reset occurred)
>> (da9:mpt0:0:1:0): READ(10). CDB: 28 0 1a b3 d7 0 0 0 80 0
>> (da9:mpt0:0:1:0): CAM status: SCSI Status Error
>> (da9:mpt0:0:1:0): SCSI status: Check Condition
>> (da9:mpt0:0:1:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or
>> bus device reset occurred)
>> (da4:mpt1:0:4:0): READ(10). CDB: 28 0 53 3c c6 0 0 0 80 0
>> (da4:mpt1:0:4:0): CAM status: SCSI Status Error
>> (da4:mpt1:0:4:0): SCSI status: Check Condition
>> (da4:mpt1:0:4:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or
>> bus device reset occurred)
>>
>>
>>
>> >
>> > --
>> > | Jeremy Chadwick jdc at parodius.com |
>> > | Parodius Networking http://www.parodius.com/ |
>> > | UNIX Systems Administrator Mountain View, CA, US |
>> > | Making life hard for others since 1977. PGP 4BD6C0CB |
>> >
>> >
>>
>>
>> --
>> Joshua Boyd
>> _______________________________________________
>> freebsd-stable at freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
>> To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"
>>
>
>
--
Joshua Boyd
More information about the freebsd-stable
mailing list