Keyboard repeat issues with Dell Optiplex 980s
korvus at comcast.net
Wed Jan 19 14:00:58 UTC 2011
On 1/18/2011 5:56 PM, Jeremy Chadwick wrote:
> On Tue, Jan 18, 2011 at 04:40:13PM -0500, Steve Polyack wrote:
>> We've recently upgraded a few desktop workstations from Dell
>> Optiplex 960s to Optiplex 980s. We were running FreeBSD
>> 8.1-RELEASE. The migration was performed by simply swapping the
>> drives into the new systems. Immediately after switching people
>> over, they all began to report bizarre keyboard issues - things like
>> infinite key repeats (letters, numbers, "enter") for keys they did
>> not hold down. The key repeats continue indefinitely until another
>> key is pressed. Occasionally, even mouse input will trigger similar
>> infinite keyboard input repetition. In addition to the repeat
>> issue, sometimes physical key-presses are not registered by FreeBSD,
>> leading to typos and angry developers.
>> We've tried doing fresh installs of FreeBSD 8.2-RC2 on two of these
>> systems, and the issue persists. Because of the observed behavior,
>> I'm thinking that this is due to new hardware in the 980s which
>> isn't timing or handling interrupts correctly under the FreeBSD
>> Looking at a 'pciconf -lvb' from each system, I noticed that the 980
>> has two USB controllers which probe under ehci(4), while the 960
>> (which does not exhibit this problem), enumerates six uhci(4)
>> controllers and two ehci(4) controllers. To cut to the chase here,
>> the 960 users' keyboards probe under a USB1.0 uhci(4), while the
>> 980s only have ehci(4) devices to attach to.
>> So, I guess what I'm asking is - has anyone else seen any keyboard
>> repeat or other USB craziness with ehci(4) ports or otherwise Intel
>> PCH controllers? Any fellow Optiplex 980 users? I'd be more than
>> happy to provide pciconf or other output if requested.
> Try adding the following to /boot/loader.conf then reboot and see if
> the "excessive repeat" behaviour changes:
> It would also help if you would state exactly what brand/model of
> keyboard is used. Yes, believe it or not, it matters. dmesg output
> would be helpful in this case.
The keyboard is also a Dell model - model KB1421, or listed as "Dell
QuiteKey Keyboard" under dmesg. The same keyboard does not exhibit the
strange behavior when used with the older model of tower (Optiplex 960).
I'll reboot today with the loader.conf hint you provided. I'll let
you guys know if it helps. Thanks!
More information about the freebsd-stable