Freebsd 8.1 + xorg + radeonhd hang
Oliver Pinter
oliver.pntr at gmail.com
Tue Sep 14 23:01:23 UTC 2010
Hi all!
it's an old problem:
http://lists.freebsd.org/pipermail/freebsd-x11/2010-February/009372.html
And still exist... with or without dri/3d, it's a bug between freebsd
agp and xorg-server.
When you use vesa, than this problem is elliminated. With radeon or
radeon-hd driver, the problem come back, and the machine locked up.
When you killed the xserver, end kldunloaded the radeon modul, then
presented a small memory leak, and the radeon kernek modul is not
reloadable.
The DRI/DRM/3D is completly independent from this bug. The bug is in
libpciaccess or xorg-server. The old xserver (<=1.4.X) is bugfree....
On 9/15/10, Warren Block <wblock at wonkity.com> wrote:
> On Tue, 14 Sep 2010, Eivind E wrote:
>>
>
> First, the intermittent nature of the problem sounds like it might be
> hardware failure. The only easy way to test that would be to swap in
> another video board, but people rarely have extras.
>
> You also mentioned upgrading from 7.x to 8.1. It's worth running
> pkg_libchk from sysutils/bsdadminscripts to make sure nothing was
> missed.
>
> Back to the xorg.conf...
>
> Adding Option "Log" "Sync" to ServerLayout may help preserve the
> Xorg.0.log file. Untested by me so far, but shouldn't hurt.
>
>> I'll repost the xorg.conf here
>>
>> Section "ServerLayout"
>> Identifier "Layout0"
>> Screen 0 "Screen0" 0 0
>> InputDevice "Tastatur" "CoreKeyboard"
>> InputDevice "Mus" "CorePointer"
>> Option "AllowEmptyInput" "off"
>> EndSection
>
> AllowEmptyInput (and fire) bad! Use AutoAddDevices Off instead.
> (http://www.wonkity.com/~wblock/docs/html/aei.html)
>
>> Section "Files"
>> EndSection
>
> Looks wrong, but works here. I'd suggest leaving out the section
> entirely rather than leaving it empty, though.
>
>> Section "Module"
>> # Load "freetype"
>> # Load "xtt"
>> Load "extmod"
>> Load "glx"
>> Load "dri"
>> Load "dbe"
>> Load "record"
>> Load "xtrap"
>> Load "type1"
>> Load "speedo"
>> EndSection
>
> All but the commented first two and last three are default. Worth
> commenting out the last three and testing, too.
>
>> Section "Monitor"
>> Identifier "Skjerm"
>> HorizSync 31.5 - 48.5
>> VertRefresh 50.0 - 70.0
>> EndSection
>>
>> Section "Device"
>> Identifier "Grafikkort"
>> Driver "radeonhd"
>> Option "HPD" "off"
>> EndSection
>
> My success rate with the radeonhd driver is pretty much nonexistent.
>
>> Section "Screen"
>> Identifier "Screen0"
>> Device "Grafikkort"
>> Monitor "Skjerm"
>> DefaultDepth 16
>> SubSection "Display"
>> Depth 16
>> Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600"
>> "640x480"
>> EndSubSection
>> EndSection
>
> 16-bit? That may actually be slower than 24, depending on how the card
> is built. Should still work, though it's worth commenting out in both
> places for testing.
>
>> Section "DRI"
>> Mode 0666
>> EndSection
>
> Should not cause a problem, although I use 0660.
>
> My full xorg.conf for the X1650 is here:
> http://wonkity.com/~wblock/radeon/x1650/xorg.conf
> _______________________________________________
> freebsd-stable at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"
>
More information about the freebsd-stable
mailing list