MSIX failure

[Jack Vogel]

Email to Gareth de Vaux is bouncing :(

First off, this device was not supported in 8.0 REL, what were you running
that last
worked?

Do you have MSI disabled on this system of yours, the reason for this
message
is that both MSIX and MSI setup failed, your device should succeed with MSI.

Tell me more about the system please?

Jack


On Mon, Sep 6, 2010 at 11:36 AM, Jack Vogel <jfvogel at gmail.com> wrote:

> In the future make sure that you put E1000 or EM in the title otherwise I
> might miss it,
> fortunately I looked at this :)
>
> I'm on a holiday weekend, I will investigate this tomorrow.
>
> Jack
>
>
>
> On Mon, Sep 6, 2010 at 8:53 AM, Gareth de Vaux <bsd at lordcow.org> wrote:
>
>> Hi all, I moved from 8.0-RELEASE to last week's -STABLE:
>>
>> $ uname -v
>> FreeBSD 8.1-STABLE #0: Thu Sep  2 16:38:02 SAST 2010 root at XXXXX
>> :/usr/obj/usr/src/sys/GENERIC
>>
>> and all seems well except my network card is unusable. On boot up:
>>
>> em0: <Intel(R) PRO/1000 Network Connection 7.0.5> port 0x3040-0x305f mem
>> 0xe3200000-0xe321ffff,0xe3220000-0xe3220fff irq 10 at device 25.0 on pci0
>> em0: Setup MSIX failure
>> em0: [FILTER]
>> em0: Ethernet address: 00:27:0e:1e:5e:e3
>>
>> em1: <Intel(R) PRO/1000 Legacy Network Connection 1.0.1> port
>> 0x1000-0x103f mem 0xe3120000-0xe313ffff,0xe3100000-0xe311ffff irq 9 at
>> device 1.0 on pci5
>> em1: [FILTER]
>> em1: Ethernet address: 00:1b:21:5b:f2:18
>>
>>
>> em0 is a PCI 'Intel(R) PRO/1000 GT Desktop Adapter' which worked up until
>> now.
>> em1 is onboard which didn't work with 8.0-RELEASE either.
>>
>>
>> $ ifconfig em0
>> em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
>>
>>  options=219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC>
>>        ether 00:27:0e:1e:5e:e3
>>        inet XXXXXXXX
>>        media: Ethernet autoselect
>>        status: no carrier
>>
>>
>> pciconf -lv:
>>
>> em0 at pci0:0:25:0:        class=0x020000 card=0x00008086 chip=0x10f08086
>> rev=0x05 hdr=0x00
>>    vendor     = 'Intel Corporation'
>>    class      = network
>>    subclass   = ethernet
>>
>> em1 at pci0:5:1:0: class=0x020000 card=0x13768086 chip=0x107c8086 rev=0x05
>> hdr=0x00
>>    vendor     = 'Intel Corporation'
>>    device     = 'Gigabit Ethernet Controller (Copper) rev 5 (82541PI)'
>>    class      = network
>>    subclass   = ethernet
>>
>> (no device listing for em0)
>>
>> Swapping the PCI card with a PCI-X version gives the same behaviour.
>> Setting
>> hw.pci.enable_msix and hw.pci.enable_msi to 0 doesn't help in either case.
>> _______________________________________________
>> freebsd-stable at freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
>> To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"
>>
>
>