cdrtools /devel and wodim broken
Paul B Mahol
onemda at gmail.com
Tue Oct 26 12:29:34 UTC 2010
On 10/26/10, Jakub Lach <jakub_lach at mailplus.pl> wrote:
> Joerg Schilling-3 wrote:
>> wodim is a dead end from a 6 year old version of cdrecord with the DVD
>> ripped off and replaced by something broken. But there have been even more
>> added to wodim and it is not under "development" since May 2007.
>> If cdrecord gives the same message, I encourage you to make a kernel bug
>> This message is a hint to a serious kernel problem. A sense key value -1
>> happen, so you need to find out why the SCSI command has not been
>> correctly by the kernel.
> Hi Joerg.
> I usually prefer cdrtools, wodim was convenient way to
> try old code.
> After booting GENERIC kernel + ahci driver and compiling
> cdrtools release problem is still present.
> Full message.
> cdrecord: No write mode specified.
> cdrecord: Assuming -sao mode.
> cdrecord: If your drive does not accept -sao, try -tao.
> cdrecord: Future versions of cdrecord may have different drive dependent
> Cdrecord-ProDVD-ProBD-Clone 3.00 (amd64-unknown-freebsd8.1) Copyright (C)
> 1995-2010 Joerg Schilling
> TOC Type: 1 = CD-ROM
> scsidev: '1,0,0'
> scsibus: 1 target: 0 lun: 0
> Using libscg version 'schily-0.9'.
> SCSI buffer size: 65536
> atapi: 0
> Device type : Removable CD-ROM
> Version : 0
> Response Format: 2
> Capabilities :
> Vendor_info : 'HL-DT-ST'
> Identifikation : 'DVDRAM GSA-U20N '
> Revision : 'HX11'
> Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
> Current: DVD-R sequential recording
> Profile: DVD-RAM
> Profile: DVD-R sequential recording (current)
> Profile: DVD-R/DL sequential recording
> Profile: DVD-R/DL layer jump recording
> Profile: DVD-RW sequential recording
> Profile: DVD-RW restricted overwrite
> Profile: DVD+RW
> Profile: DVD+R
> Profile: DVD+R/DL
> Profile: DVD-ROM
> Profile: CD-R
> Profile: CD-RW
> Profile: CD-ROM
> Profile: Removable Disk
> Using generic SCSI-3/mmc-2 DVD-R/DVD-RW/DVD-RAM driver (mmc_dvd).
> Driver flags : NO-CD DVD MMC-3 SWABAUDIO BURNFREE
> Supported modes: PACKET SAO LAYER_JUMP
> Drive buf size : 1114112 = 1088 KB
> Drive pbuf size: 1966080 = 1920 KB
> Drive DMA Speed: 15100 kB/s 85x CD 10x DVD 3x BD
> FIFO size : 4194304 = 4096 KB
> Track 01: data 2858 MB
> Total size: 2858 MB = 1463428 sectors
> Current Secsize: 2048
> Total power on hours: 0
> Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 835068
> Starting to write CD/DVD/BD at speed 8 in real SAO mode for single session.
> Last chance to quit, starting real write 0 seconds. Operation starts.
> Waiting for reader process to fill input buffer ... input buffer ready.
> BURN-Free is ON.
> Turning BURN-Free off
> Starting new track at sector: 0
> Track 01: 0 of 2858 MB written.cdrecord: Input/output error. write_g1:
> scsi sendcmd: retryable error
> CDB: 2A 00 00 00 00 00 00 00 20 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00
> Sense Key: 0xFFFFFFFF , Segment 0
> Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 23.946s timeout 200s
> write track data: error after 0 bytes
> cdrecord: A write error occured.
> cdrecord: Please properly read the error message above.
> Writing time: 29.002s
> Average write speed 74.7x.
> Fixating time: 22.355s
> cdrecord: fifo had 64 puts and 1 gets.
> cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
> I destroyed all my spare media, so I'm also spared from burning problems
> for now ;)
And what kind of spare media was that?
> I'm quite puzzled that only I have reported such problems,
> it's like I'm on CURRENT again..
I burned bunch of DVD-R, DVD+R and DVD+R DL on FreeBSD 9.0 without any
problems, using growisofs from ports.
Only problem I ever had was mounting multi-sesion after 4GB (but -r
flag is nice workaround).
More information about the freebsd-stable