kernel compile failure
Larry Rosenman
ler at lerctr.org
Mon Feb 15 09:43:54 UTC 2010
I'm getting:
cc -c -O2 -frename-registers -pipe -fno-strict-aliasing -std=c99 -g -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -Wundef -Wno-pointer-sign -fformat-extensions -nostdinc -I. -I/usr/src/sys -I/usr/src/sys/contrib/altq -D_KERNEL -DHAVE_KERNEL_OPTION_HEADERS -include opt_global.h -fno-common -finline-limit=8000 --param inline-unit-growth=100 --param large-function-growth=1000 -fno-omit-frame-pointer -mcmodel=kernel -mno-red-zone -mfpmath=387 -mno-sse -mno-sse2 -mno-sse3 -mno-mmx -mno-3dnow -msoft-float -fno-asynchronous-unwind-tables -ffreestanding -fstack-protector -Werror /usr/src/sys/cam/ata/ata_xpt.c
/usr/src/sys/cam/ata/ata_xpt.c: In function 'probestart':
/usr/src/sys/cam/ata/ata_xpt.c:331: error: 'ATA_SF_PUIS_SPINUP' undeclared (first use in this function)
/usr/src/sys/cam/ata/ata_xpt.c:331: error: (Each undeclared identifier is reported only once
/usr/src/sys/cam/ata/ata_xpt.c:331: error: for each function it appears in.)
/usr/src/sys/cam/ata/ata_xpt.c: In function 'probedone':
/usr/src/sys/cam/ata/ata_xpt.c:789: error: 'ATA_RESP_INCOMPLETE' undeclared (first use in this function)
*** Error code 1
Stop in /usr/obj/usr/src/sys/BORG.
*** Error code 1
Stop in /usr/src.
*** Error code 1
Stop in /usr/src.
with a RELENG_8 csup'ed yesterday.
Any ideas?
kernel Config:
#
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD: src/sys/amd64/conf/GENERIC,v 1.475 2007/04/10 21:40:12 pjd Exp $
cpu HAMMER
ident BORG
# To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" # Default places to look for devices.
makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols
#options SCHED_4BSD # 4BSD scheduler
options SCHED_ULE # ULE scheduler
options PREEMPTION # Enable kernel thread preemption
options INET # InterNETworking
options INET6 # IPv6 communications protocols
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_ACL # Support for access control lists
options UFS_DIRHASH # Improve performance on big directories
options UFS_GJOURNAL # Enable gjournal-based UFS journaling
options MD_ROOT # MD is a potential root device
options NFSCLIENT # Network Filesystem Client
options NFSSERVER # Network Filesystem Server
options NFS_ROOT # NFS usable as /, requires NFSCLIENT
options NFSLOCKD # Network Lock Manager
options NTFS # NT File System
options MSDOSFS # MSDOS Filesystem
options CD9660 # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
options GEOM_PART_GPT # GUID Partition Tables.
options GEOM_LABEL # Provides labelization
options COMPAT_43TTY # BSD 4.3 TTY compat [KEEP THIS!]
options COMPAT_IA32 # Compatible with i386 binaries
options COMPAT_FREEBSD4 # Compatible with FreeBSD4
options COMPAT_FREEBSD5 # Compatible with FreeBSD5
options COMPAT_FREEBSD6 # Compatible with FreeBSD6
#8+
options COMPAT_FREEBSD7 # Compatible with FreeBSD7
options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
options KTRACE # ktrace(1) support
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
###8+ default now
#options ADAPTIVE_GIANT # Giant mutex is adaptive.
#options STOP_NMI # Stop CPUS using NMI instead of IPI
options AUDIT
options INCLUDE_CONFIG_FILE
# Debugging for use in -current
options KDB # Enable kernel debugger support.
options KDB_TRACE # Enable kernel debugger support.
options KDB_UNATTENDED # Enable kernel debugger support.
options DDB # Support DDB.
options GDB # Support remote GDB.
options STACK
#options INVARIANTS # Enable calls of extra sanity checking
#options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS
#options WITNESS # Enable checks to detect deadlocks and cycles
#options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed
# Make an SMP-capable kernel by default
options SMP # Symmetric MultiProcessor Kernel
# Bus support.
device acpi
device pci
# Floppy drives
device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
#device ataraid # ATA RAID drives
device atapicd # ATAPI CDROM drives
#device atapifd # ATAPI floppy drives
#device atapist # ATAPI tape drives
device atapicam # ATA CAM Layer
options ATA_STATIC_ID # Static device numbering
device ahci
# SCSI peripherals
device scbus # SCSI bus (required for SCSI)
device ch # SCSI media changers
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI access)
device ses # SCSI Environmental Services (and SAF-TE)
device sg # Linux SG Stuff
#----
device pt #SCSI processor
device targ #SCSI Target Mode Code
device targbh #SCSI Target Mode Blackhole Device
#----
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device kbdmux # keyboard multiplexer
device vga # VGA video card driver
device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device sc
device agp # support several AGP chipsets
# Serial (COM) ports
#device sio # 8250, 16[45]50 based serial ports
device uart # Generic UART driver
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to sio, uart and/or ppc drivers):
#device puc
# PCI Ethernet NICs.
device em # Intel PRO/1000 adapter Gigabit Ethernet Card
# Wireless NIC cards
#device wlan # 802.11 support
#device wlan_wep # 802.11 WEP support
#device wlan_ccmp # 802.11 CCMP support
#device wlan_tkip # 802.11 TKIP support
#device wlan_amrr # 802.11 AMRR support
# Pseudo devices.
device loop # Network loopback
device random # Entropy device
device ether # Ethernet support
#device sl # Kernel SLIP
#device ppp # Kernel PPP
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying (translation)
device firmware # firmware assist module
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device bpf # Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ehci # EHCI PCI->USB interface (USB 2.0)
device usb # USB Bus (required)
#device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
#device ural # Ralink Technology RT2500USB wireless NICs
device urio # Diamond Rio 500 MP3 player
#device uscanner # Scanners
#############
# The cpufreq(4) driver provides support for non-ACPI CPU frequency control
#device cpufreq
# Direct Rendering modules for 3D acceleration.
device drm # DRM core module required by DRM drivers
device radeondrm # ATI Radeon
options HWPMC_HOOKS
device smbus # Bus support, required for smb below.
device intpm
device ichsmb
device smb
device iicbus # Bus support, required for ic/iic/iicsmb below.
device iicbb
device ic
device iic
device iicsmb # smb over i2c bridge
device crypto # core crypto support
device cryptodev # /dev/crypto for access to h/w
device rndtest # FIPS 140-2 entropy tester
device ipmi
device smbios
options SCTP
#options BREAK_TO_DEBUGGER
#options ALT_BREAK_TO_DEBUGGER
device coretemp # Core temp (CORE procs and newer)
#ungarble messages
options PRINTF_BUFR_SIZE=128
#####KTR Stuff
options KTR
options KTR_COMPILE=(KTR_SCHED)
options KTR_MASK=(KTR_SCHED)
options KTR_ENTRIES=262144
--
Larry Rosenman http://www.lerctr.org/~ler
Phone: +1 512-248-2683 E-Mail: ler at lerctr.org
US Mail: 430 Valona Loop, Round Rock, TX 78681-3893
More information about the freebsd-stable
mailing list