Recent MFC to 7 causes crash on VMware ESXi
Tom McLaughlin
tmclaugh at sdf.lonestar.org
Fri Feb 5 03:17:14 UTC 2010
Hi all, a recent MFC to 7-STABLE has started to cause issues for my VMs
on VMware ESXi 3.5u4. After loading the mpt driver for the LSI disk
controller the VM just shuts off. The workaround is to change the disk
controller to the BusLogic type. Still, it used to work up until last
week. The change was made around January 26th and based on the commits
that day I'm guessing it's either r203047 or r203073
I have the same issue with both amd64 and i386 VMs. This affects HEAD
and 8-STABLE as well and first affected HEAD over the summer. (I just
worked around it and went about my business at the time. :-/) I've
attached a dmesg from a kernel before the problem and one from after it
started.
tom
--
| tmclaugh at sdf.lonestar.org tmclaugh at FreeBSD.org |
| FreeBSD http://www.FreeBSD.org |
-------------- next part --------------
SMAP type=01 base=0000000000000000 len=000000000009f800
SMAP type=02 base=000000000009f800 len=0000000000000800
SMAP type=02 base=00000000000ca000 len=0000000000002000
SMAP type=02 base=00000000000dc000 len=0000000000024000
SMAP type=01 base=0000000000100000 len=000000001fdf0000
SMAP type=03 base=000000001fef0000 len=000000000000f000
SMAP type=04 base=000000001feff000 len=0000000000001000
SMAP type=01 base=000000001ff00000 len=0000000000100000
SMAP type=02 base=00000000fec00000 len=0000000000010000
SMAP type=02 base=00000000fee00000 len=0000000000001000
SMAP type=02 base=00000000fffe0000 len=0000000000020000
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-STABLE #4 r202734: Tue Feb 2 13:41:42 EST 2010
tom at freebsd-72-amd64.straycat.dhs.org:/usr/obj/usr/src/sys/GENERIC amd64
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80d07000.
Calibrating clock(s) ... i8254 clock: 1185751 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2212349803 Hz
CPU: Dual-Core AMD Opteron(tm) Processor 1214 (2212.35-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x40f33 Stepping = 3
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x9<LAHF,ExtAPIC>
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
usable memory = 523595776 (499 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
0x0000000000d34000 - 0x000000001efb7fff, 505954304 bytes (123524 pages)
0x000000001ff00000 - 0x000000001ffeffff, 983040 bytes (240 pages)
avail memory = 502796288 (479 MB)
ACPI APIC Table: <PTLTD APIC >
APIC: CPU 0 has ACPI ID 0
ULE: setup cpu group 0
ULE: setup cpu 0
ULE: adding cpu 0 to group 0: cpus 1 mask 0x1
ACPI: RSDP @ 0x0xf6c60/0x0014 (v 0 PTLTD )
ACPI: RSDT @ 0x0x1fefab68/0x0030 (v 1 PTLTD RSDT 0x06040000 LTP 0x00000000)
ACPI: FACP @ 0x0x1fefef14/0x0074 (v 1 INTEL 440BX 0x06040000 PTL 0x000F4240)
ACPI: DSDT @ 0x0x1fefab98/0x437C (v 1 PTLTD Custom 0x06040000 MSFT 0x0100000D)
ACPI: FACS @ 0x0x1fefffc0/0x0040
ACPI: APIC @ 0x0x1fefef88/0x0050 (v 1 PTLTD APIC 0x06040000 LTP 0x00000000)
ACPI: BOOT @ 0x0x1fefefd8/0x0028 (v 1 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001)
MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0: intpin 9 polarity: low
ioapic0: intpin 9 trigger: level
ioapic0 <Version 1.1> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x80040011 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
wlan: <802.11 Link Layer>
wlan_amrr: <AMRR Transmit Rate Control Algorithm>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
io: <I/O>
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Feb 2 2010 13:41:30)
acpi0: <PTLTD RSDT> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
AcpiOsDerivePciId: \_SB_.PCI0.PWR_.PCI_ -> bus 0 dev 7 func 3
acpi0: Power Button (fixed)
AcpiOsDerivePciId: \_SB_.PCI0.REGS -> bus 0 dev 0 func 0
AcpiOsDerivePciId: \_SB_.PCI0.ISA_.PIRX -> bus 0 dev 7 func 0
ACPI timer: 0/76 0/388 0/17 0/15 0/1265 0/47 0/891 0/15 0/32 0/336 -> 0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 9 10 11 14 15
Validation 0 255 N 0 3 4 5 6 7 9 10 11 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 14 15
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 9 N 0 3 4 5 6 7 9 10 11 14 15
Validation 0 9 N 0 3 4 5 6 7 9 10 11 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 14 15
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 14 15
Validation 0 11 N 0 3 4 5 6 7 9 10 11 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 14 15
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 9 10 11 14 15
Validation 0 255 N 0 3 4 5 6 7 9 10 11 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 14 15
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x7190, revid=0x01
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7191, revid=0x01
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x011f, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x84 (33000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7110, revid=0x08
domain=0, bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7111, revid=0x01
domain=0, bus=0, slot=7, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type I/O Port, range 32, base 0x1050, size 4, enabled
found-> vendor=0x8086, dev=0x7113, revid=0x08
domain=0, bus=0, slot=7, func=3
class=06-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[90]: type I/O Port, range 32, base 0x1040, size 4, enabled
found-> vendor=0x15ad, dev=0x0405, revid=0x00
domain=0, bus=0, slot=15, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type I/O Port, range 32, base 0x1060, size 4, enabled
map[14]: type Memory, range 32, base 0xf8000000, size 26, enabled
map[18]: type Memory, range 32, base 0xf4000000, size 23, enabled
found-> vendor=0x1000, dev=0x0030, revid=0x01
domain=0, bus=0, slot=16, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x06 (1500 ns), maxlat=0xff (63750 ns)
intpin=a, irq=9
map[10]: type I/O Port, range 32, base 0x1080, size 7, enabled
map[14]: type Memory, range 32, base 0xf4810000, size 12, enabled
pcib0: matched entry for 0.16.INTA
pcib0: slot 16 INTA hardwired to IRQ 17
found-> vendor=0x8086, dev=0x100f, revid=0x01
domain=0, bus=0, slot=17, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0113, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 64, base 0xf4820000, size 17, enabled
map[18]: type Memory, range 64, base 0xf4800000, size 16, enabled
map[20]: type I/O Port, range 32, base 0x1400, size 6, enabled
pcib0: matched entry for 0.17.INTA
pcib0: slot 17 INTA hardwired to IRQ 18
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: no prefetched decode
pcib1: could not get PCI interrupt routing table for \_SB_.PCI0.AGP_ - AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1050-0x105f at device 7.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1050
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=01 ostat0=50 ostat1=ff
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 49
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 50
ata1: [MPSAFE]
ata1: [ITHREAD]
pci0: <bridge> at device 7.3 (no driver attached)
vgapci0: <VGA-compatible display> port 0x1060-0x106f mem 0xf8000000-0xfbffffff,0xf4000000-0xf47fffff at device 15.0 on pci0
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x1080-0x10ff mem 0xf4810000-0xf4810fff irq 17 at device 16.0 on pci0
mpt0: Reserved 0x80 bytes for rid 0x10 type 4 at 0x1080
mpt0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0xf4810000
ioapic0: routing intpin 17 (PCI IRQ 17) to vector 51
mpt0: [MPSAFE]
mpt0: [ITHREAD]
mpt0: MPI Version=1.2.0.0
mpt0: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required).
em0: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0x1400-0x143f mem 0xf4820000-0xf483ffff,0xf4800000-0xf480ffff irq 18 at device 17.0 on pci0
em0: Memory Access and/or Bus Master bits were not set!
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xf4820000
em0: Reserved 0x40 bytes for rid 0x20 type 4 at 0x1400
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 52
em0: [FILTER]
em0: bpf attached
em0: Ethernet address: 00:0c:29:ee:bd:e9
em0: Link is up 1000 Mbps Full Duplex
acpi_acad0: <AC Adapter> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 53
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0047
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 10 00 64
psm: status 10 03 64
psm: status 10 03 64
psm: data ffffffff 00 807f9a2e
psm: status 10 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to vector 54
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ioapic0: routing intpin 7 (ISA IRQ 7) to vector 55
ppbus0: [MPSAFE]
ppbus0: [ITHREAD]
plip0: <PLIP network interface> on ppbus0
plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A, console
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 56
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ioapic0: routing intpin 3 (ISA IRQ 3) to vector 57
sio1: [FILTER]
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 81 part_id 80
ioapic0: routing intpin 6 (ISA IRQ 6) to vector 58
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x1010
powernow0: <Cool`n'Quiet K8> on cpu0
powernow0: STATUS: 0x0
powernow0: STATUS: maxfid: 0x00
powernow0: STATUS: maxvid: 0x00
device_attach: powernow0 attach returned 6
ex_isa_identify()
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xca000-0xcafff,0xdc000-0xdffff,0xe0000-0xe3fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 33186110 hz
Timecounter "TSC" frequency 2212349803 Hz quality 800
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
lo0: bpf attached
hptrr: no controller detected.
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
em0: link state changed to UP
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
acd0: setting PIO4 on PIIX4 chip
acd0: setting UDMA33 on PIIX4 chip
acd0: <VMware Virtual IDE CDROM Drive/00000001> CDROM drive at ata0 as master
acd0: read 171KB/s (171KB/s), 32KB buffer, UDMA33
acd0: Reads: CDDA stream
acd0: Writes:
acd0: Audio: play, 2 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-ROM 120mm data disc
Waiting 5 seconds for SCSI devices to settle
(xpt0:mpt0:0:-1:-1): reset bus
(probe0:mpt0:0:0:0): error 22
(probe0:mpt0:0:0:0): Unretryable Error
(probe0:mpt0:0:0:0): error 22
(probe0:mpt0:0:0:0): Unretryable Error
pass0 at mpt0 bus 0 target 0 lun 0
pass0: <VMware Virtual disk 1.0> Fixed Direct Access SCSI-2 device
pass0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit)
pass0: Command Queueing Enabled
da0 at mpt0 bus 0 target 0 lun 0
da0: <VMware Virtual disk 1.0> Fixed Direct Access SCSI-2 device
da0: 320.000MB/s transfers (160.000MHz DT, offset 127, 16bit)
da0: Command Queueing Enabled
da0: 8192MB (16777216 512 byte sectors: 255H 63S/T 1044C)
GEOM: new disk da0
ATA PseudoRAID loaded
Trying to mount root from ufs:/dev/da0s1a
start_init: trying /sbin/init
VMware memory control driver initialized
pci0: driver added
found-> vendor=0x8086, dev=0x7113, revid=0x08
domain=0, bus=0, slot=7, func=3
class=06-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0:0:7:3: reprobing on driver added
pci1: driver added
splash: image decoder found: daemon_saver
-------------- next part --------------
SMAP type=01 base=0000000000000000 len=000000000009f800
SMAP type=02 base=000000000009f800 len=0000000000000800
SMAP type=02 base=00000000000ca000 len=0000000000002000
SMAP type=02 base=00000000000dc000 len=0000000000024000
SMAP type=01 base=0000000000100000 len=000000001fdf0000
SMAP type=03 base=000000001fef0000 len=000000000000f000
SMAP type=04 base=000000001feff000 len=0000000000001000
SMAP type=01 base=000000001ff00000 len=0000000000100000
SMAP type=02 base=00000000fec00000 len=0000000000010000
SMAP type=02 base=00000000fee00000 len=0000000000001000
SMAP type=02 base=00000000fffe0000 len=0000000000020000
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.3-PRERELEASE #10 r203057: Tue Feb 2 20:17:24 EST 2010
tom at freebsd-72-amd64.straycat.dhs.org:/usr/obj/usr/src/sys/GENERIC amd64
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80d08000.
Calibrating clock(s) ... i8254 clock: 1192059 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2201350143 Hz
CPU: Dual-Core AMD Opteron(tm) Processor 1214 (2201.35-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x40f33 Stepping = 3
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x9<LAHF,ExtAPIC>
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
usable memory = 523591680 (499 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
0x0000000000d35000 - 0x000000001efb7fff, 505950208 bytes (123523 pages)
0x000000001ff00000 - 0x000000001ffeffff, 983040 bytes (240 pages)
avail memory = 502792192 (479 MB)
ACPI APIC Table: <PTLTD APIC >
APIC: CPU 0 has ACPI ID 0
ULE: setup cpu group 0
ULE: setup cpu 0
ULE: adding cpu 0 to group 0: cpus 1 mask 0x1
ACPI: RSDP @ 0x0xf6c60/0x0014 (v 0 PTLTD )
ACPI: RSDT @ 0x0x1fefab68/0x0030 (v 1 PTLTD RSDT 0x06040000 LTP 0x00000000)
ACPI: FACP @ 0x0x1fefef14/0x0074 (v 1 INTEL 440BX 0x06040000 PTL 0x000F4240)
ACPI: DSDT @ 0x0x1fefab98/0x437C (v 1 PTLTD Custom 0x06040000 MSFT 0x0100000D)
ACPI: FACS @ 0x0x1fefffc0/0x0040
ACPI: APIC @ 0x0x1fefef88/0x0050 (v 1 PTLTD APIC 0x06040000 LTP 0x00000000)
ACPI: BOOT @ 0x0x1fefefd8/0x0028 (v 1 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001)
MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0: intpin 9 polarity: low
ioapic0: intpin 9 trigger: level
ioapic0 <Version 1.1> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x80040011 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
wlan: <802.11 Link Layer>
wlan_amrr: <AMRR Transmit Rate Control Algorithm>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
io: <I/O>
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Feb 2 2010 20:17:10)
acpi0: <PTLTD RSDT> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
AcpiOsDerivePciId: \_SB_.PCI0.PWR_.PCI_ -> bus 0 dev 7 func 3
acpi0: Power Button (fixed)
AcpiOsDerivePciId: \_SB_.PCI0.REGS -> bus 0 dev 0 func 0
AcpiOsDerivePciId: \_SB_.PCI0.ISA_.PIRX -> bus 0 dev 7 func 0
ACPI timer: 0/397 0/1740 0/141 0/199 0/72 0/315 0/26 0/440 0/313 0/562 -> 0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 9 10 11 14 15
Validation 0 255 N 0 3 4 5 6 7 9 10 11 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 14 15
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 9 N 0 3 4 5 6 7 9 10 11 14 15
Validation 0 9 N 0 3 4 5 6 7 9 10 11 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 14 15
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 14 15
Validation 0 11 N 0 3 4 5 6 7 9 10 11 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 14 15
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 9 10 11 14 15
Validation 0 255 N 0 3 4 5 6 7 9 10 11 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 14 15
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x7190, revid=0x01
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7191, revid=0x01
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x011f, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x84 (33000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7110, revid=0x08
domain=0, bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7111, revid=0x01
domain=0, bus=0, slot=7, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type I/O Port, range 32, base 0x1050, size 4, enabled
found-> vendor=0x8086, dev=0x7113, revid=0x08
domain=0, bus=0, slot=7, func=3
class=06-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[90]: type I/O Port, range 32, base 0x1040, size 4, enabled
found-> vendor=0x15ad, dev=0x0405, revid=0x00
domain=0, bus=0, slot=15, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type I/O Port, range 32, base 0x1060, size 4, enabled
map[14]: type Memory, range 32, base 0xf8000000, size 26, enabled
map[18]: type Memory, range 32, base 0xf4000000, size 23, enabled
found-> vendor=0x1000, dev=0x0030, revid=0x01
domain=0, bus=0, slot=16, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x06 (1500 ns), maxlat=0xff (63750 ns)
intpin=a, irq=9
map[10]: type I/O Port, range 32, base 0x1080, size 7, enabled
map[14]: type Memory, range 32, base 0xf4810000, size 12, enabled
pcib0: matched entry for 0.16.INTA
pcib0: slot 16 INTA hardwired to IRQ 17
found-> vendor=0x8086, dev=0x100f, revid=0x01
domain=0, bus=0, slot=17, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0113, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 64, base 0xf4820000, size 17, enabled
map[18]: type Memory, range 64, base 0xf4800000, size 16, enabled
map[20]: type I/O Port, range 32, base 0x1400, size 6, enabled
pcib0: matched entry for 0.17.INTA
pcib0: slot 17 INTA hardwired to IRQ 18
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: no prefetched decode
pcib1: could not get PCI interrupt routing table for \_SB_.PCI0.AGP_ - AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1050-0x105f at device 7.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1050
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=01 ostat0=50 ostat1=ff
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 49
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 atto vector 50
ata1: [MPSAFE]
ata1: [ITHREAD]
pci0: <bridge> at device 7.3 (no driver attached)
vgapci0: <VGA-compatible display> port 0x1060-0x106f mem 0xf8000000-0xfbffffff,0xf4000000-0xf47fffff at device 15.0 on pci0
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x1080-0x10ff mem 0xf4810000-0xf4810fff irq 17 at device 16.0 on pci0
mpt0: Reserved 0x80 bytes for rid 0x10 type 4 at 0x1080
mpt0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0xf4810000
More information about the freebsd-stable
mailing list