PATA disks/DVD not detected on ATI IXP 700 - cannot boot (dmesg
attached)
Dennis Chikin
ornoph at gmail.com
Mon Sep 28 10:15:52 UTC 2009
> Is it means that all works with this patch?
No visible ata-specific faults encountered after loading the kernel.
> Can you show dmesg from patched system?
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RELEASE-p3 #0: Sun Sep 27 23:57:27 YEKST 2009
root at hq.sps.org:/work/usr/obj/work/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0882000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0882188.
Calibrating clock(s) ... i8254 clock: 1193131 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 3100300862 Hz
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ (3100.30-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x60fb2 Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
TSC: P-state invariant
Cores per package: 2
Data TLB: 32 entries, fully associative
Instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory = 1610285056 (1535 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x000000005e460fff, 1568915456 bytes (383036 pages)
avail memory = 1568407552 (1495 MB)
Table 'FACP' at 0x5ffb0290
Table 'APIC' at 0x5ffb0390
MADT: Found table at 0x5ffb0390
MP Configuration Table version 1.4 found at 0xc00fcd20
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 2: enabled
SMP: Added CPU 1 (AP)
MADT: Found CPU APIC ID 130 ACPI ID 3: disabled
MADT: Found CPU APIC ID 131 ACPI ID 4: disabled
ACPI APIC Table: <092208 APIC1629>
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
bios32: Found BIOS32 Service Directory header at 0xc00f0000
bios32: Entry = 0xf0010 (c00f0010) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x31
pnpbios: Found PnP BIOS data at 0xc00f4ea0
pnpbios: Entry = f0000:660a Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
ULE: setup cpu group 0
ULE: setup cpu 0
ULE: adding cpu 0 to group 0: cpus 1 mask 0x1
ULE: setup cpu group 1
ULE: setup cpu 1
ULE: adding cpu 1 to group 1: cpus 1 mask 0x2
ACPI: RSDP @ 0x0xf9d90/0x0024 (v 2 ACPIAM)
ACPI: XSDT @ 0x0x5ffb0100/0x0054 (v 1 092208 XSDT1629 0x20080922 MSFT
0x00000097)
ACPI: FACP @ 0x0x5ffb0290/0x00F4 (v 3 092208 FACP1629 0x20080922 MSFT
0x00000097)
ACPI: DSDT @ 0x0x5ffb0440/0x7214 (v 1 A78GM A78GM922 0x00000004 INTL
0x20051117)
ACPI: FACS @ 0x0x5ffbe000/0x0040
ACPI: APIC @ 0x0x5ffb0390/0x006C (v 1 092208 APIC1629 0x20080922 MSFT
0x00000097)
ACPI: MCFG @ 0x0x5ffb0400/0x003C (v 1 092208 OEMMCFG 0x20080922 MSFT
0x00000097)
ACPI: OEMB @ 0x0x5ffbe040/0x0071 (v 1 092208 OEMB1629 0x20080922 MSFT
0x00000097)
ACPI: HPET @ 0x0x5ffb7660/0x0038 (v 1 092208 OEMHPET 0x20080922 MSFT
0x00000097)
ACPI: SSDT @ 0x0x5ffb76a0/0x0350 (v 1 A M I POWERNOW 0x00000001 AMD
0x00000001)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
ioapic0 <Version 2.1> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010000
io: <I/O>
null: <null device, zero device>
kbd: new array size 4
kbd1 at kbdmux0
random: <entropy source, Software, Yarrow>
mem: <memory>
Pentium Pro MTRR support enabled
npx0: INT 16 interface
acpi0: <092208 XSDT1629> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xc439b000 pa 0x1000
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000a078
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=96001022)
pcibios: BIOS version 3.00
AcpiOsDerivePciId: \\_SB_.PCI0.RS78.NB2_ -> bus 0 dev 0 func 0
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
AcpiOsDerivePciId: \\_SB_.PCI0.SATA.SACS -> bus 0 dev 17 func 0
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi0: reservation of fee00000, 1000 (3) failed
acpi0: reservation of ffb80000, 80000 (3) failed
acpi0: reservation of fec10000, 20 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 5ff00000 (3) failed
ACPI HPET table warning: Sequence is non-zero (2)
ACPI timer: 0/3 0/5 0/3 0/3 1/2 0/3 0/4 0/3 0/3 0/3 -> 1
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 4 7 10 11 12 14 15
Validation 0 10 N 0 4 7 10 11 12 14 15
After Disable 0 255 N 0 4 7 10 11 12 14 15
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 4 7 10 11 12 14 15
Validation 0 11 N 0 4 7 10 11 12 14 15
After Disable 0 255 N 0 4 7 10 11 12 14 15
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 4 7 10 11 12 14 15
Validation 0 11 N 0 4 7 10 11 12 14 15
After Disable 0 255 N 0 4 7 10 11 12 14 15
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 4 7 10 11 12 14 15
Validation 0 10 N 0 4 7 10 11 12 14 15
After Disable 0 255 N 0 4 7 10 11 12 14 15
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 4 7 10 11 12 14 15
Validation 0 255 N 0 4 7 10 11 12 14 15
After Disable 0 255 N 0 4 7 10 11 12 14 15
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 4 7 10 11 12 14 15
Validation 0 255 N 0 4 7 10 11 12 14 15
After Disable 0 255 N 0 4 7 10 11 12 14 15
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 4 10 11 12 14 15
Validation 0 10 N 0 4 10 11 12 14 15
After Disable 0 255 N 0 4 10 11 12 14 15
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 4 7 10 11 12 14 15
Validation 0 255 N 0 4 7 10 11 12 14 15
After Disable 0 255 N 0 4 7 10 11 12 14 15
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: vend: 0x4353 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x1022, dev=0x9600, revid=0x00
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x9602, revid=0x00
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x9607, revid=0x00
domain=0, bus=0, slot=7, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.7.INTA
pcib0: slot 7 INTA hardwired to IRQ 19
found-> vendor=0x1002, dev=0x4390, revid=0x00
domain=0, bus=0, slot=17, func=0
class=01-01-8f, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0xc000, size 3, enabled
map[14]: type I/O Port, range 32, base 0xb000, size 2, enabled
map[18]: type I/O Port, range 32, base 0xa000, size 3, enabled
map[1c]: type I/O Port, range 32, base 0x9000, size 2, enabled
map[20]: type I/O Port, range 32, base 0x8000, size 4, enabled
map[24]: type Memory, range 32, base 0xfe8ff800, size 10, enabled
pcib0: matched entry for 0.17.INTA
pcib0: slot 17 INTA hardwired to IRQ 22
found-> vendor=0x1002, dev=0x4397, revid=0x00
domain=0, bus=0, slot=18, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
map[10]: type Memory, range 32, base 0xfe8fe000, size 12, enabled
pcib0: matched entry for 0.18.INTA
pcib0: slot 18 INTA hardwired to IRQ 16
found-> vendor=0x1002, dev=0x4398, revid=0x00
domain=0, bus=0, slot=18, func=1
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
map[10]: type Memory, range 32, base 0xfe8fd000, size 12, enabled
pcib0: matched entry for 0.18.INTA
pcib0: slot 18 INTA hardwired to IRQ 16
found-> vendor=0x1002, dev=0x4396, revid=0x00
domain=0, bus=0, slot=18, func=2
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0102, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xfe8ff000, size 8, enabled
pcib0: matched entry for 0.18.INTB
pcib0: slot 18 INTB hardwired to IRQ 17
found-> vendor=0x1002, dev=0x4397, revid=0x00
domain=0, bus=0, slot=19, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[10]: type Memory, range 32, base 0xfe8fc000, size 12, enabled
pcib0: matched entry for 0.19.INTA
pcib0: slot 19 INTA hardwired to IRQ 18
found-> vendor=0x1002, dev=0x4398, revid=0x00
domain=0, bus=0, slot=19, func=1
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[10]: type Memory, range 32, base 0xfe8fb000, size 12, enabled
pcib0: matched entry for 0.19.INTA
pcib0: slot 19 INTA hardwired to IRQ 18
found-> vendor=0x1002, dev=0x4396, revid=0x00
domain=0, bus=0, slot=19, func=2
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xfe8fa800, size 8, enabled
pcib0: matched entry for 0.19.INTB
pcib0: slot 19 INTB hardwired to IRQ 19
found-> vendor=0x1002, dev=0x4385, revid=0x3a
domain=0, bus=0, slot=20, func=0
class=0c-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0403, statreg=0xd230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x439c, revid=0x00
domain=0, bus=0, slot=20, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
MSI supports 2 messages
map[20]: type I/O Port, range 32, base 0xff00, size 4, enabled
found-> vendor=0x1002, dev=0x4383, revid=0x00
domain=0, bus=0, slot=20, func=2
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0410, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 64, base 0xfe8f4000, size 14, enabled
pcib0: matched entry for 0.20.INTA
pcib0: slot 20 INTA hardwired to IRQ 16
found-> vendor=0x1002, dev=0x439d, revid=0x00
domain=0, bus=0, slot=20, func=3
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x4384, revid=0x00
domain=0, bus=0, slot=20, func=4
class=06-04-01, hdrtype=0x01, mfdev=1
cmdreg=0x0105, statreg=0x02a0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x4399, revid=0x00
domain=0, bus=0, slot=20, func=5
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=11
map[10]: type Memory, range 32, base 0xfe8f9000, size 12, enabled
pcib0: matched entry for 0.20.INTC
pcib0: slot 20 INTC hardwired to IRQ 18
found-> vendor=0x1022, dev=0x1100, revid=0x00
domain=0, bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
domain=0, bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
domain=0, bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
domain=0, bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xd000-0xdfff
pcib1: memory decode 0xfe900000-0xfeafffff
pcib1: prefetched decode 0xd0000000-0xdfffffff
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x1002, dev=0x9610, revid=0x00
domain=0, bus=1, slot=5, func=0
class=03-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0107, statreg=0x4010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Prefetchable Memory, range 32, base 0xd0000000, size 28, enabled
pcib1: requested memory range 0xd0000000-0xdfffffff: good
map[14]: type I/O Port, range 32, base 0xd000, size 8, enabled
pcib1: requested I/O range 0xd000-0xd0ff: in range
map[18]: type Memory, range 32, base 0xfeaf0000, size 16, enabled
pcib1: requested memory range 0xfeaf0000-0xfeafffff: good
map[24]: type Memory, range 32, base 0xfe900000, size 20, enabled
pcib1: requested memory range 0xfe900000-0xfe9fffff: good
pcib1: matched entry for 1.5.INTA
pcib1: slot 5 INTA hardwired to IRQ 18
found-> vendor=0x1002, dev=0x960f, revid=0x00
domain=0, bus=1, slot=5, func=1
class=04-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0107, statreg=0x4010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 3 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0xfeae8000, size 14, enabled
pcib1: requested memory range 0xfeae8000-0xfeaebfff: good
pcib1: matched entry for 1.5.INTB
pcib1: slot 5 INTB hardwired to IRQ 19
vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem
0xd0000000-0xdfffffff,0xfeaf0000-0xfeafffff,0xfe900000-0xfe9fffff irq
18 at device 5.0 on pci1
pci1: <multimedia, HDA> at device 5.1 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 19 at device 7.0 on pci0
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xe000-0xefff
pcib2: memory decode 0xfeb00000-0xfebfffff
pcib2: prefetched decode 0xfdf00000-0xfdffffff
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
found-> vendor=0x10ec, dev=0x8168, revid=0x02
domain=0, bus=2, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
MSI-X supports 2 messages in map 0x20
map[10]: type I/O Port, range 32, base 0xe800, size 8, enabled
pcib2: requested I/O range 0xe800-0xe8ff: in range
map[18]: type Memory, range 64, base 0xfebff000, size 12, enabled
pcib2: requested memory range 0xfebff000-0xfebfffff: good
map[20]: type Prefetchable Memory, range 64, base 0xfdff0000, size 16, enabled
pcib2: requested memory range 0xfdff0000-0xfdffffff: good
pcib2: matched entry for 2.0.INTA
pcib2: slot 0 INTA hardwired to IRQ 19
re0: <RealTek 8168/8168B/8168C/8168CP/8168D/8111B/8111C/8111CP PCIe
Gigabit Ethernet> port 0xe800-0xe8ff mem
0xfebff000-0xfebfffff,0xfdff0000-0xfdffffff irq 19 at device 0.0 on
pci2
re0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xfebff000
re0: MSI count : 1
re0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 256 to vector 49
re0: using IRQ 256 for MSI
re0: Using 1 MSI messages
re0: Chip rev. 0x3c000000
re0: MAC rev. 0x00400000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
re0: bpf attached
re0: Ethernet address: 00:e0:4d:a9:ad:dd
re0: [MPSAFE]
re0: [FILTER]
atapci0: <ATI (ID=43901002) AHCI controller> port
0xc000-0xc007,0xb000-0xb003,0xa000-0xa007,0x9000-0x9003,0x8000-0x800f
mem 0xfe8ff800-0xfe8ffbff irq 22 at device 17.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x8000
atapci0: Reserved 0x400 bytes for rid 0x24 type 3 at 0xfe8ff800
ioapic0: routing intpin 22 (PCI IRQ 22) to vector 50
atapci0: [MPSAFE]
atapci0: [ITHREAD]
atapci0: AHCI Version 01.10 controller with 4 ports detected
ata2: <ATA channel 0> on atapci0
ata2: SATA connect time=0ms
ata2: SIGNATURE: 00000101
ata2: ahci_reset devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: SATA connect status=00000000
ata3: ahci_reset devices=0x0
ata3: [MPSAFE]
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: SATA connect status=00000000
ata4: ahci_reset devices=0x0
ata4: [MPSAFE]
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: SATA connect status=00000000
ata5: ahci_reset devices=0x0
ata5: [MPSAFE]
ata5: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xfe8fe000-0xfe8fefff irq
16 at device 18.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe8fe000
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 51
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xfe8fd000-0xfe8fdfff irq
16 at device 18.1 on pci0
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe8fd000
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb1: OHCI version 1.0, legacy support
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 3 ports with 3 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe8ff000-0xfe8ff0ff
irq 17 at device 18.2 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe8ff000
ioapic0: routing intpin 17 (PCI IRQ 17) to vector 52
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
ehci0: Dropped interrupts workaround enabled
usb2: EHCI version 1.0
usb2: companion controllers, 3 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 6 ports with 6 removable, self powered
ohci2: <OHCI (generic) USB controller> mem 0xfe8fc000-0xfe8fcfff irq
18 at device 19.0 on pci0
ohci2: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe8fc000
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 53
ohci2: [GIANT-LOCKED]
ohci2: [ITHREAD]
usb3: OHCI version 1.0, legacy support
usb3: <OHCI (generic) USB controller> on ohci2
usb3: USB revision 1.0
uhub3: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 3 ports with 3 removable, self powered
ohci3: <OHCI (generic) USB controller> mem 0xfe8fb000-0xfe8fbfff irq
18 at device 19.1 on pci0
ohci3: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe8fb000
ohci3: [GIANT-LOCKED]
ohci3: [ITHREAD]
usb4: OHCI version 1.0, legacy support
usb4: <OHCI (generic) USB controller> on ohci3
usb4: USB revision 1.0
uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 3 ports with 3 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe8fa800-0xfe8fa8ff
irq 19 at device 19.2 on pci0
ehci1: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe8fa800
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 54
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
ehci1: Dropped interrupts workaround enabled
usb5: EHCI version 1.0
usb5: companion controllers, 3 ports each: usb3 usb4
usb5: <EHCI (generic) USB 2.0 controller> on ehci1
usb5: USB revision 2.0
uhub5: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb5
uhub5: 6 ports with 6 removable, self powered
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci1: <ATI IXP700 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on
pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xff00
ata0: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=7f ostat1=7f
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata0: reset tp2 stat0=ff stat1=ff devices=0x0
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 55
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci1: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=50
ata1: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=50 stat1=00 devices=0x9<ATAPI_SLAVE,ATA_MASTER>
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 56
ata1: [MPSAFE]
ata1: [ITHREAD]
pci0: <multimedia, HDA> at device 20.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0xf000-0xfff
pcib3: no prefetched decode
pcib3: Subtractively decoded bridge.
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
ohci4: <OHCI (generic) USB controller> mem 0xfe8f9000-0xfe8f9fff irq
18 at device 20.5 on pci0
ohci4: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe8f9000
ohci4: [GIANT-LOCKED]
ohci4: [ITHREAD]
usb6: OHCI version 1.0, legacy support
usb6: <OHCI (generic) USB controller> on ohci4
usb6: USB revision 1.0
uhub6: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
uhub6: 2 ports with 2 removable, self powered
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 57
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to vector 58
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model NetMouse/NetScroll Optical, device ID 0-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq
2 on acpi0
fdc0: ic_type 90 part_id 80
ioapic0: routing intpin 6 (ISA IRQ 6) to vector 59
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
psmcpnp1: <PS/2 mouse port> irq 12 on acpi0
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x810
powernow0: <PowerNow! K8> on cpu0
cpu1: <ACPI CPU> on acpi0
powernow1: <PowerNow! K8> on cpu1
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ioapic0: routing intpin 7 (ISA IRQ 7) to vector 60
ppbus0: [MPSAFE]
ppbus0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio0: not probed (disabled)
sio1: not probed (disabled)
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 102154 -> 100000
procfs registered
lapic: Divisor 2, Frequency 100009714 hz
Timecounter "TSC" frequency 3100300862 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
ata1-slave: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=80 wire
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad2: setting PIO4 on IXP700 chip
ad2: setting UDMA100 on IXP700 chip
ad2: 76351MB <SAMSUNG SP8004H QW100-61> at ata1-master UDMA100
ad2: 156368016 sectors [155127C/16H/63S] 16 sectors/interrupt 1 depth queue
acd0: setting PIO4 on IXP700 chip
acd0: setting UDMA33 on IXP700 chip
acd0: <TOSHIBA ODD-DVD SD-R1512/1010> CDRW drive at ata1 as slave
acd0: read 8268KB/s (8268KB/s) write 8268KB/s (8268KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 16 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad4: 305245MB <Seagate ST3320418AS CC35> at ata2-master SATA300
ad4: 625142448 sectors [620181C/16H/63S] 16 sectors/interrupt 1 depth queue
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ioapic0: Assigning ISA IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 6 to local APIC 1
ioapic0: Assigning ISA IRQ 7 to local APIC 0
ioapic0: Assigning ISA IRQ 9 to local APIC 1
ioapic0: Assigning ISA IRQ 12 to local APIC 0
ioapic0: Assigning ISA IRQ 14 to local APIC 1
ioapic0: Assigning ISA IRQ 15 to local APIC 0
ioapic0: Assigning PCI IRQ 16 to local APIC 1
ioapic0: Assigning PCI IRQ 17 to local APIC 0
ioapic0: Assigning PCI IRQ 18 to local APIC 1
ioapic0: Assigning PCI IRQ 19 to local APIC 0
ioapic0: Assigning PCI IRQ 22 to local APIC 1
msi: Assigning MSI IRQ 256 to local APIC 0
GEOM: new disk ad2
GEOM: new disk ad4
GEOM_JOURNAL: Journal 103692779: ad4s4d contains data.
GEOM_JOURNAL: Journal 103692779: ad4s4d contains journal.
GEOM_JOURNAL: Journal ad4s4d clean.
GEOM_JOURNAL: Journal 2979540398: ad4s4e contains data.
GEOM_JOURNAL: Journal 2979540398: ad4s4e contains journal.
GEOM_JOURNAL: Journal ad4s4e clean.
Root mount waiting for: GJOURNAL
Trying to mount root from ufs:/dev/ad4s4a
start_init: trying /sbin/init
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
Linux ELF exec handler installed
linprocfs registered
tun0: bpf attached
More information about the freebsd-stable
mailing list