ale0 gets no carrier
Pyun YongHyeon
pyunyh at gmail.com
Thu Oct 22 18:36:50 UTC 2009
On Thu, Oct 22, 2009 at 08:22:50PM +0200, Marius N?nnerich wrote:
> Hi Pyun, all,
>
> today I installed FreeBSD 8-STABLE r198366 on a new Box. It has a Atheros nic:
> ale0 at pci0:2:0:0: class=0x020000 card=0x831c1043 chip=0x10261969
> rev=0xb0 hdr=0x00
> vendor = 'Attansic (Now owned by Atheros)'
> device = 'PCI-E ETHERNET CONTROLLER (AR8121/AR8113 )'
> class = network
> subclass = ethernet
>
> ale0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
> options=319a<TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MCAST,WOL_MAGIC>
> ether 00:24:8c:a4:0a:b3
> media: Ethernet autoselect (none)
> status: no carrier
>
> The nic gets no carrier at all. I tried against two known-working nics
> with a cross-over cable and against a dsl-modem.
> Any idea what to try? Will happily test patches.
>
Would you show me dmesg output related with ale(4)/atphy(4)?
Also show me the output "devinfo -rv | grep phy".
More information about the freebsd-stable
mailing list