fatal trap 12 in em1 taskq after upgrade to 7.2-REL
Alson van der Meulen
alson+ml at alm.flutnet.org
Wed Oct 21 18:01:12 UTC 2009
Hello,
I recently upgraded a server from RELENG_6_4 to RELENG_7_2 (both i386). Since
then, the box has started crashing regularly. The longest uptime since the
upgrade is 1d5h, the shortest is 2m35s. The backtrace is always similar:
Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address = 0x400
fault code = supervisor read, page not present
instruction pointer = 0x20:0xc0adc79e
stack pointer = 0x28:0xe585fc10
frame pointer = 0x28:0xe585fc24
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 34 (em1 taskq)
trap number = 12
panic: page fault
cpuid = 0
KDB: stack backtrace:
db_trace_self_wrapper(c0ba8989,e585faac,c07f2ab9,c0bca1e0,0,...) at db_trace_self_wrapper+0x26
kdb_backtrace(c0bca1e0,0,c0b61aee,e585fab8,0,...) at kdb_backtrace+0x29
panic(c0b61aee,c0bcb510,c56294dc,1,1,...) at panic+0x119
trap_fatal(c0cd3ec0,0,1,0,14,...) at trap_fatal+0x333
trap_pfault(0,20111ac,0,0,c56292b8,...) at trap_pfault+0x270
trap(e585fbd0) at trap+0x3fa
calltrap() at calltrap+0x6
--- trap 0xc, eip = 0xc0adc79e, esp = 0xe585fc10, ebp = 0xe585fc24 ---
_bus_dmamap_sync(c5615400,400,2,c5612690,0,...) at _bus_dmamap_sync+0xe
em_rxeof(246,c5612690,e585fca4,c5612690,e585fc9c,...) at em_rxeof+0x14a
em_handle_rxtx(c5635000,1,c5615380,c561539c,c0ba076a,...) at em_handle_rxtx+0x27
taskqueue_run(c5615380,c561539c,c0ba076a,0,e585fcf4,...) at taskqueue_run+0x175
taskqueue_thread_loop(c563935c,e585fd38,36626334,64636435,39396362,...) at taskqueue_thread_loop+0xc8
fork_exit(c08285a0,c563935c,e585fd38) at fork_exit+0x99
fork_trampoline() at fork_trampoline+0x8
--- trap 0, eip = 0, esp = 0xe585fd70, ebp = 0 ---
Uptime: 28m55s
Physical memory: 2027 MB
Dumping 194 MB: 179 163 147 131 115 99 83 67 51 35 19 3
Dump complete
Automatic reboot in 15 seconds - press a key on the console to abort
em1: watchdog timeout -- resetting
Fatal trap 12: page fault while in kernel mode
cpuid = 1; apic id = 01
fault virtual address = 0x400
fault code = supervisor read, page not present
instruction pointer = 0x20:0xc0adc79e
stack pointer = 0x28:0xc53e0c00
frame pointer = 0x28:0xc53e0c14
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 14 (swi4: clock sio)
trap number = 12
Rebooting...
The second fatal trap output is usually corrupted in the serial console output.
This box has been running 6.4 (and 6.3 and so on) without crashes for at least
a year, so a sudden hardware failure seems unlikely. It's an Intel entry level
server mainboard with a P4 (with HT) and dual onboard em(4). The server is
currently mostly idle, especially em1.
Dmesg:
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RELEASE-p4 #0: Tue Oct 20 04:15:46 CEST 2009
root at eraser.waalsdorp.nl:/usr/obj/usr/src/sys/ERASER
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (2992.71-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf43 Stepping = 3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x649d<SSE3,DTES64,MON,DS_CPL,EST,CNXT-ID,CX16,xTPR>
AMD Features=0x20000000<LM>
Logical CPUs per core: 2
real memory = 2138984448 (2039 MB)
avail memory = 2083450880 (1986 MB)
ACPI APIC Table: <A M I OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP/HT): APIC ID: 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
kbd1 at kbdmux0
acpi0: <A M I OEMRSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 500, 10 (4) failed
acpi0: reservation of 560, 20 (4) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7f700000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xcb80-0xcb87 mem 0xdfd00000-0xdfd7ffff,0xc0000000-0xcfffffff,0xdfd80000-0xdfdbffff irq 16 at device 2.0 on pci0
agp0: <Intel E7221 SVGA controller> on vgapci0
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci2
pci4: <ACPI PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0xef80-0xefbf mem 0xdffe0000-0xdfffffff irq 27 at device 3.0 on pci4
em0: [FILTER]
em0: Ethernet address: 00:0e:0c:4b:4b:89
pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci2
pci3: <ACPI PCI bus> on pcib3
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0xcc00-0xcc1f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0xcc80-0xcc9f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0xcd00-0xcd1f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xdfdff800-0xdfdffbff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib4
puc0: <Timedia technology 2 Port Serial> port 0xdf00-0xdf1f,0xde80-0xde87,0xde00-0xde07 irq 21 at device 2.0 on pci1
puc0: [FILTER]
uart0: <16550 or compatible> on puc0
uart0: [FILTER]
uart1: <16550 or compatible> on puc0
uart1: [FILTER]
em1: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0xdf80-0xdfbf mem 0xdfee0000-0xdfefffff irq 18 at device 3.0 on pci1
em1: [FILTER]
em1: Ethernet address: 00:0e:0c:4b:4b:88
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <Intel AHCI controller> port 0xcf80-0xcf87,0xcf00-0xcf03,0xce80-0xce87,0xce00-0xce03,0xcd80-0xcd8f mem 0xdfdffc00-0xdfdfffff irq 19 at device 31.2 on pci0
atapci1: [ITHREAD]
atapci1: AHCI Version 01.00 controller with 4 ports detected
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci1
ata5: [ITHREAD]
ichsmb0: <Intel 82801FB (ICH6) SMBus controller> port 0x400-0x41f irq 19 at device 31.3 on pci0
ichsmb0: [GIANT-LOCKED]
ichsmb0: [ITHREAD]
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
ipmi0: <IPMI System Interface> on smbus0
ipmi0: SSIF mode found at address 0x42 on smbus
acpi_button0: <Power Button> on acpi0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A, console
sio0: [FILTER]
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr f2b00000f2b
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr f2b00000f2b
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc9800-0xca7ff,0xca800-0xcb7ff,0xcb800-0xcc7ff,0xdc000-0xdffff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
acd0: CDRW <LITE-ON DVDRW LDW-451S/GSB6> at ata0-master UDMA33
ad4: 953869MB <WDC WD10EADS-00L5B1 01.01A01> at ata2-master SATA150
ad6: 953869MB <WDC WD10EADS-00L5B1 01.01A01> at ata3-master SATA150
ad8: 35304MB <WDC WD360GD-00FLA2 31.08F31> at ata4-master SATA150
ad10: 35304MB <WDC WD360GD-00FLA2 31.08F31> at ata5-master SATA150
ipmi0: IPMI device rev. 1, firmware rev. 2.81, version 1.5
ipmi0: Number of channels 0
ipmi0: Attached watchdog
SMP: AP CPU #1 Launched!
kernel config is GENERIC plus:
device puc
options ALT_BREAK_TO_DEBUGGER
options DDB
options KDB_TRACE
options KDB_UNATTENDED
device smbus
device smb
device ichsmb
options ROUTETABLES=2
regards,
Alson
More information about the freebsd-stable
mailing list