Problem with new Intel DX board and i7 Processor on reboot attempt
(locks)
Karl Denninger
karl at denninger.net
Wed Feb 18 10:08:17 PST 2009
Running 7-STABLE, compiled last night.
When attempting to reboot the system freezes at "stopping other CPUs"
and has to be hard-reset with either the power button or the RESET
switch. The problem is easily reproduced - typing "reboot" produces it :-)
I'm wondering if that ACPI warning in the boot sequence is involved in
this, and if so, if there is a recommended workaround?
Here's the "dmesg" from the subject system:
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.1-STABLE #0: Wed Feb 18 00:38:33 CST 2009
karl at Dbms2.denninger.net:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz (2666.78-MHz
K8-class CPU)
Origin = "GenuineIntel" Id = 0x106a4 Stepping = 4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x98e3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,<b19>,<b20>,<b23>>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
Cores per package: 8
Logical CPUs per core: 2
usable memory = 6418419712 (6121 MB)
avail memory = 6181691392 (5895 MB)
ACPI APIC Table: <INTEL DX58SO >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
ACPI Warning (tbfadt-0505): Optional field "Pm2ControlBlock" has zero
address or length: 0 450/0 [20070320]
ioapic0 <Version 2.0> irqs 0-23 on motherboard
lapic0: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <INTEL DX58SO> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
vgapci0: <VGA-compatible display> mem
0xd1000000-0xd1ffffff,0xe0000000-0xefffffff,0xd0000000-0xd0ffffff irq 16
at device 0.0 on pci2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 7.0 on pci0
pci3: <ACPI PCI bus> on pcib3
3ware device driver for 9000 series storage controllers, version:
3.70.05.001
twa0: <3ware 9000 series Storage Controller> port 0x2000-0x20ff mem
0xf0000000-0xf1ffffff,0xd2200000-0xd2200fff irq 16 at device 0.0 on pci3
twa0: [ITHREAD]
twa0: INFO: (0x04: 0x0053): Battery capacity test is overdue:
twa0: INFO: (0x15: 0x1300): Controller details:: Model 9650SE-8LPML, 8
ports, Firmware FE9X 4.06.00.004, BIOS BE9X 4.05.00.015
pci0: <base peripheral, interrupt controller> at device 16.0 (no driver
attached)
pci0: <base peripheral, interrupt controller> at device 16.1 (no driver
attached)
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver
attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver
attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver
attached)
pci0: <base peripheral, interrupt controller> at device 20.3 (no driver
attached)
em0: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0x30e0-0x30ff mem
0xd2300000-0xd231ffff,0xd2322000-0xd2322fff irq 20 at device 25.0 on pci0
em0: Using MSI interrupt
em0: [FILTER]
em0: Ethernet address: 00:1c:c0:94:a5:39
uhci0: <UHCI (generic) USB controller> port 0x30c0-0x30df irq 16 at
device 26.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x30a0-0x30bf irq 21 at
device 26.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x3080-0x309f irq 19 at
device 26.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd2321000-0xd23213ff irq
18 at d
evice 26.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci6: <ACPI PCI bus> on pcib6
atapci0: <Marvell 88SX6121 UDMA133 controller> port
0x1018-0x101f,0x1024-0x1027,0x1010-0x1017,0x1020-0x1023,0x1000-0x100f
mem 0xd2100000-0xd21003ff irq 16 at device 0.0 on pci6
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
uhci3: <UHCI (generic) USB controller> port 0x3060-0x307f irq 23 at
device 29.0 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0x3040-0x305f irq 19 at
device 29.1 on pci0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
uhci5: <UHCI (generic) USB controller> port 0x3020-0x303f irq 18 at
device 29.2 on pci0
uhci5: [GIANT-LOCKED]
uhci5: [ITHREAD]
usb6: <UHCI (generic) USB controller> on uhci5
usb6: USB revision 1.0
uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
uhub6: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xd2320000-0xd23203ff irq
23 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb7: EHCI version 1.0
usb7: companion controllers, 2 ports each: usb4 usb5 usb6
usb7: <EHCI (generic) USB 2.0 controller> on ehci1
usb7: USB revision 2.0
uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
uhub7: 6 ports with 6 removable, self powered
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci7: <ACPI PCI bus> on pcib7
fwohci0: <Texas Instruments TSB43AB22/A> mem
0xd2004000-0xd20047ff,0xd2000000-0xd2003fff irq 19 at device 3.0 on pci7
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:90:27:00:02:3f:c4:9c
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x15dc000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:90:27:3f:c4:9c
fwe0: Ethernet address: 02:90:27:3f:c4:9c
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:90:27:00:02:3f:c4:9c @ 0xfffe00000000, S400,
maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH10 SATA300 controller> port
0x3158-0x315f,0x316c-0x316f,0x3150-0x3157,0x3168-0x316b,0x3130-0x313f,0x3120-0x312f
irq 19 at device 31.2 on pci0
atapci1: [ITHREAD]
ata3: <ATA channel 0> on atapci1
ata3: [ITHREAD]
ata4: <ATA channel 1> on atapci1
ata4: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci2: <Intel ICH10 SATA300 controller> port
0x3148-0x314f,0x3164-0x3167,0x3140-0x3147,0x3160-0x3163,0x3110-0x311f,0x3100-0x310f
irq 18 at device 31.5 on pci0
atapci2: [ITHREAD]
ata5: <ATA channel 0> on atapci2
ata5: [ITHREAD]
ata6: <ATA channel 1> on atapci2
ata6: [ITHREAD]
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f0 irq 6 drq 2 on acpi0
fdc0: [FILTER]
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
cpu4: <ACPI CPU> on acpi0
est4: <Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
cpu5: <ACPI CPU> on acpi0
est5: <Enhanced SpeedStep Frequency Control> on cpu5
p4tcc5: <CPU Frequency Thermal Control> on cpu5
cpu6: <ACPI CPU> on acpi0
est6: <Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
cpu7: <ACPI CPU> on acpi0
est7: <Enhanced SpeedStep Frequency Control> on cpu7
p4tcc7: <CPU Frequency Thermal Control> on cpu7
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xcf000-0xd0fff on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: [ITHREAD]
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ata1: [ITHREAD]
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio1: [FILTER]
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
da0 at twa0 bus 0 target 0 lun 0
da0: <AMCC 9650SE-8LP DISK 4.06> Fixed Direct Access SCSI-5 device
da0: 100.000MB/s transfers
da0: 238408MB (488259584 512 byte sectors: 255H 63S/T 30392C)
da1 at twa0 bus 0 target 1 lun 0
da1: <AMCC 9650SE-8LP DISK 4.06> Fixed Direct Access SCSI-5 device
da1: 100.000MB/s transfers
da1: 238408MB (488259584 512 byte sectors: 255H 63S/T 30392C)
acd0: DVDR <SONY DVD RW DRU-V200S/1.60> at ata3-master SATA150
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
lapic4: Forcing LINT1 to edge trigger
SMP: AP CPU #4 Launched!
lapic2: Forcing LINT1 to edge trigger
SMP: AP CPU #2 Launched!
lapic5: Forcing LINT1 to edge trigger
SMP: AP CPU #5 Launched!
lapic7: Forcing LINT1 to edge trigger
SMP: AP CPU #7 Launched!
lapic3: Forcing LINT1 to edge trigger
SMP: AP CPU #3 Launched!
lapic6: Forcing LINT1 to edge trigger
SMP: AP CPU #6 Launched!
Trying to mount root from ufs:/dev/da0s1a
ukbd0: <CHESEN USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on uhub1
kbd2 at ukbd0
uhid0: <CHESEN USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on uhub1
em0: link state changed to UP
--
--
Karl Denninger
karl at denninger.net
More information about the freebsd-stable
mailing list