Gigabit cardbus re nic fails to attach

[Andrei Selivanov]

hi all

Per Otterström wrote:

>         Hi all.
>
>         I'm running 7.1-RELEASE.
>
>         When I plug in my D-Link DGE-660TD gigabit cardbus adapter I get:
>
>         re0: <RealTek 8169/8169S/8169SB(L)/8110S/8110SB(L) Gigabit Ethernet> port
>         0x4000-0x40ff mem 0xd0201000-0xd02011ff irq 11 at device 0.0 on cardbus1
>         re0: Chip rev. 0x10000000
>         re0: MAC rev. 0x00000000
>         re0: PHY write failed
>         re0: PHY write failed
>         re0: PHY read failed
>         re0: MII without any phy!
>         device_attach: re0 attach returned 6
>
>         Relevant part from pciconf -lv:
>
>         r... at pci0:6:0:0: class=0x020000 card=0x43011186 chip=0x816910ec rev=0x10
>         hdr=0x00
>             vendor     = 'Realtek Semiconductor'
>             device     = 'RTL8110SB Single-Chip Gigabit LOM Ethernet Controller'
>             class      = network
>             subclass   = ethernet
>
>         I've seen several patches for similar problems provided by Pyun YongHyeon,
>         but I don't think any one of them are applicable in my case.
>
>         Any advice appreciated.
>
>         regards, Pelle

            

i got same error on my 7.1 i386
dmesg output with hw.cardbus.debug="1" and hw.cardbus.cis_debug="1" is 
here -
http://pastebin.com/m63175351
i am ready to give shell access if anyone need it
wbr
Andrei