7.0-RC1 ath0 will not work for more than a couple days (Access Point)

Hugo Silva hugo at barafranca.com
Tue Jan 22 13:14:20 PST 2008


Aryeh M. Friedman wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> The most recently committed re(4) modifications correct this.
>
> Hugo Silva wrote:
>   
>> re0: discard frame w/o packet header re0: discard frame w/o packet
>> header re0: discard frame w/o packet header re0: discard frame w/o
>> packet header re0: discard frame w/o packet header re0: discard
>> frame w/o packet header re0: discard frame w/o packet header re0:
>> discard frame w/o packet header re0: discard frame w/o packet
>> header re0: discard frame w/o packet header re0: discard frame w/o
>> packet header re0: discard frame w/o packet header re0: discard
>> frame w/o packet header re0: discard frame w/o packet header re0:
>> discard frame w/o packet header re0: discard frame w/o packet
>> header re0: discard frame w/o packet header re0: discard frame w/o
>> packet header ath0: stuck beacon; resetting (bmiss count 4) ath0:
>> ath_reset: unable to reset hardware; hal status 3 ath0: stuck
>> beacon; resetting (bmiss count 4) ath0: ath_reset: unable to reset
>> hardware; hal status 3 ath0: device timeout ath0: stuck beacon;
>> resetting (bmiss count 4) ath0: ath_reset: unable to reset
>> hardware; hal status 3 ath0: device timeout ath0: stuck beacon;
>> resetting (bmiss count 4) ath0: ath_reset: unable to reset
>> hardware; hal status 3 ath0: device timeout ath0: stuck beacon;
>> resetting (bmiss count 4) ath0: ath_reset: unable to reset
>> hardware; hal status 3 ath0: stuck beacon; resetting (bmiss count
>> 4) ath0: ath_reset: unable to reset hardware; hal status 3 ath0:
>> stuck beacon; resetting (bmiss count 4) ath0: ath_reset: unable to
>> reset hardware; hal status 3 ath0: stuck beacon; resetting (bmiss
>> count 4) ath0: ath_reset: unable to reset hardware; hal status 3
>> ath0: stuck beacon; resetting (bmiss count 4) ath0: ath_reset:
>> unable to reset hardware; hal status 3 ath0: device timeout ath0:
>> stuck beacon; resetting (bmiss count 4) ath0: ath_reset: unable to
>> reset hardware; hal status 3 ath0: stuck beacon; resetting (bmiss
>> count 4) ath0: ath_reset: unable to reset hardware; hal status 3
>>
>>
>>
>>
>>
>> ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0
>> mtu 2290 inet 192.168.200.110 netmask 0xffffff00 broadcast
>> 192.168.200.255 media: IEEE 802.11 Wireless Ethernet autoselect
>> mode 11g <hostap> status: associated ssid zaurak_wifi channel 5
>> (2432 Mhz 11g) bssid authmode WPA2/802.11i privacy MIXED deftxkey 2
>> TKIP 2:128-bit TKIP 3:128-bit txpower 31.5 scanvalid 60 bgscan
>> bgscanintvl 300 bgscanidle 250 roam:rssi11g 7 roam:rate11g 5 pureg
>> protmode CTS wme burst hidessid -apbridge dtimperiod 1
>>
>>
>>
>>
>> FreeBSD zaurak.bsdlan.org 7.0-RC1 FreeBSD 7.0-RC1 #1: Wed Jan  2
>> 01:45:03 WET 2008 klr at zaurak.bsdlan.org:/usr/obj/usr/src/sys/ZAURAK
>> amd64
>>
>>
>>
>> ath0 at pci0:5:1:0:        class=0x020000 card=0x5a001385
>> chip=0x0013168c rev=0x01 hdr=0x00 vendor     = 'Atheros
>> Communications Inc.' device     = 'AR5212, AR5213 802.11a/b/g
>> Wireless Adapter' class      = network subclass   = ethernet
>> re0 at pci0:5:4:0: class=0x020000 card=0x820d1043 chip=0x816710ec
>> rev=0x10 hdr=0x00 vendor     = 'Realtek Semiconductor' device     =
>> 'RTL8169/8110 Family Gigabit Ethernet NIC' class      = network
>> subclass   = ethernet
>>
>>
>>
>>
>> ifconfig'ing ath0 up and down continuously will either make it
>> usable again for a few hours or result in a panic.
>>
>> Regards,
>>
>> Hugo
>>
>> _______________________________________________
>> freebsd-stable at freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-stable To
>> unsubscribe, send any mail to
>> "freebsd-stable-unsubscribe at freebsd.org"
>>
>>     
>
>
> - --
> Aryeh M. Friedman
> FloSoft Systems, Java Tool Developers
> Developer, not business, friendly
> http://www.flosoft-systems.com
>
>     "Free software != Free beer"
>
> Blog:
>  
> http://www.flosoft-systems.com/flosoft_systems_community/blogs/aryeh/index.php
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v2.0.4 (FreeBSD)
> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
>
> iD8DBQFHllsNQi2hk2LEXBARAobHAKDfiFNge8q3sst9Ia30GyTkSgy0FgCfbyq2
> rcnrU+x+AGRhTjkl0It4h90=
> =ybea
> -----END PGP SIGNATURE-----
>
>   

I will give it a try during this week -- thanks for the feedback.

Regards,

Hugo



More information about the freebsd-stable mailing list