FreeBSD 7 RC2 - Kernel Panic during install boot

Jeff Jennings jeff.jennings18 at gmail.com
Sun Feb 24 16:56:18 UTC 2008


Trying to boot the 7.0 RC2 CD (or floppies), the kernel panics with:

Fatal trap 12: page fault while in kernel mode

The CD boots fine on 3 other machines I've tried, but none have the
identical processor.  One has an identical motherboard, but it's running a
2.26 GHz P4 rather than the 3.0 GHz P4 on my failing machine.

The failing machine currently runs FreeBSD 6.3 just fine.

Here's the console log of the failing boot.  I also tried booting in safe
mode, the panic is slightly different but it still panics.  I also get the
same panic using the just released 7.0 RC3, but I had the 7.2 boot floppies
handy so I used that to get this trace.




-- 
Jeff Jennings
jeff.jennings18 at gmail.com
You can't solve a problem using the same thinking that got you there. -
A.Einstein
Learning something new is almost always a good idea. - B. Stroustrup
You don't become a failure until you're satisfied with being one. - fortune
No amount of careful planning will ever replace dumb luck.
-------------- next part --------------

/boot.config: /boot/loader
FreeBSD/i386 boot
Default: 0:fd(0,a)/boot/loader
boot:
Uncompressing ... done
                      Consoles: serial port
BIOS drive A: is disk0
BIOS drive C: is disk1
BIOS drive D: is disk2
BIOS 639kB/2095808kB available memory

FreeBSD/i386 bootstrap loader, Revision 1.1
(root at logan.cse.buffalo.edu, Thu Feb  7 18:48:10 UTC 2008)
Loading /boot/defaults/loader.conf
/kernel text=0x701ab4 \
Insert disk labelled "Kernel floppy 1" and press any key...
|
Insert disk labelled "Kernel floppy 2" and press any key...
/
Insert disk labelled "Kernel floppy 3" and press any key...
data=0xad6e0+0x5a680 syms=[0x4+0x70280+0x4+0x90382]
Insert boot floppy and press Enter
/acpi.ko text=0x520e8 data=0x23a0+0x186c syms=[0x4+0x85c0+0x4+0xb056]
/
Insert disk labelled "Memory Filesystem floppy 1" and press any key...
Insert boot floppy and press Enter
-

 ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
 ³                                         ³
 ³                                         ³      ______
 ³                                         ³     |  ____| __ ___  ___
 ³          Welcome to FreeBSD!            ³     | |__ | '__/ _ \/ _ \
 ³                                         ³     |  __|| | |  __/  __/
 ³                                         ³     | |   | | |    |    |
 ³  1. Boot FreeBSD [default]              ³     |_|   |_|  \___|\___|
 ³  2. Boot FreeBSD with ACPI disabled     ³      ____   _____ _____
 ³  3. Boot FreeBSD in Safe Mode           ³     |  _ \ / ____|  __ \
 ³  4. Boot FreeBSD in single user mode    ³     | |_) | (___ | |  | |
 ³  5. Boot FreeBSD with verbose logging   ³     |  _ < \___ \| |  | |
 ³  6. Escape to loader prompt             ³     | |_) |____) | |__| |
 ³  7. Reboot                              ³     |     |      |      |
 ³                                         ³     |____/|_____/|_____/
 ³                                         ³
 ³                                         ³
 ³                                         ³
 ³  Select option, [Enter] for default     ³
 ³  or [Space] to pause timer  6           ³
 ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ


Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RC2 #0: Fri Feb  8 00:09:57 UTC 2008
    root at logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (3000.87-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x4400<CNXT-ID,xTPR>
  Logical CPUs per core: 2
real memory  = 2147155968 (2047 MB)
avail memory = 2087518208 (1990 MB)
ACPI APIC Table: <A M I  OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <A M I OEMXSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7fef0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <SiS 655 host to AGP bridge> on hostb0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> mem 0xfd000000-0xfdffffff,0xe8000000-0xefffffff irq 16 at device 0.0 on pci1
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <SiS 964 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 2.5 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
ohci0: <SiS 5571 USB controller> mem 0xfebf9000-0xfebf9fff irq 20 at device 3.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 3 ports with 3 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xfebfa000-0xfebfafff irq 21 at device 3.1 on pci0
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: <SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 3 ports with 3 removable, self powered
ohci2: <SiS 5571 USB controller> mem 0xfebfb000-0xfebfbfff irq 22 at device 3.2 on pci0
ohci2: [GIANT-LOCKED]
ohci2: [ITHREAD]
usb2: OHCI version 1.0, legacy support
usb2: <SiS 5571 USB controller> on ohci2
usb2: USB revision 1.0
uhub2: <SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebfe000-0xfebfefff irq 23 at device 3.3 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 3 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <SiS EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 8 ports with 8 removable, self powered
sym0: <1010-33> port 0xd000-0xd0ff mem 0xfebfd800-0xfebfdbff,0xfebf4000-0xfebf5fff irq 16 at device 8.0 on pci0
sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: handling phase mismatch from SCRIPTS.
sym0: [GIANT-LOCKED]
sym0: [ITHREAD]
sym1: <1010-33> port 0xe000-0xe0ff mem 0xfebfdc00-0xfebfdfff,0xfebf6000-0xfebf7fff irq 17 at device 8.1 on pci0
sym1: Symbios NVRAM, ID 7, Fast-80, SE, parity checking
sym1: open drain IRQ line driver, using on-chip SRAM
sym1: using LOAD/STORE-based firmware.
sym1: handling phase mismatch from SCRIPTS.
sym1: [GIANT-LOCKED]
sym1: [ITHREAD]
pci0: <multimedia, audio> at device 9.0 (no driver attached)
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xec00-0xec7f mem 0xfebfd400-0xfebfd47f irq 19 at device 11.0 on pci0
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> PHY 24 on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:10:5a:9c:41:8a
xl0: [ITHREAD]
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A, console
sio0: [FILTER]
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcf7ff,0xcf800-0xcffff pnpid ORM0000 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
Waiting 5 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
(noperiph:sym1:0:-1:-1): SCSI BUS reset delivered.
md0: Preloaded image </mfsroot> 4423680 bytes at 0xc0d7532c
ad0: 152627MB <WDC WD1600JB-00GVA0 08.02D08> at ata0-master UDMA100
ad1: 28629MB <QUANTUM FIREBALLlct15 30 A01.0F00> at ata0-slave UDMA66
acd0: DVDR <NEC DVD RW ND-3550A/1.Y6> at ata1-master UDMA33
acd1: CDRW <ARTEC WRR-4848 1.08/1.08> at ata1-slave UDMA33
sa0 at sym1 bus 0 target 5 lun 0
sa0: <QUANTUM DLT-V4 0A00> Removable Sequential Access SCSI-2 device
sa0: 3.300MB/s transfers
SMP: AP CPU #1 Launched!
GEOM_LABEL: Label for provider ad0 is msdosfs/SMART BTMGR.
GEOM_LABEL: Label for provider ad0s5 is ext2fs//.
GEOM_LABEL: Label for provider ad0s7 is ext2fs//var.
GEOM_LABEL: Label for provider ad0s8 is ext2fs//usr.
GEOM_LABEL: Label for provider ad0s9 is ext2fs//home.
GEOM_LABEL: Label for provider ad0s10 is ext2fs//usr/pub.


Fatal trap 12: page fault while in kernel mode
cpuid = 1; apic id = 01
fault virtual address   = 0x0
fault code              = supervisor write, page not present
instruction pointer     = 0x20:0xc06e850c
stack pointer           = 0x28:0xe409594c
frame pointer           = 0x28:0xe409597c
code segment            = base 0x0, limit 0xfffff, type 0x1b
                        = DPL 0, pres 1, def32 1, gran 1
processor eflags        = interrupt enabled, resume, IOPL = 0
current process         = 1 (swapper)
trap number             = 12
panic: page fault
cpuid = 1
Uptime: 15s
Cannot dump. No dump device defined.
Automatic reboot in 15 seconds - press a key on the console to abort
--> Press a key on the console to reboot,
--> or switch off the system now.
Rebooting...
cpu_reset: Stopping other CPUs


More information about the freebsd-stable mailing list