bce(4) and rx errors
dudu at dudu.ro
Wed Dec 10 06:59:27 PST 2008
Hello. Sorry for crossposting, but I wasn't sure which mailing list
was the most appropriate for this email.
I have an application pulling about 220Kpps from a bce(4) card
(details below). At what seems to be random times, errors start
showing up on that interface (I'm watching it with netstat -w1 -I), so
about 10% of the initial 220Kpps is reported as errors. Bringing the
interface down and then back up clears the errors, but they do
reappear at a later time. Before they reappear, the systems manages to
pull the full 220Kpps as before.
This is a temporary setup, we'll very soon use an Intel fiber card,
but I thought this issue was worth mentioning, as I don't think it's a
hardware problem (the switch also reports no errors).
The system is running a fresh (yesterday's) RELENG_7. The card is
onboard, on a HP DL380 G5. Here's the pciconf output:
-- cut here --
pcib13 at pci0:2:0:0: class=0x060400 card=0x00000000 chip=0x01031166
vendor = 'ServerWorks (Was: Reliance Computer Corp)'
device = 'BCM5715 Broadcom dual gigabit, pci bridge'
class = bridge
subclass = PCI-PCI
bce0 at pci0:3:0:0: class=0x020000 card=0x7038103c chip=0x164c14e4
vendor = 'Broadcom Corporation'
device = '5708C Broadcom NetXtreme II Gigabit Ethernet Adapter'
class = network
subclass = ethernet
-- and here --
~/.signature: no such file or directory
More information about the freebsd-stable