[SiS180] SATA drives are not detected on >= 6.0
Yuri Pankov
yuri.pankov at gmail.com
Mon Nov 12 09:18:07 PST 2007
Hi,
SATA drives on SiS 180 SATA150 (ASUS P4S800D mobo) controller are not detected
on any release > 6.0, though they work on 5.5. I've attached dmesg from 5.5
and 7.0-BETA2 in case it may be helpful. It's kinda production system, so I
couldn't play much with it. Any suggestions, hints on how to make system
recognize drives are very appreciated.
TIA,
Yuri
-------------- next part --------------
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.5-SECURITY #0: Thu Apr 26 11:43:48 UTC 2007
root at builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a46000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a4621c.
Calibrating clock(s) ... i8254 clock: 1193254 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2400690582 Hz
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2400.69-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf41 Stepping = 1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 536018944 (511 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x000000001f602fff, 513662976 bytes (125406 pages)
avail memory = 514846720 (490 MB)
Table 'FACP' at 0x1ff30290
Table 'APIC' at 0x1ff30390
MADT: Found table at 0x1ff30390
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
MADT: Found CPU APIC ID 129 ACPI ID 2: disabled
ACPI APIC Table: <A M I OEMAPIC >
bios32: Found BIOS32 Service Directory header at 0xc00f0000
bios32: Entry = 0xf0010 (c00f0010) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x31
pnpbios: Found PnP BIOS data at 0xc00f68d0
pnpbios: Entry = f0000:74ca Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 1
MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 1
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
ioapic0 <Version 1.1> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x01000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <A M I OEMXSDT> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x800010c8
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=06551039)
pcibios: BIOS version 2.10
Found $PIR table, 10 entries at 0xc00f67a0
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 2 A 0x41 3 4 5 7 10 11 12 14 15
embedded 0 2 B 0x42 3 4 5 7 10 11 12 14 15
embedded 0 2 C 0x43 3 4 5 7 10 11 12 14 15
embedded 0 2 D 0x44 3 4 5 7 10 11 12 14 15
embedded 0 3 A 0x60 3 4 5 7 10 11 12 14 15
embedded 0 3 B 0x61 3 4 5 7 10 11 12 14 15
embedded 0 3 C 0x62 3 4 5 7 10 11 12 14 15
embedded 0 3 D 0x63 3 4 5 7 10 11 12 14 15
embedded 0 5 A 0x42 3 4 5 7 10 11 12 14 15
embedded 0 1 A 0x41 3 4 5 7 10 11 12 14 15
embedded 0 1 B 0x42 3 4 5 7 10 11 12 14 15
embedded 0 1 C 0x43 3 4 5 7 10 11 12 14 15
embedded 0 1 D 0x44 3 4 5 7 10 11 12 14 15
embedded 0 4 A 0x44 3 4 5 7 10 11 12 14 15
slot 1 0 8 A 0x41 3 4 5 7 10 11 12 14 15
slot 1 0 8 B 0x42 3 4 5 7 10 11 12 14 15
slot 1 0 8 C 0x43 3 4 5 7 10 11 12 14 15
slot 1 0 8 D 0x44 3 4 5 7 10 11 12 14 15
slot 2 0 9 A 0x42 3 4 5 7 10 11 12 14 15
slot 2 0 9 B 0x43 3 4 5 7 10 11 12 14 15
slot 2 0 9 C 0x44 3 4 5 7 10 11 12 14 15
slot 2 0 9 D 0x41 3 4 5 7 10 11 12 14 15
slot 3 0 10 A 0x43 3 4 5 7 10 11 12 14 15
slot 3 0 10 B 0x44 3 4 5 7 10 11 12 14 15
slot 3 0 10 C 0x41 3 4 5 7 10 11 12 14 15
slot 3 0 10 D 0x42 3 4 5 7 10 11 12 14 15
slot 4 0 11 A 0x44 3 4 5 7 10 11 12 14 15
slot 4 0 11 B 0x41 3 4 5 7 10 11 12 14 15
slot 4 0 11 C 0x42 3 4 5 7 10 11 12 14 15
slot 4 0 11 D 0x43 3 4 5 7 10 11 12 14 15
slot 5 0 12 A 0x41 3 4 5 7 10 11 12 14 15
slot 5 0 12 B 0x42 3 4 5 7 10 11 12 14 15
slot 5 0 12 C 0x43 3 4 5 7 10 11 12 14 15
slot 5 0 12 D 0x44 3 4 5 7 10 11 12 14 15
AcpiOsDerivePciId: bus 0 dev 2 func 0
AcpiOsDerivePciId: bus 0 dev 2 func 0
acpi0: Power Button (fixed)
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x810
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI PCI link initial configuration:
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 1, range 32, base fc000000, size 25, enabled
found-> vendor=0x1039, dev=0x0655, revid=0x50
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1039, dev=0x0003, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0106, statreg=0x0020, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1039, dev=0x0964, revid=0x36
bus=0, slot=2, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000ffa0, size 4, enabled
found-> vendor=0x1039, dev=0x5513, revid=0x01
bus=0, slot=2, func=5
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000e800, size 8, enabled
map[14]: type 1, range 32, base f7fef000, size 12, enabled
pcib0: matched entry for 0.4.INTA
pcib0: slot 4 INTA hardwired to IRQ 19
found-> vendor=0x1039, dev=0x0900, revid=0x91
bus=0, slot=4, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x34 (13000 ns), maxlat=0x0b (2750 ns)
intpin=a, irq=19
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000eff0, size 3, enabled
map[14]: type 4, range 32, base 0000efe4, size 2, enabled
map[18]: type 4, range 32, base 0000efa8, size 3, enabled
map[1c]: type 4, range 32, base 0000efe0, size 2, enabled
map[20]: type 4, range 32, base 0000ef90, size 4, enabled
pcib0: matched entry for 0.5.INTA
pcib0: slot 5 INTA hardwired to IRQ 17
found-> vendor=0x1039, dev=0x0180, revid=0x01
bus=0, slot=5, func=0
class=01-04-85, hdrtype=0x00, mfdev=0
cmdreg=0x0405, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=17
map[10]: type 4, range 32, base 0000ef00, size 6, enabled
pcib0: matched entry for 0.8.INTA
pcib0: slot 8 INTA hardwired to IRQ 16
found-> vendor=0x10b7, dev=0x9050, revid=0x00
bus=0, slot=8, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=16
map[10]: type 1, range 32, base f8000000, size 26, enabled
found-> vendor=0x5333, dev=0x8811, revid=0x54
bus=0, slot=12, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
agp0: <SiS 655 host to AGP bridge> mem 0xfc000000-0xfdffffff at device 0.0 on pci0
agp0: Reserved 0x2000000 bytes for rid 0x10 type 3 at 0xfc000000
agp0: allocating GATT for aperture of size 32M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x0-0x0
pcib1: memory decode 0xfff00000-0xfffff
pcib1: prefetched decode 0xfff00000-0xfffff
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P1 - AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <SiS 964 UDMA133 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 2.5 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=00 ostat1=50
ata0-master: stat=0x00 err=0x00 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=00 stat1=00 devices=0x8<ATAPI_SLAVE>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=00 ostat1=00
ata1-master: stat=0x00 err=0x00 lsb=0x00 msb=0x00
ata1-slave: stat=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=00 devices=0x0
ata1: [MPSAFE]
sis0: <SiS 900 10/100BaseTX> port 0xe800-0xe8ff mem 0xf7fef000-0xf7feffff irq 19 at device 4.0 on pci0
sis0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe800
miibus0: <MII bus> on sis0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: bpf attached
sis0: Ethernet address: 00:11:2f:e3:0f:21
sis0: [MPSAFE]
atapci1: <SiS 964 SATA150 controller> port 0xef90-0xef9f,0xefe0-0xefe3,0xefa8-0xefaf,0xefe4-0xefe7,0xeff0-0xeff7 irq 17 at device 5.0 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xef90
atapci1: [MPSAFE]
ata2: channel #0 on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xeff0
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xefe4
ata2: reset tp1 mask=03 ostat0=50 ostat1=00
ata2-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata2-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata3: channel #1 on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xefa8
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xefe0
ata3: reset tp1 mask=03 ostat0=50 ostat1=00
ata3-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata3-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata3: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata3: [MPSAFE]
xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xef00-0xef3f irq 16 at device 8.0 on pci0
xl0: Reserved 0x40 bytes for rid 0x10 type 4 at 0xef00
xl0: using port I/O
xl0: media options word: e040
xl0: found MII/AUTO
miibus1: <MII bus> on xl0
nsphy0: <DP83840 10/100 media interface> on miibus1
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: bpf attached
xl0: Ethernet address: 00:10:4b:2f:e7:de
xl0: [MPSAFE]
pci0: <display, VGA> at device 12.0 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0045
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc8000-0xcbfff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 2400690582 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
ata0-slave: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin
ata0-slave: setting PIO4 on SiS 964 chip
acd0: <HL-DT-ST CD-ROM GCR-8520B/1.00> CDROM drive at ata0 as slave
acd0: read 8937KB/s (8937KB/s), 128KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked, lock protected
acd0: Medium: CD-ROM 120mm data disc
ata2-master: pio=0x0c wdma=0x22 udma=0x46 cable=40pin
ad4: <ST380817AS/3.42> ATA-6 disk at ata2-master
ad4: 76319MB (156301488 sectors), 155061 C, 16 H, 63 S, 512 B
ad4: 16 secs/int, 1 depth queue, SATA150
ata3-master: pio=0x0c wdma=0x22 udma=0x46 cable=40pin
ad6: <ST380817AS/3.42> ATA-6 disk at ata3-master
ad6: 76319MB (156301488 sectors), 155061 C, 16 H, 63 S, 512 B
ad6: 16 secs/int, 1 depth queue, SATA150
lun 0
magic_0 0x00000000
magic_1 0x00000000
flags 0x30104 30104<READY,SPAN>
total_disks 2
generation 1
width 1
heads 255
sectors 63
cylinders 9729
total_sectors 156301425
interleave -2147483648
reserved 63
offset 0
disk 0: flags = 0x0b b<ONLINE,ASSIGNED,PRESENT>
ad4
sectors 156301425
disk 1: flags = 0x0b b<ONLINE,ASSIGNED,PRESENT>
ad6
sectors 156301425
ar0: 76319MB <ATA RAID1 array> [9729/255/63] status: READY subdisks:
disk0 READY on ad4 at ata2-master
disk1 READY on ad6 at ata3-master
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 3 (ISA IRQ 3) to cluster 0
ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
ioapic0: routing intpin 8 (ISA IRQ 8) to cluster 0
ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0
ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 16 (PCI IRQ 16) to cluster 0
ioapic0: routing intpin 17 (PCI IRQ 17) to cluster 0
ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0
GEOM: new disk ad4
GEOM: new disk ad6
GEOM: new disk ar0
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:156296322
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad4s1, start 32256 length 80023716864 end 80023749119
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:156296322
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad6s1, start 32256 length 80023716864 end 80023749119
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:156296322
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ar0s1, start 32256 length 80023716864 end 80023749119
GEOM: Configure ad4s1a, start 0 length 268435456 end 268435455
GEOM: Configure ad4s1b, start 268435456 length 1045766144 end 1314201599
GEOM: Configure ad4s1c, start 0 length 80023716864 end 80023716863
GEOM: Configure ad4s1d, start 1314201600 length 268435456 end 1582637055
GEOM: Configure ad4s1e, start 1582637056 length 268435456 end 1851072511
GEOM: Configure ad4s1f, start 1851072512 length 78172644352 end 80023716863
GEOM: Configure ad6s1a, start 0 length 268435456 end 268435455
GEOM: Configure ad6s1b, start 268435456 length 1045766144 end 1314201599
GEOM: Configure ad6s1c, start 0 length 80023716864 end 80023716863
GEOM: Configure ad6s1d, start 1314201600 length 268435456 end 1582637055
GEOM: Configure ad6s1e, start 1582637056 length 268435456 end 1851072511
GEOM: Configure ad6s1f, start 1851072512 length 78172644352 end 80023716863
GEOM: Configure ar0s1a, start 0 length 268435456 end 268435455
GEOM: Configure ar0s1b, start 268435456 length 1045766144 end 1314201599
GEOM: Configure ar0s1c, start 0 length 80023716864 end 80023716863
GEOM: Configure ar0s1d, start 1314201600 length 268435456 end 1582637055
GEOM: Configure ar0s1e, start 1582637056 length 268435456 end 1851072511
GEOM: Configure ar0s1f, start 1851072512 length 78172644352 end 80023716863
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
Mounting root from ufs:/dev/ar0s1a
start_init: trying /sbin/init
warning: KLD '/boot/kernel/kernel' is newer than the linker.hints file
-------------- next part --------------
SMAP type=01 base=0000000000000000 len=000000000009fc00
SMAP type=02 base=000000000009fc00 len=0000000000000400
SMAP type=02 base=00000000000e8000 len=0000000000018000
SMAP type=01 base=0000000000100000 len=000000001fe30000
SMAP type=03 base=000000001ff30000 len=0000000000010000
SMAP type=04 base=000000001ff40000 len=00000000000b0000
SMAP type=02 base=000000001fff0000 len=0000000000010000
SMAP type=02 base=00000000ff7c0000 len=0000000000840000
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-BETA2 #0: Fri Nov  2 16:47:33 UTC 2007
  root at logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc116e000.
Preloaded mfs_root "/boot/mfsroot" at 0xc116e184.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc116e1c8.
Calibrating clock(s) ... i8254 clock: 1193252 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2400697440 Hz
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2400.70-MHz 686-class CPU)
 Origin = "GenuineIntel"  Id = 0xf41  Stepping = 1
 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
 Features2=0x441d<SSE3,RSVD2,MON,DS_CPL,CNXT-ID,xTPR>
Instruction TLB: 4 KB, 2 MB or 4 MB pages, fully associative, 128 entries
Data TLB: 4 KB or 4 MB pages, fully associative, 64 entries
1st-level data cache: 16 KB, 8-way set associative, sectored cache, 64 byte line size
Trace cache: 12K-uops, 8-way set associative
2nd-level cache: 1 MB, 8-way set associative, sectored cache, 64 byte line size
L2 cache: 1024 kbytes, 8-way associative, 64 bytes/line
real memory  = 536018944 (511 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001428000 - 0x000000001f5eefff, 505180160 bytes (123335 pages)
avail memory = 506421248 (482 MB)
Table 'FACP' at 0x1ff30290
Table 'APIC' at 0x1ff30390
MADT: Found table at 0x1ff30390
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 129 ACPI ID 2: disabled
ACPI APIC Table: <A M I Â OEMAPIC >
bios32: Found BIOS32 Service Directory header at 0xc00f0000
bios32: Entry = 0xf0010 (c00f0010) Â Rev = 0 Â Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x31
pnpbios: Found PnP BIOS data at 0xc00f68d0
pnpbios: Entry = f0000:74ca  Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 1
ACPI: RSDP @ 0x0xfb250/0x0021 (v  2 ACPIAM)
ACPI: XSDT @ 0x0x1ff30100/0x003C (v  1 A M I  OEMXSDT  0x09000417 MSFT 0x00000097)
ACPI: FACP @ 0x0x1ff30290/0x00F4 (v  3 A M I  OEMFACP  0x09000417 MSFT 0x00000097)
ACPI: DSDT @ 0x0x1ff303f0/0x3478 (v  1  100XX 100XX001 0x00000001 INTL 0x02002026)
ACPI: FACS @ 0x0x1ff40000/0x0040
ACPI: APIC @ 0x0x1ff30390/0x005C (v  1 A M I  OEMAPIC  0x09000417 MSFT 0x00000097)
ACPI: OEMB @ 0x0x1ff40040/0x0040 (v  1 A M I  AMI_OEM  0x09000417 MSFT 0x00000097)
MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 1
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
ioapic0 <Version 1.1> irqs 0-23 on motherboard
cpu0 BSP:
   ID: 0x00000000  VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
 lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
 timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010000
wlan: <802.11 Link Layer>
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
wlan_amrr: <AMRR Transmit Rate Control Algorithm>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
rr232x: RocketRAID 232x controller driver v1.02 (Nov  2 2007 16:47:11)
npx0: INT 16 interface
acpi0: <A M I OEMXSDT> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xcd2c7000 pa 0x1000
pci_open(1):Â Â Â Â mode 1 addr port (0x0cf8) is 0x800010c8
pci_open(1a):Â Â Â mode1res=0x80000000 (0x80000000)
pci_cfgcheck:Â Â Â device 0 [class=060000] [hdr=80] is there (id=06551039)
pcibios: BIOS version 2.10
AcpiOsDerivePciId: \_SB_.PCI0.SBRG.PIX0 -> bus 0 dev 2 func 0
AcpiOsDerivePciId: \_SB_.PCI0.SBRG.PIX1 -> bus 0 dev 2 func 0
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 1fef0000 (3) failed
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pci_link0:     Index  IRQ  Rtd  Ref  IRQs
 Initial Probe    0   5  N   0  3 4 5 7 10 11 12 14 15
 Validation      0   5  N   0  3 4 5 7 10 11 12 14 15
 After Disable    0  255  N   0  3 4 5 7 10 11 12 14 15
pci_link1:     Index  IRQ  Rtd  Ref  IRQs
 Initial Probe    0  11  N   0  3 4 5 7 10 11 12 14 15
 Validation      0  11  N   0  3 4 5 7 10 11 12 14 15
 After Disable    0  255  N   0  3 4 5 7 10 11 12 14 15
pci_link2:     Index  IRQ  Rtd  Ref  IRQs
 Initial Probe    0  255  N   0  3 4 5 7 10 11 12 14 15
 Validation      0  255  N   0  3 4 5 7 10 11 12 14 15
 After Disable    0  255  N   0  3 4 5 7 10 11 12 14 15
pci_link3:     Index  IRQ  Rtd  Ref  IRQs
 Initial Probe    0  10  N   0  3 4 5 7 10 11 12 14 15
 Validation      0  10  N   0  3 4 5 7 10 11 12 14 15
 After Disable    0  255  N   0  3 4 5 7 10 11 12 14 15
pci_link4:     Index  IRQ  Rtd  Ref  IRQs
 Initial Probe    0  255  N   0  3 4 5 7 10 11 12 14 15
 Validation      0  255  N   0  3 4 5 7 10 11 12 14 15
 After Disable    0  255  N   0  3 4 5 7 10 11 12 14 15
pci_link5:     Index  IRQ  Rtd  Ref  IRQs
 Initial Probe    0  255  N   0  3 4 5 7 10 11 12 14 15
 Validation      0  255  N   0  3 4 5 7 10 11 12 14 15
 After Disable    0  255  N   0  3 4 5 7 10 11 12 14 15
pci_link6:     Index  IRQ  Rtd  Ref  IRQs
 Initial Probe    0  255  N   0  3 4 5 7 10 11 12 14 15
 Validation      0  255  N   0  3 4 5 7 10 11 12 14 15
 After Disable    0  255  N   0  3 4 5 7 10 11 12 14 15
pci_link7:     Index  IRQ  Rtd  Ref  IRQs
 Initial Probe    0  255  N   0  3 4 5 7 10 11 12 14 15
 Validation      0  255  N   0  3 4 5 7 10 11 12 14 15
 After Disable    0  255  N   0  3 4 5 7 10 11 12 14 15
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
p4tcc0: <CPU Frequency Thermal Control> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found->Â vendor=0x1039, dev=0x0655, revid=0x50
        domain=0, bus=0, slot=0, func=0
        class=06-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0007, statreg=0x2210, cachelnsz=0 (dwords)
        lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        map[10]: type Memory, range 32, base 0xfc000000, size 25, enabled
found->Â vendor=0x1039, dev=0x0003, revid=0x00
        domain=0, bus=0, slot=1, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0106, statreg=0x0020, cachelnsz=0 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
found->Â vendor=0x1039, dev=0x0964, revid=0x36
        domain=0, bus=0, slot=2, func=0
        class=06-01-00, hdrtype=0x00, mfdev=1
        cmdreg=0x000f, statreg=0x0200, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->Â vendor=0x1039, dev=0x5513, revid=0x01
        domain=0, bus=0, slot=2, func=5
        class=01-01-8a, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x0210, cachelnsz=0 (dwords)
        lattimer=0x80 (3840 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=255
        powerspec 2  supports D0 D3  current D0
        map[20]: type I/O Port, range 32, base 0xffa0, size  4, enabled
found->Â vendor=0x1039, dev=0x0900, revid=0x91
        domain=0, bus=0, slot=4, func=0
        class=02-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0107, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x34 (13000 ns), maxlat=0x0b (2750 ns)
        intpin=a, irq=10
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type I/O Port, range 32, base 0xe800, size  8, enabled
        map[14]: type Memory, range 32, base 0xf7fef000, size 12, enabled
pcib0: matched entry for 0.4.INTA
pcib0: slot 4 INTA hardwired to IRQ 19
found->Â vendor=0x1039, dev=0x0180, revid=0x01
        domain=0, bus=0, slot=5, func=0
        class=01-04-85, hdrtype=0x00, mfdev=0
        cmdreg=0x0405, statreg=0x0220, cachelnsz=0 (dwords)
        lattimer=0x80 (3840 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=11
        map[10]: type I/O Port, range 32, base 0xeff0, size  3, enabled
        map[14]: type I/O Port, range 32, base 0xefe4, size  2, enabled
        map[18]: type I/O Port, range 32, base 0xefa8, size  3, enabled
        map[1c]: type I/O Port, range 32, base 0xefe0, size  2, enabled
        map[20]: type I/O Port, range 32, base 0xef90, size  4, enabled
pcib0: matched entry for 0.5.INTA
pcib0: slot 5 INTA hardwired to IRQ 17
found->Â vendor=0x10b7, dev=0x9050, revid=0x00
        domain=0, bus=0, slot=8, func=0
        class=02-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0107, statreg=0x0200, cachelnsz=0 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns)
        intpin=a, irq=5
        map[10]: type I/O Port, range 32, base 0xef00, size  6, enabled
pcib0: matched entry for 0.8.INTA
pcib0: slot 8 INTA hardwired to IRQ 16
found->Â vendor=0x5333, dev=0x8811, revid=0x54
        domain=0, bus=0, slot=12, func=0
        class=03-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0003, statreg=0x0200, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=255
        map[10]: type Memory, range 32, base 0xf8000000, size 26, enabled
agp0: <SiS 655 host to AGP bridge> on hostb0
hostb0: Reserved 0x2000000 bytes for rid 0x10 type 3 at 0xfc000000
agp0: allocating GATT for aperture of size 32M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1:  domain       0
pcib1:  secondary bus   1
pcib1:  subordinate bus  1
pcib1:  I/O decode     0x0-0x0
pcib1: Â no prefetched decode
pcib1: could not get PCI interrupt routing table for \_SB_.PCI0.P0P1 - AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <SiS 964 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 2.5 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=00 ostat1=50
ata0: stat0=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=00 stat1=00 devices=0x8<ATAPI_SLAVE>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 49
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=00 ostat1=00
ata1: stat0=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=00 devices=0x0
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 50
ata1: [MPSAFE]
ata1: [ITHREAD]
sis0: <SiS 900 10/100BaseTX> port 0xe800-0xe8ff mem 0xf7fef000-0xf7feffff irq 19 at device 4.0 on pci0
sis0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe800
miibus0: <MII bus> on sis0
rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0
rlphy0: Â 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: bpf attached
sis0: Ethernet address: 00:11:2f:e3:0f:21
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 51
sis0: [MPSAFE]
sis0: [ITHREAD]
atapci1: <SiS 180 SATA150 controller> port 0xeff0-0xeff7,0xefe4-0xefe7,0xefa8-0xefaf,0xefe0-0xefe3,0xef90-0xef9f irq 17 at device 5.0 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xef90
ioapic0: routing intpin 17 (PCI IRQ 17) to vector 52
atapci1: [MPSAFE]
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xeff0
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xefe4
ata2: reset tp1 mask=03 ostat0=50 ostat1=00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xefa8
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xefe0
ata3: reset tp1 mask=03 ostat0=50 ostat1=00
ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata3: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata3: [MPSAFE]
ata3: [ITHREAD]
xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xef00-0xef3f irq 16 at device 8.0 on pci0
xl0: Reserved 0x40 bytes for rid 0x10 type 4 at 0xef00
xl0: using port I/O
xl0: media options word: e040
xl0: found MII/AUTO
miibus1: <MII bus> on xl0
nsphy0: <DP83840 10/100 media interface> PHY 24 on miibus1
nsphy0: Â 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: bpf attached
xl0: Ethernet address: 00:10:4b:2f:e7:de
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 53
xl0: [MPSAFE]
xl0: [ITHREAD]
vgapci0: <VGA-compatible display> mem 0xf8000000-0xfbffffff at device 12.0 on pci0
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0045
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 54
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
sio0: irq maps: 0xc21 0xc31 0xc21 0xc21
sio0: irq maps: 0xc21 0xc31 0xc21 0xc21
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A, console
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 55
sio0: [FILTER]
sio1: irq maps: 0xc21 0xc29 0xc21 0xc21
sio1: irq maps: 0xc21 0xc29 0xc21 0xc21
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ioapic0: routing intpin 3 (ISA IRQ 3) to vector 56
sio1: [FILTER]
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ex_isa_identify()
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff pnpid ORM0000 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 66686028 hz
Timecounter "TSC" frequency 2400697440 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
rr232x: no controller detected.
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc0ccaf5c
ata0-slave: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire
acd0: setting PIO4 on 964 chip
acd0: <HL-DT-ST CD-ROM GCR-8520B/1.00> CDROM drive at ata0 as slave
acd0: read 8937KB/s (8937KB/s), 128KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked, lock protected
acd0: Medium: CD-ROM 120mm data disc
GEOM_LABEL: Label for provider acd0 is iso9660/FreeBSD_bootonly.
ata2: reiniting channel ..
ata2: reset tp1 mask=03 ostat0=58 ostat1=58
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata2: reinit done ..
ata2: reiniting channel ..
ata2: reset tp1 mask=03 ostat0=58 ostat1=58
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata2: reinit done ..
ata3: reiniting channel ..
ata3: reset tp1 mask=03 ostat0=58 ostat1=58
ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata3: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata3: reinit done ..
ata3: reiniting channel ..
ata3: reset tp1 mask=03 ostat0=58 ostat1=58
ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata3: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata3: reinit done ..
ATA PseudoRAID loaded
Trying to mount root from ufs:/dev/md0
start_init: trying /sbin/init
start_init: trying /sbin/oinit
start_init: trying /sbin/init.bak
start_init: trying /rescue/init
start_init: trying /stand/sysinstall
More information about the freebsd-stable
mailing list