bge watchdog timeout -- resetting problem on recent update
Jason Chang
jason at FreeBSD.csie.nctu.edu.tw
Tue May 1 09:59:30 UTC 2007
Dear All,
After further testing, we concluded that
1. sysctl
hw.pci.enable_msi
hw.pci.enable_msix
does not change the result. bge still timeout.
2. using latest(2007/04) 7-current source does not have this problem.
3. we are very sure the problem results from
if_bge.c 1.91.2.21
if_bgereg.h 1.36.2.10
brgphy.c 1.34.2.13
which are all commited at 2007/03/21 22:53
Please help to check the source code and find out why it affects
bge (BCM 5704 and 5714) network nics.
Thanks very much.
Sincerely,
Jason Chang
您在 <f0504h$b9q$1 at FreeBSD.csie.nctu.edu.tw> 文章內提到:
>
> Dear All,
>
> After recent cvsup and make world, my server suffered from the
> bge watchdog timeout -- resetting problem. Manually revert the
> bge related source to older version and compiled a new kernel
> may solve the problem. So I guess the recent committed source
> does not go well with bge nics onboard of IBM e326m servers.
>
> 1. server model
> IBM e326m server with dual AMD opteron cpus
> http://www-304.ibm.com/jct01004c/systems/support/supportsite.wss/docdisplay?brandind=5000008&lndocid=MIGR-61692
> bge chipset is Broadcom BCM5714 B3, ASIC rev. 0x8003
>
> 2. senario
> large network i/o results in error:
> bge0: watchdog timeout -- resetting
> bge0: link DOWN
> bge0: link state changed to DOWN
> bge0: link UP
> bge0: link state changed to UP
>
> 3. how to reproduce
> just ftp a file larger then 20mb, and the bge will have trouble in 30sec.
>
> 4. source version verified to work abnormally.
> if_bge.c 1.91.2.22
> if_bgereg.h 1.36.2.10
> brgphy.c 1.34.2.13
>
> 5. source version verified to work normally.
> if_bge.c 1.91.2.19
> if_bgereg.h 1.36.2.9
> brgphy.c 1.34.2.12
>
> 6. system dmesg:
>
> Copyright (c) 1992-2007 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 6.2-STABLE #13: Sat Apr 14 10:57:10 CST 2007
> root at ccsun52.cc.ntu.edu.tw:/usr/src/sys/amd64/compile/CCSUN52
> Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff8061a000.
> INTR: Adding local APIC 0 as a target
> ACPI APIC Table: <AMD BLAST >
> Calibrating clock(s) ... i8254 clock: 1193293 Hz
> CLK_USE_I8254_CALIBRATION not specified - using default frequency
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Calibrating TSC clock ... TSC clock: 2793019707 Hz
> CPU: AMD Opteron(tm) Processor 254 (2793.02-MHz K8-class CPU)
> Origin = "AuthenticAMD" Id = 0x20f51 Stepping = 1
> Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CM
> OV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
> Features2=0x1<SSE3>
> AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!>
> AMD Features2=0x1<LAHF>
> L1 2MB data TLB: 8 entries, fully associative
> L1 2MB instruction TLB: 8 entries, fully associative
> L1 4KB data TLB: 32 entries, fully associative
> L1 4KB instruction TLB: 32 entries, fully associative
> L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
> L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
> L2 2MB unified TLB: 0 entries, disabled/not present
> L2 4KB data TLB: 512 entries, 4-way associative
> L2 4KB instruction TLB: 512 entries, 4-way associative
> L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
> real memory = 2146828288 (2047 MB)
> Physical memory chunk(s):
> 0x0000000000001000 - 0x0000000000096fff, 614400 bytes (150 pages)
> 0x0000000000717000 - 0x000000007c2fcfff, 2076073984 bytes (506854 pages)
> avail memory = 2066284544 (1970 MB)
> INTR: Adding local APIC 1 as a target
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> cpu0 (BSP): APIC ID: 0
> cpu1 (AP): APIC ID: 1
> APIC: CPU 0 has ACPI ID 0
> APIC: CPU 1 has ACPI ID 1
> MADT: Found IO APIC ID 4, Interrupt 0 at 0xfec00000
> ioapic0: Routing external 8259A's -> intpin 0
> MADT: Found IO APIC ID 5, Interrupt 16 at 0xfec01000
> MADT: Found IO APIC ID 6, Interrupt 32 at 0xfec02000
> MADT: Interrupt override: source 0, irq 2
> ioapic0: Routing IRQ 0 -> intpin 2
> lapic0: Routing NMI -> LINT1
> lapic0: LINT1 trigger: edge
> lapic0: LINT1 polarity: high
> lapic1: Routing NMI -> LINT1
> lapic1: LINT1 trigger: edge
> lapic1: LINT1 polarity: high
> MADT: Forcing active-low polarity and level trigger for SCI
> ioapic0: intpin 9 polarity: low
> ioapic0: intpin 9 trigger: level
> ioapic0 <Version 1.1> irqs 0-15 on motherboard
> ioapic1 <Version 1.1> irqs 16-31 on motherboard
> ioapic2 <Version 1.1> irqs 32-47 on motherboard
> cpu0 BSP:
> ID: 0x00000000 VER: 0x00040010 LDR: 0x00000000 DFR: 0xffffffff
> lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
> timer: 0x000100ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
> null: <null device, zero device>
> random: <entropy source, Software, Yarrow>
> mem: <memory>
> ichwd module loaded
> io: <I/O>
> acpi0: <AMD XSDT> on motherboard
> ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
> acpi0: [MPSAFE]
> acpi0: Power Button (fixed)
> pci_open(1): mode 1 addr port (0x0cf8) is 0x80016844
> pci_open(1a): mode1res=0x80000000 (0x80000000)
> pci_cfgcheck: device 0 1 [class=060400] [hdr=01] is there (id=00361166)
> AcpiOsDerivePciId: bus 0 dev 24 func 1
> unknown: I/O range not supported
> ACPI timer: 0/4 0/5 0/4 0/4 0/4 0/4 0/3 0/4 0/4 0/4 -> 0
> Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
> acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
> pci_link0: Index IRQ Rtd Ref IRQs
> Initial Probe 0 10 N 0 10 11
> Validation 0 10 N 0 10 11
> After Disable 0 255 N 0 10 11
> pci_link1: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 10 11
> Validation 0 255 N 0 10 11
> After Disable 0 255 N 0 10 11
> pci_link2: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 5 7 10 11
> Validation 0 255 N 0 5 7 10 11
> After Disable 0 255 N 0 5 7 10 11
> pci_link3: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
> Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
> After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
> pci_link4: Index IRQ Rtd Ref IRQs
> Initial Probe 0 5 N 0 3 4 5 7 10 11 12 14 15
> Validation 0 5 N 0 3 4 5 7 10 11 12 14 15
> After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
> pci_link5: Index IRQ Rtd Ref IRQs
> Initial Probe 0 11 N 0 3 4 5 7 10 11 12 14 15
> Validation 0 11 N 0 3 4 5 7 10 11 12 14 15
> After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
> pci_link6: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
> Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
> After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
> pci_link7: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 9 11
> Validation 0 255 N 0 9 11
> After Disable 0 255 N 0 9 11
> pci_link8: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 9 11
> Validation 0 255 N 0 9 11
> After Disable 0 255 N 0 9 11
> pci_link9: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
> Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
> After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
> pci_link10: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
> Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
> After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
> pci_link11: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
> Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
> After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
> pci_link12: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
> Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
> After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
> pci_link13: Index IRQ Rtd Ref IRQs
> Initial Probe 0 7 N 0 3 4 5 7 10 11 12 14 15
> Validation 0 7 N 0 3 4 5 7 10 11 12 14 15
> After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
> pci_link14: Index IRQ Rtd Ref IRQs
> Initial Probe 0 10 N 0 3 4 5 7 10 11 12 14 15
> Validation 0 10 N 0 3 4 5 7 10 11 12 14 15
> After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
> pci_link15: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
> Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
> After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
> pci_link16: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
> Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
> After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
> pci_link17: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
> Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
> After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
> pci_link18: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
> Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
> After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
> pci_link19: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
> Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
> After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
> pci_link20: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
> Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
> After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
> pci_link21: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
> Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
> After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
> pci_link22: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
> Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
> After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
> pci_link23: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
> Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
> After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
> pci_link24: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
> Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
> After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
> pci_link25: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
> Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
> After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
> pci_link26: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
> Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
> After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
> pci_link27: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
> Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
> After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
> pci_link28: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
> Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
> After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
> pci_link29: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
> Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
> After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
> pci_link30: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
> Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
> After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
> pci_link31: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
> Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
> After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
> pci_link32: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
> Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
> After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
> pci_link33: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
> Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
> After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
> pci_link34: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
> Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
> After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
> cpu0: <ACPI CPU> on acpi0
> cpu0: switching to generic Cx mode
> powernow0: <Cool`n'Quiet K8> on cpu0
> powernow0: STATUS: 0x4060604141414
> powernow0: STATUS: maxfid: 0x14
> powernow0: STATUS: maxvid: 0x04
> device_attach: powernow0 attach returned 6
> cpu1: <ACPI CPU> on acpi0
> powernow1: <Cool`n'Quiet K8> on cpu1
> powernow1: STATUS: 0x4060604141414
> powernow1: STATUS: maxfid: 0x14
> powernow1: STATUS: maxvid: 0x04
> device_attach: powernow1 attach returned 6
> pcib0: <ACPI Host-PCI bridge> on acpi0
> ACPI: Found matching pin for 0.3.INTA at func 0: 10
> pci0: <ACPI PCI bus> on pcib0
> pci0: physical bus=0
> found-> vendor=0x1166, dev=0x0036, revid=0x00
> bus=0, slot=1, func=0
> class=06-04-00, hdrtype=0x01, mfdev=0
> cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x1166, dev=0x0205, revid=0x00
> bus=0, slot=2, func=0
> class=06-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0147, statreg=0x0200, cachelnsz=0 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x1166, dev=0x0214, revid=0x00
> bus=0, slot=2, func=1
> class=01-01-8a, hdrtype=0x00, mfdev=1
> cmdreg=0x0155, statreg=0x0210, cachelnsz=16 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> powerspec 2 supports D0 D3 current D0
> map[20]: type 4, range 32, base 00002000, size 4, enabled
> found-> vendor=0x1166, dev=0x0234, revid=0x00
> bus=0, slot=2, func=2
> class=06-01-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0147, statreg=0x0200, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x1166, dev=0x0223, revid=0x01
> bus=0, slot=3, func=0
> class=0c-03-10, hdrtype=0x00, mfdev=1
> cmdreg=0x0157, statreg=0x02b0, cachelnsz=16 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=a, irq=10
> powerspec 2 supports D0 D3 current D0
> map[10]: type 1, range 32, base e8011000, size 12, enabled
> map[14]: type 4, range 32, base 00001000, size 8, enabled
> pcib0: matched entry for 0.3.INTA (src \\_SB_.LNKU:0)
> ioapic0: Changing trigger for pin 10 to level
> ioapic0: Changing polarity for pin 10 to low
> pcib0: slot 3 INTA routed to irq 10 via \\_SB_.LNKU
> found-> vendor=0x1166, dev=0x0223, revid=0x01
> bus=0, slot=3, func=1
> class=0c-03-10, hdrtype=0x00, mfdev=0
> cmdreg=0x0157, statreg=0x02b0, cachelnsz=16 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=a, irq=10
> powerspec 2 supports D0 D3 current D0
> map[10]: type 1, range 32, base e8012000, size 12, enabled
> map[14]: type 4, range 32, base 00001400, size 8, enabled
> pcib0: matched entry for 0.3.INTA (src \\_SB_.LNKU:0)
> pcib0: slot 3 INTA routed to irq 10 via \\_SB_.LNKU
> found-> vendor=0x1166, dev=0x0223, revid=0x01
> bus=0, slot=3, func=2
> class=0c-03-20, hdrtype=0x00, mfdev=0
> cmdreg=0x0157, statreg=0x02b0, cachelnsz=16 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=a, irq=10
> powerspec 2 supports D0 D1 D2 D3 current D0
> map[10]: type 1, range 32, base e8013000, size 12, enabled
> map[14]: type 4, range 32, base 00001800, size 8, enabled
> pcib0: matched entry for 0.3.INTA (src \\_SB_.LNKU:0)
> pcib0: slot 3 INTA routed to irq 10 via \\_SB_.LNKU
> found-> vendor=0x1002, dev=0x515e, revid=0x01
> bus=0, slot=4, func=0
> class=03-00-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0183, statreg=0x0290, cachelnsz=16 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
> intpin=a, irq=5
> powerspec 2 supports D0 D1 D2 D3 current D0
> map[10]: type 3, range 32, base f0000000, size 27, enabled
> map[14]: type 4, range 32, base 00001c00, size 8, enabled
> map[18]: type 1, range 32, base e8000000, size 16, enabled
> pcib0: matched entry for 0.4.INTA
> pcib0: slot 4 INTA hardwired to IRQ 17
> found-> vendor=0x1166, dev=0x0130, revid=0xa3
> bus=0, slot=6, func=0
> class=06-04-00, hdrtype=0x01, mfdev=0
> cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x02 (500 ns)
> found-> vendor=0x1166, dev=0x0130, revid=0xa3
> bus=0, slot=7, func=0
> class=06-04-00, hdrtype=0x01, mfdev=0
> cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x1166, dev=0x0132, revid=0xa3
> bus=0, slot=8, func=0
> class=06-04-00, hdrtype=0x01, mfdev=0
> cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x1166, dev=0x0132, revid=0xa3
> bus=0, slot=9, func=0
> class=06-04-00, hdrtype=0x01, mfdev=0
> cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x1166, dev=0x0132, revid=0xa3
> bus=0, slot=10, func=0
> class=06-04-00, hdrtype=0x01, mfdev=0
> cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x1166, dev=0x0132, revid=0xa3
> bus=0, slot=11, func=0
> class=06-04-00, hdrtype=0x01, mfdev=0
> cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x1022, dev=0x1100, revid=0x00
> bus=0, slot=24, func=0
> class=06-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x1022, dev=0x1101, revid=0x00
> bus=0, slot=24, func=1
> class=06-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x1022, dev=0x1102, revid=0x00
> bus=0, slot=24, func=2
> class=06-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x1022, dev=0x1103, revid=0x00
> bus=0, slot=24, func=3
> class=06-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x1022, dev=0x1100, revid=0x00
> bus=0, slot=25, func=0
> class=06-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x1022, dev=0x1101, revid=0x00
> bus=0, slot=25, func=1
> class=06-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x1022, dev=0x1102, revid=0x00
> bus=0, slot=25, func=2
> class=06-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x1022, dev=0x1103, revid=0x00
> bus=0, slot=25, func=3
> class=06-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
> pcib1: secondary bus 1
> pcib1: subordinate bus 2
> pcib1: I/O decode 0x3000-0x3fff
> pcib1: memory decode 0xe8100000-0xe81fffff
> pcib1: prefetched decode 0xfff00000-0xfffff
> pci1: <ACPI PCI bus> on pcib1
> pci1: physical bus=1
> found-> vendor=0x1166, dev=0x0104, revid=0xb2
> bus=1, slot=13, func=0
> class=06-04-00, hdrtype=0x01, mfdev=0
> cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x02 (500 ns)
> pcib2: <ACPI PCI-PCI bridge> at device 13.0 on pci1
> pcib2: secondary bus 2
> pcib2: subordinate bus 2
> pcib2: I/O decode 0x3000-0x3fff
> pcib2: memory decode 0xe8100000-0xe81fffff
> pcib2: prefetched decode 0xfff00000-0xfffff
> pci2: <ACPI PCI bus> on pcib2
> pci2: physical bus=2
> found-> vendor=0x1000, dev=0x0030, revid=0x08
> bus=2, slot=3, func=0
> class=01-00-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords)
> lattimer=0x48 (2160 ns), mingnt=0x11 (4250 ns), maxlat=0x12 (4500 ns)
> intpin=a, irq=11
> powerspec 2 supports D0 D1 D2 D3 current D0
> MSI supports 1 message, 64 bit
> map[10]: type 4, range 32, base 00003000, size 8, enabled
> pcib2: requested I/O range 0x3000-0x30ff: in range
> pcib1: requested I/O range 0x3000-0x30ff: in range
> map[14]: type 1, range 64, base e8120000, size 17, enabled
> pcib2: requested memory range 0xe8120000-0xe813ffff: good
> pcib1: requested memory range 0xe8120000-0xe813ffff: good
> map[1c]: type 1, range 64, base e8100000, size 17, enabled
> pcib2: requested memory range 0xe8100000-0xe811ffff: good
> pcib1: requested memory range 0xe8100000-0xe811ffff: good
> pcib2: matched entry for 2.3.INTA
> pcib2: slot 3 INTA hardwired to IRQ 18
> mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x3000-0x30ff mem 0xe8120000-0xe813fff
> f,0xe8100000-0xe811ffff irq 18 at device 3.0 on pci2
> mpt0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x3000
> mpt0: Reserved 0x20000 bytes for rid 0x14 type 3 at 0xe8120000
> ioapic1: routing intpin 2 (PCI IRQ 18) to vector 49
> mpt0: [GIANT-LOCKED]
> mpt0: MPI Version=1.2.12.0
> mpt0: Capabilities: ( RAID-1E RAID-1 SAFTE )
> mpt0: 0 Active Volumes (1 Max)
> mpt0: 0 Hidden Drive Members (6 Max)
> atapci0: <ServerWorks HT1000 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x
> 177,0x376,0x2000-0x200f at device 2.1 on pci0
> atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x2000
> ata0: <ATA channel 0> on atapci0
> atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
> atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
> ata0: reset tp1 mask=03 ostat0=50 ostat1=00
> ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
> ata0: stat1=0x00 err=0x04 lsb=0x00 msb=0x00
> ata0: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
> ioapic0: routing intpin 14 (ISA IRQ 14) to vector 50
> ata0: [MPSAFE]
> ata1: <ATA channel 1> on atapci0
> atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
> atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
> ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
> ioapic0: routing intpin 15 (ISA IRQ 15) to vector 51
> ata1: [MPSAFE]
> isab0: <PCI-ISA bridge> at device 2.2 on pci0
> isa0: <ISA bus> on isab0
> ohci0: <OHCI (generic) USB controller> port 0x1000-0x10ff mem 0xe8011000-0xe8011
> fff irq 10 at device 3.0 on pci0
> ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe8011000
> ohci0: (New OHCI DeviceId=0x02231166)
> ioapic0: routing intpin 10 (ISA IRQ 10) to vector 52
> ohci0: [GIANT-LOCKED]
> usb0: OHCI version 1.0, legacy support
> usb0: SMM does not respond, resetting
> usb0: <OHCI (generic) USB controller> on ohci0
> usb0: USB revision 1.0
> uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> ohci1: <OHCI (generic) USB controller> port 0x1400-0x14ff mem 0xe8012000-0xe8012
> fff irq 10 at device 3.1 on pci0
> ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe8012000
> ohci1: (New OHCI DeviceId=0x02231166)
> ohci1: [GIANT-LOCKED]
> usb1: OHCI version 1.0, legacy support
> usb1: SMM does not respond, resetting
> usb1: <OHCI (generic) USB controller> on ohci1
> usb1: USB revision 1.0
> uhub1: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> ehci0: <EHCI (generic) USB 2.0 controller> port 0x1800-0x18ff mem 0xe8013000-0xe
> 8013fff irq 10 at device 3.2 on pci0
> ehci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe8013000
> ehci0: (New EHCI DeviceId=0x02231166)
> ehci0: [GIANT-LOCKED]
> usb2: EHCI version 1.0
> usb2: companion controllers, 2 ports each: usb0 usb1
> usb2: <EHCI (generic) USB 2.0 controller> on ehci0
> usb2: USB revision 2.0
> uhub2: (0x1166) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub2: 4 ports with 4 removable, self powered
> pci0: <display, VGA> at device 4.0 (no driver attached)
> pcib3: <ACPI PCI-PCI bridge> at device 6.0 on pci0
> pcib3: secondary bus 3
> pcib3: subordinate bus 3
> pcib3: I/O decode 0xf000-0xfff
> pcib3: memory decode 0xfff00000-0xfffff
> pcib3: prefetched decode 0xfff00000-0xfffff
> pci3: <ACPI PCI bus> on pcib3
> pci3: physical bus=3
> pcib4: <ACPI PCI-PCI bridge> at device 7.0 on pci0
> pcib4: secondary bus 4
> pcib4: subordinate bus 4
> pcib4: I/O decode 0xf000-0xfff
> pcib4: memory decode 0xe8200000-0xe82fffff
> pcib4: prefetched decode 0xfff00000-0xfffff
> pci4: <ACPI PCI bus> on pcib4
> pci4: physical bus=4
> found-> vendor=0x14e4, dev=0x166a, revid=0x03
> bus=4, slot=4, func=0
> class=02-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
> intpin=a, irq=7
> powerspec 2 supports D0 D3 current D0
> MSI supports 8 messages, 64 bit
> map[10]: type 1, range 64, base e8210000, size 16, enabled
> pcib4: requested memory range 0xe8210000-0xe821ffff: good
> map[18]: type 1, range 64, base e8200000, size 16, enabled
> pcib4: requested memory range 0xe8200000-0xe820ffff: good
> pcib4: matched entry for 4.4.INTA
> pcib4: slot 4 INTA hardwired to IRQ 26
> found-> vendor=0x14e4, dev=0x166a, revid=0x03
> bus=4, slot=4, func=1
> class=02-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
> intpin=b, irq=10
> powerspec 2 supports D0 D3 current D0
> MSI supports 8 messages, 64 bit
> map[10]: type 1, range 64, base e8230000, size 16, enabled
> pcib4: requested memory range 0xe8230000-0xe823ffff: good
> map[18]: type 1, range 64, base e8220000, size 16, enabled
> pcib4: requested memory range 0xe8220000-0xe822ffff: good
> pcib4: matched entry for 4.4.INTB
> pcib4: slot 4 INTB hardwired to IRQ 27
> bge0: <Broadcom BCM5714 B3, ASIC rev. 0x8003> mem 0xe8210000-0xe821ffff,0xe82000
> 00-0xe820ffff irq 26 at device 4.0 on pci4
> bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xe8210000
> miibus0: <MII bus> on bge0
> brgphy0: <BCM5780 10/100/1000baseTX PHY> on miibus0
> brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX
> -FDX, auto
> bge0: bpf attached
> bge0: Ethernet address: 00:11:25:c4:1d:62
> ioapic1: routing intpin 10 (PCI IRQ 26) to vector 53
> bge0: [MPSAFE]
> bge1: <Broadcom BCM5714 B3, ASIC rev. 0x8003> mem 0xe8230000-0xe823ffff,0xe82200
> 00-0xe822ffff irq 27 at device 4.1 on pci4
> bge1: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xe8230000
> miibus1: <MII bus> on bge1
> brgphy1: <BCM5780 10/100/1000baseTX PHY> on miibus1
> brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX
> -FDX, auto
> bge1: bpf attached
> bge1: Ethernet address: 00:11:25:c4:1d:63
> ioapic1: routing intpin 11 (PCI IRQ 27) to vector 54
> bge1: [MPSAFE]
> pcib5: <ACPI PCI-PCI bridge> at device 8.0 on pci0
> pcib5: secondary bus 5
> pcib5: subordinate bus 5
> pcib5: I/O decode 0xf000-0xfff
> pcib5: memory decode 0xfff00000-0xfffff
> pcib5: prefetched decode 0xfff00000-0xfffff
> pci5: <ACPI PCI bus> on pcib5
> pci5: physical bus=5
> pcib6: <ACPI PCI-PCI bridge> at device 9.0 on pci0
> pcib6: secondary bus 6
> pcib6: subordinate bus 6
> pcib6: I/O decode 0xf000-0xfff
> pcib6: memory decode 0xfff00000-0xfffff
> pcib6: prefetched decode 0xfff00000-0xfffff
> pci6: <ACPI PCI bus> on pcib6
> pci6: physical bus=6
> pcib7: <ACPI PCI-PCI bridge> at device 10.0 on pci0
> pcib7: secondary bus 7
> pcib7: subordinate bus 7
> pcib7: I/O decode 0xf000-0xfff
> pcib7: memory decode 0xfff00000-0xfffff
> pcib7: prefetched decode 0xfff00000-0xfffff
> pci7: <ACPI PCI bus> on pcib7
> pci7: physical bus=7
> pcib8: <ACPI PCI-PCI bridge> at device 11.0 on pci0
> pcib8: secondary bus 8
> pcib8: subordinate bus 8
> pcib8: I/O decode 0xf000-0xfff
> pcib8: memory decode 0xfff00000-0xfffff
> pcib8: prefetched decode 0xfff00000-0xfffff
> pcib8: could not get PCI interrupt routing table for \\_SB_.PCI0.EXB4 - AE_NOT_F
> OUND
> pci8: <ACPI PCI bus> on pcib8
> pci8: physical bus=8
> pcib9: <ACPI Host-PCI bridge> on acpi0
> pcib9: reading config registers from 0:25:0
> pcib9: couldn't read bus number from cfg space
> pcib9: trying bus number 9
> pcib9: could not get PCI interrupt routing table for \\_SB_.PCI1 - AE_NOT_FOUND
> pci9: <ACPI PCI bus> on pcib9
> pci9: physical bus=9
> acpi_button0: <Power Button> on acpi0
> speaker0: <PC speaker> port 0x61 on acpi0
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0: irq maps: 0 0 0 0
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
> sio0: type 16550A
> ioapic0: routing intpin 4 (ISA IRQ 4) to vector 55
> sio: sio0 already exists; skipping it
> pnp_identify: Trying Read_Port at 203
> pnp_identify: Trying Read_Port at 243
> pnp_identify: Trying Read_Port at 283
> pnp_identify: Trying Read_Port at 2c3
> pnp_identify: Trying Read_Port at 303
> pnp_identify: Trying Read_Port at 343
> pnp_identify: Trying Read_Port at 383
> pnp_identify: Trying Read_Port at 3c3
> PNP Identify complete
> sc: sc0 already exists; skipping it
> vga: vga0 already exists; skipping it
> isa_probe_children: disabling PnP devices
> isa_probe_children: probing non-PnP devices
> ipmi0: <IPMI System Interface> on isa0
> ipmi0: KCS mode found at io 0xca2 alignment 0x1 on isa
> orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xc9000-0xccfff on isa0
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> atkbd: the current kbd controller command byte 0047
> atkbd: keyboard ID 0xffffffff (1)
> atkbd: failed to reset the keyboard.
> kbd0 at atkbd0
> kbd0: atkbd0, AT 84 (1), config:0x0, flags:0x3d0000
> ioapic0: routing intpin 1 (ISA IRQ 1) to vector 56
> atkbd0: [GIANT-LOCKED]
> fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
> ppc0 failed to probe at irq 7 on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> sio1: irq maps: 0 0 0 0
> sio1: probe failed test(s): 0 1 2 4 6 7 9
> sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
> sio2: not probed (disabled)
> sio3: not probed (disabled)
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> isa_probe_children: probing PnP devices
> ukbd0: ATEN UC-10KM V1.3.121, rev 1.10/1.00, addr 2, iclass 3/1
> kbd: new array size 4
> kbd1 at ukbd0
> kbd1: ukbd0, generic (0), config:0x0, flags:0x1d0000
> Device configuration finished.
> Reducing kern.maxvnodes 130867 -> 100000
> lapic: Divisor 2, Frequency 99750465 hz
> Timecounter "TSC" frequency 2793019707 Hz quality -100
> Timecounters tick every 1.000 msec
> ipfw2 initialized, divert loadable, rule-based forwarding disabled, default to d
> eny, logging limited to 100 packets/entry by default
> lo0: bpf attached
> Waiting 3 seconds for SCSI devices to settle
> (xpt0:mpt0:0:-1:-1): reset bus
> ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
> ipmi0: IPMI device rev. 1, firmware rev. 1.81, version 1.5
> ipmi0: Number of channels 3
> ipmi0: Attached watchdog
> (probe1:mpt0:1:0:0): error 22
> (probe1:mpt0:1:0:0): Unretryable Error
> (probe1:mpt0:1:1:0): error 22
> (probe1:mpt0:1:1:0): Unretryable Error
> (probe1:mpt0:1:2:0): error 22
> (probe1:mpt0:1:2:0): Unretryable Error
> (probe1:mpt0:1:3:0): error 22
> (probe1:mpt0:1:3:0): Unretryable Error
> (probe1:mpt0:1:4:0): error 22
> (probe1:mpt0:1:4:0): Unretryable Error
> (probe1:mpt0:1:5:0): error 22
> (probe1:mpt0:1:5:0): Unretryable Error
> (probe0:mpt0:0:0:0): Retrying Command
> (probe0:mpt0:0:1:0): Retrying Command
> ses0 at mpt0 bus 0 target 8 lun 0
> ses0: <IBM 25P3495a S320 1 1> Fixed Processor SCSI-2 device
> ses0: Serial Number 1
> ses0: 3.300MB/s transfers
> ses0: SAF-TE Compliant Device
> pass0 at mpt0 bus 0 target 0 lun 0
> pass0: <IBM-ESXS ST373207LC FN B26C> Fixed Direct Access SCSI-4 device
> pass0: Serial Number 3KT4A4RN00007640LBTT
> pass0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Ena
> bled
> pass1 at mpt0 bus 0 target 1 lun 0
> pass1: <IBM-ESXS ST373207LC FN B26C> Fixed Direct Access SCSI-4 device
> pass1: Serial Number 3KT4DDM700007640LDQE
> pass1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Ena
> bled
> pass2 at mpt0 bus 0 target 8 lun 0
> pass2: <IBM 25P3495a S320 1 1> Fixed Processor SCSI-2 device
> pass2: Serial Number 1
> pass2: 3.300MB/s transfers
> pt0 at mpt0 bus 0 target 8 lun 0
> pt0: <IBM 25P3495a S320 1 1> Fixed Processor SCSI-2 device
> pt0: Serial Number 1
> pt0: 3.300MB/s transfers
> GEOM: new disk da0
> GEOM: new disk da1
> SMP: AP CPU #1 Launched!
> cpu1 AP:
> ID: 0x01000000 VER: 0x00040010 LDR: 0x00000000 DFR: 0xffffffff
> lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
> timer: 0x000200ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
> ioapic0: Assigning ISA IRQ 1 to local APIC 0
> ioapic0: Assigning ISA IRQ 4 to local APIC 1
> ioapic0: Assigning ISA IRQ 9 to local APIC 0
> ioapic0: Assigning ISA IRQ 10 to local APIC 1
> ioapic0: Assigning ISA IRQ 14 to local APIC 0
> ioapic0: Assigning ISA IRQ 15 to local APIC 1
> ioapic1: Assigning PCI IRQ 18 to local APIC 0
> ioapic1: Assigning PCI IRQ 26 to local APIC 1
> ioapic1: Assigning PCI IRQ 27 to local APIC 0
> da0 at mpt0 bus 0 target 0 lun 0
> da0: <IBM-ESXS ST373207LC FN B26C> Fixed Direct Access SCSI-4 device
> da0: Serial Number 3KT4A4RN00007640LBTT
> da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabl
> ed
> da0: 70006MB (143374000 512 byte sectors: 255H 63S/T 8924C)
> da1 at mpt0 bus 0 target 1 lun 0
> da1: <IBM-ESXS ST373207LC FN B26C> Fixed Direct Access SCSI-4 device
> da1: Serial Number 3KT4DDM700007640LDQE
> da1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabl
> ed
> da1: 70006MB (143374000 512 byte sectors: 255H 63S/T 8924C)
>
> Thanks for your time.
>
> Sincerely,
> Jason Chang
>
> _______________________________________________
> freebsd-stable at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"
More information about the freebsd-stable
mailing list