Unable to use my USB MP4 player: FreeBSD hangs

[Dominique Goncalves]

Hi,

I'm trying to connect my USB MP4 player to transfer some video and
music files, but when I plug the player FreeBSD hangs at this point:

Jun 23 15:00:07 lost kernel: umass1: vendor 0x10d6 USB 2.0(HS) Flash
Disk, rev 2.00/1.00, addr 2
Jun 23 15:00:07 lost kernel: da4 at umass-sim1 bus 1 target 0 lun 0
Jun 23 15:00:07 lost kernel: da4: <USB 2.0 (HS) Flash Disk 1.00>
Removable Direct Access SCSI-0 device
Jun 23 15:00:07 lost kernel: da4: 40.000MB/s transfers
Jun 23 15:00:07 lost kernel: da4: 967MB (1982129 512 byte sectors: 64H
32S/T 967C)

I mean by hang that with my gnome session nothing happens when I try
to open something and it's the same on a virtual console I can't login
or type something.

Everything come back when I unplug the reader :

Jun 23 15:00:25 lost kernel: umass1: BBB reset failed, IOERROR
Jun 23 15:00:25 lost kernel: umass1: BBB bulk-in clear stall failed, IOERROR
Jun 23 15:00:25 lost kernel: umass1: BBB bulk-out clear stall failed, IOERROR
Jun 23 15:00:25 lost kernel: (da4:umass-sim1:1:0:0): Synchronize cache
failed, status == 0x4, scsi status == 0x0
Jun 23 15:00:25 lost kernel: umass1: at uhub1 port 5 (addr 2) disconnected
Jun 23 15:00:25 lost kernel: (da4:umass-sim1:1:0:0): lost device
Jun 23 15:00:25 lost kernel: (da4:dead_sim0:0:0:0): removing device entry
Jun 23 15:00:25 lost kernel: umass1: detached

Let me know if you need more informations.
Thanks for your help,
Regards.

%uname -a
FreeBSD lost 6.2-STABLE FreeBSD 6.2-STABLE #1: Sat Jun  2 15:34:52
CEST 2007     root at lost:/usr/obj/usr/src/sys/GENERIC  i386

%dmesg
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-STABLE #1: Sat Jun  2 15:34:52 CEST 2007
    root at lost:/usr/obj/usr/src/sys/GENERIC
ACPI APIC Table: <Nvidia AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (2209.90-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x40fb2  Stepping = 2
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow>
  AMD Features2=0x1f<LAHF,CMP,<b2>,<b3>,CR8>
  Cores per package: 2
real memory  = 805240832 (767 MB)
avail memory = 770244608 (734 MB)
ioapic0: Changing APIC ID to 2
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <Nvidia AWRDACPI> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
pci0: <memory, RAM> at device 1.2 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff irq
21 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 8 ports with 8 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff
irq 22 at device 2.1 on pci0
ehci0: [GIANT-LOCKED]
usb1: EHCI version 1.0
usb1: companion controller, 10 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 8 ports with 8 removable, self powered
pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci1: <ACPI PCI bus> on pcib1
xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xcc00-0xcc3f irq 16 at
device 5.0 on pci1
miibus0: <MII bus> on xl0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:a0:24:f0:fc:71
fwohci0: <Texas Instruments TSB43AB23> mem
0xfd8ff000-0xfd8ff7ff,0xfd8f8000-0xfd8fbfff irq 19 at device 9.0 on
pci1
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:00:0a:e6:ff:69:86:6e
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:00:0a:69:86:6e
fwe0: Ethernet address: 02:00:0a:69:86:6e
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pcm0: <NVidia MCP61B High Definition Audio Controller> mem
0xfe028000-0xfe02bfff irq 23 at device 5.0 on pci0
atapci0: <GENERIC ATA controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 6.0 on
pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <GENERIC ATA controller> port
0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xdc00-0xdc0f mem
0xfe02d000-0xfe02dfff irq 20 at device 8.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
pcib2: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci3: <ACPI PCI bus> on pcib3
mskc0: <Marvell Yukon 88E8056 Gigabit Ethernet> port 0xac00-0xacff mem
0xfdcfc000-0xfdcfffff irq 16 at device 0.0 on pci3
msk0: <Marvell Technology Group Ltd. Yukon EC Ultra Id 0xb4 Rev 0x02> on mskc0
msk0: Ethernet address: 00:19:21:47:fc:89
miibus1: <MII bus> on msk0
e1000phy0: <Marvell 88E1149 Gigabit PHY> on miibus1
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
mskc0: [FAST]
pcib4: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci4: <ACPI PCI bus> on pcib4
nvidia0: <GeForce 6100 nForce 405> mem
0xfb000000-0xfbffffff,0xe0000000-0xefffffff,0xfc000000-0xfcffffff irq
21 at device 13.0 on pci0
nvidia0: [GIANT-LOCKED]
acpi_tz0: <Thermal Zone> on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfeff0000-0xfeff03ff
irq 0,8 on acpi0
device_attach: acpi_hpet0 attach returned 12
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
acpi_hpet0: <High Precision Event Timer> iomem 0xfeff0000-0xfeff03ff
irq 0,8 on acpi0
device_attach: acpi_hpet0 attach returned 12
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xd0000-0xd3fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/20.00, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
ugen0: vendor 0x041e product 0x401e, rev 1.10/1.00, addr 3
umass0: vendor 0x058f USB Reader, rev 1.10/1.00, addr 4
Timecounter "TSC" frequency 2209902166 Hz quality 800
Timecounters tick every 1.000 msec
acd0: DVDR <HL-DT-ST DVD-RW GSA-H11N/JH02> at ata0-master UDMA33
ad4: 238475MB <Seagate ST3250820AS 3.AAD> at ata2-master UDMA33
pcm0: <HDA Codec: Realtek ALC888>
pcm0: <HDA Driver Revision: 20070505_0044>
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x01
cd0 at ata0 bus 0 target 0 lun 0
cd0: <HL-DT-ST DVD-RW_GSA-H11N JH02> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Generic USB SD Reader 1.00> Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da1 at umass-sim0 bus 0 target 0 lun 1
da1: <Generic USB CF Reader 1.01> Removable Direct Access SCSI-0 device
da1: 1.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da2 at umass-sim0 bus 0 target 0 lun 2
da2: <Generic USB SM Reader 1.02> Removable Direct Access SCSI-0 device
da2: 1.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da3 at umass-sim0 bus 0 target 0 lun 3
da3: <Generic USB MS Reader 1.03> Removable Direct Access SCSI-0 device
da3: 1.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad4s3a
umass1: vendor 0x10d6 USB 2.0(HS) Flash Disk, rev 2.00/1.00, addr 2
da4 at umass-sim1 bus 1 target 0 lun 0
da4: <USB 2.0 (HS) Flash Disk 1.00> Removable Direct Access SCSI-0 device
da4: 40.000MB/s transfers
da4: 967MB (1982129 512 byte sectors: 64H 32S/T 967C)
umass1: BBB reset failed, IOERROR
umass1: BBB bulk-in clear stall failed, IOERROR
umass1: BBB bulk-out clear stall failed, IOERROR
(da4:umass-sim1:1:0:0): Synchronize cache failed, status == 0x4, scsi
status == 0x0
umass1: at uhub1 port 5 (addr 2) disconnected
(da4:umass-sim1:1:0:0): lost device
(da4:dead_sim0:0:0:0): removing device entry
umass1: detached


-- 
There's this old saying: "Give a man a fish, feed him for a day. Teach
a man to fish, feed him for life."