iSCSI initiator tester wanted

[Danny Braniss]

> This is an OpenPGP/MIME signed message (RFC 2440 and 3156)
> --------------enig2465C3FB4D976B8B44FBA3F0
> Content-Type: text/plain; charset=UTF-8
> Content-Transfer-Encoding: quoted-printable
> 
> Danny Braniss wrote:
> > Hi all,
> > 	I'm in the last mile before crossing the beta->release line,
> > so I'd like to get some input, and update the list of targets it suppor=
> ts.
> > you can obtain the driver from:
> 
> Have you tested it with net/iscsi-target from ports? I get the following
> messages and errors when I try it:
> 
> Jun  7 22:53:08 finstall kernel: ic_action: called
> Jun  7 22:53:08 finstall kernel: ic_action: func_code=3D0x901 flags=3D0xc=
> 0
> status=3D0x0 target=3D0 lun=3D0 retry_count=3D1 timeout=3D300000
> Jun  7 22:53:08 finstall kernel: ic_action: XPT_SCSI_IO cmd=3D0x35
> Jun  7 22:53:08 finstall kernel: scsi_encap: called
> Jun  7 22:53:08 finstall kernel: scsi_encap: ccb->sp=3D0xc2e97c00
> Jun  7 22:53:08 finstall kernel: dwl: called
> Jun  7 22:53:08 finstall kernel: isc_qout: called
> Jun  7 22:53:08 finstall kernel: 0] isc_qout: enqued: pq=3D0xc37ff0bc
> Jun  7 22:53:08 finstall kernel: proc_out: called
> Jun  7 22:53:08 finstall kernel: 0] proc_out: opcode=3D0x1 sn(cmd=3D0x27
> expCmd=3D0x26 maxCmd=3D0x26 expStat=3D0x0 itt=3D0x27)
> Jun  7 22:53:08 finstall kernel: isc_sendPDU: called
> Jun  7 22:53:08 finstall kernel: 0] ism_proc: odone=3D1
> Jun  7 22:53:08 finstall kernel: proc_out: called
> Jun  7 22:53:08 finstall kernel: 0] ism_proc: odone=3D0
> Jun  7 22:53:08 finstall kernel: so_input: called
> Jun  7 22:53:08 finstall kernel: so_getbhs: called
> Jun  7 22:53:08 finstall kernel: proc_out: called
> Jun  7 22:53:08 finstall kernel: 0] ism_proc: odone=3D0
> Jun  7 22:53:08 finstall kernel: so_recv: called
> Jun  7 22:53:08 finstall kernel: 0] so_recv: len=3D48] opcode=3D0x21
> ahs_len=3D0x0 ds_len=3D0x0
> Jun  7 22:53:08 finstall kernel: ism_recv: called
> Jun  7 22:53:08 finstall kernel: 0] ism_recv: opcode=3D0x21 itt=3D0x27
> stat#0x1 maxcmd=3D0x27
> Jun  7 22:53:08 finstall kernel: _scsi_rsp: called
> Jun  7 22:53:08 finstall kernel: _scsi_rsp: itt=3D27 pq=3D0xc37ff5e0
> opq=3D0xc37ff0bc
> Jun  7 22:53:08 finstall kernel: iscsi_done: called
> Jun  7 22:53:08 finstall kernel: _scsi_done: called
> Jun  7 22:53:08 finstall kernel: _scsi_done: ccb_h->status=3D1
> Jun  7 22:53:08 finstall kernel: so_input: called
> Jun  7 22:53:08 finstall kernel: so_getbhs: called
> Jun  7 22:53:08 finstall kernel: proc_out: called
> Jun  7 22:53:08 finstall kernel: 0] ism_proc: odone=3D0
> Jun  7 22:53:08 finstall iscontrol[2084]: cam_open_btl: no passthrough
> device found at 1:0:1
> Jun  7 22:53:08 finstall iscontrol[2084]: cam_open_btl: no passthrough
> device found at 1:0:2
> Jun  7 22:53:08 finstall iscontrol[2084]: cam_open_btl: no passthrough
> device found at 1:0:3
> Jun  7 22:53:38 finstall kernel: _nop_out: called
> Jun  7 22:53:38 finstall kernel: 0] _nop_out: cws=3D1
> Jun  7 22:53:38 finstall kernel: proc_out: called
> Jun  7 22:53:38 finstall kernel: 0] ism_proc: odone=3D0
> 
> The message on the machine running scsi-target is: "Unsupported INQUIRY
> VPD page 80"
yes, I have tested it against ports/net/iscsi-target, I use it to try out
errror recovery :-), and as far as I could tell it's harmelss. 
Anothere thing I can report is that running both (target/initiator) does not
work, and it seems that the target gets stuck.

danny