HP DL365, Smart Array P800, MSA60: CAM_REQ_CMP_ERR
Aleksey Perov
algardo at sura.ru
Thu Jul 26 07:50:58 UTC 2007
Hi,
HP DL365 (dual amd opteron), Smart Array P800 connected to MSA60 with 9
750GB SATA drives configured as one logical RAID5 volume. FreeBSD
6-STABLE csupped yesterday. Kernel is GENERIC.
System failed to create device entry for this volume.
Here's the relevant output of dmesg when booted in verbose mode:
svalka:~# dmesg | egrep '(ciss0|pass0)'
ciss0: <HP Smart Array P800> port 0x5000-0x50ff mem 0xfdf00000-0xfdffffff,0xfdef0000-0xfdef0fff irq 16 at device 0.0 on pci19
ciss0: Reserved 0x100000 bytes for rid 0x10 type 3 at 0xfdf00000
ciss0: [GIANT-LOCKED]
ciss0: using 256 of 1024 available commands
ciss0: firmware 2.10
ciss0: 1 SCSI channels
ciss0: signature 'CISS'
ciss0: valence 3
ciss0: supported I/O methods 0x80000006<simple,performant>
ciss0: active I/O method 0x3<simple>
ciss0: 4G page base 0x00000000
ciss0: interrupt coalesce delay 1000us
ciss0: interrupt coalesce count 16
ciss0: max outstanding commands 1024
ciss0: bus types 0x200000
ciss0: server name ''
ciss0: heartbeat 0x50
ciss0: 11 physical devices
ciss0: 1 logical drive
ciss0: logical drive (b0t0): RAID 5, 2096640MB online
pass0 at ciss0 bus 0 target 0 lun 0
pass0: <COMPAQ RAID 5 VOLUME OK> Fixed Direct Access SCSI-5 device
pass0: Serial Number P986COMPAQ RAID
pass0: 135.168MB/s transfers
(da0:ciss0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(da0:ciss0:0:0:0): Retrying Command
(da0:ciss0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(da0:ciss0:0:0:0): Retrying Command
(da0:ciss0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(da0:ciss0:0:0:0): Retrying Command
(da0:ciss0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(da0:ciss0:0:0:0): Retrying Command
(da0:ciss0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(da0:ciss0:0:0:0): error 5
(da0:ciss0:0:0:0): Retries Exausted
(da0:ciss0:0:0:0): got CAM status 0x4
(da0:ciss0:0:0:0): fatal error, failed to attach to device
(da0:ciss0:0:0:0): lost device
(da0:ciss0:0:0:0): removing device entry
Also tried CURRENT snapshot 200706, the result is the same.
A strange point is that driver sees "11 physical devices" and
"2096640MB", while in fact there are only 9 drives and over 5 TB, as
reported by Array Configuration Utility.
Yes, I'm aware that MSA60 is not listed as supported in Hardware notes,
but...
Any clues?
-- Aleksey
More information about the freebsd-stable
mailing list