Dual Core Problems

Ivaylo Mateev imateev at uos.de
Tue Jul 10 11:36:20 UTC 2007


SMP  compiled ???
UUpss I just looked in my kernel config file. .... SMP was  
commented .... I tought I uncommented after I added it , but ..... so  
SMP is up and running, but the ACPI Problem still exists.

acpi.ko loaded

uname -a:

FreeBSD heavymetal 6.2-STABLE FreeBSD 6.2-STABLE #4: Tue Jul 10  
14:46:47 CEST 2007 root@:/usr/obj/usr/src/sys/HEAVYMETAL i386

hier dmesg

Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-STABLE #4: Tue Jul 10 14:46:47 CEST 2007
     root@:/usr/obj/usr/src/sys/HEAVYMETAL
ACPI APIC Table: <Nvidia AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (2375.02-MHz 686- 
class CPU)
   Origin = "AuthenticAMD"  Id = 0x40fb2  Stepping = 2
    
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE 
,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
   Features2=0x2001<SSE3,CX16>
   AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow>
   AMD Features2=0x1f<LAHF,CMP,<b2>,<b3>,CR8>
   Cores per package: 2
real memory  = 804192256 (766 MB)
avail memory = 769056768 (733 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
  cpu0 (BSP): APIC ID:  0
  cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <Nvidia AWRDACPI> on motherboard
acpi_hpet0: <High Precision Event Timer> iomem 0xfeff0000-0xfeff03ff  
on acpi0
Timecounter "HPET" frequency 25000000 Hz quality 2000
acpi0: Power Button (fixed)
acpi0: reservation of feff0000, 100 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
pci0: <memory, RAM> at device 1.2 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff irq  
21 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 5 ports with 5 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff  
irq 22 at device 2.1 on pci0
ehci0: [GIANT-LOCKED]
usb1: EHCI version 1.0
usb1: companion controller, 12 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 5 ports with 5 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xfe02d000-0xfe02dfff irq  
23 at device 4.0 on pci0
ohci1: [GIANT-LOCKED]
usb2: OHCI version 1.0, legacy support
usb2: <OHCI (generic) USB controller> on ohci1
usb2: USB revision 1.0
uhub2: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 5 ports with 5 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe02c000-0xfe02c0ff  
irq 20 at device 4.1 on pci0
ehci1: [GIANT-LOCKED]
usb3: EHCI version 1.0
usb3: companion controller, 12 ports each: usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci1
usb3: USB revision 2.0
uhub3: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 5 ports with 5 removable, self powered
atapci0: <GENERIC ATA controller> port  
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 6.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pcm0: <NVidia (Unknown) High Definition Audio Controller> mem  
0xfe020000-0xfe023fff irq 21 at device 7.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 8.0 on pci0
pci1: <ACPI PCI bus> on pcib1
atapci1: <GENERIC ATA controller> port  
0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xdc00-0xdc0f mem  
0xfe026000-0xfe027fff irq 22 at device 9.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
nfe0: <NVIDIA nForce MCP67 Networking Adapter> port 0xd800-0xd807 mem  
0xfe02b000-0xfe02bfff,0xfe02a000-0xfe02a0ff,0xfe029000-0xfe02900f irq  
23 at device 10.0 on pci0
miibus0: <MII bus> on nfe0
e1000phy0: <Marvell 88E1116 Gigabit PHY> on miibus0
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,  
1000baseTX-FDX, auto
nfe0: Ethernet address: 00:50:8d:9f:27:19
nfe0: [FAST]
pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 15.0 on pci0
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 16.0 on pci0
pci7: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 17.0 on pci0
pci8: <ACPI PCI bus> on pcib8
nvidia0: <GeForce 7025 / NVIDIA nForce 630a> mem  
0xfb000000-0xfbffffff,0xe0000000-0xefffffff,0xfc000000-0xfcffffff irq  
20 at device 18.0 on pci0
nvidia0: [GIANT-LOCKED]
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on  
isa0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
Timecounters tick every 1.000 msec
acd0: DVDROM <TEAC DV-516GA/G4S3> at ata0-master UDMA33
ad7: 152627MB <SAMSUNG HD161HJ JF100-15> at ata3-slave UDMA33
pcm0: <HDA Codec: Realtek ALC888>
pcm0: <HDA Driver Revision: 20070619_0045>
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad7s1a
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
umass0: USBest Technology USB Mass Storage Device, rev 2.00/1.00, addr 2
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <JetFlash TS1GJFV10 0.00> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 983MB (2015231 512 byte sectors: 64H 32S/T 983C)





More information about the freebsd-stable mailing list