Failed to mount umass with Motorola Razr V3x

[AstraSerg]

>>> xptioctl: pass driver is not in the kernel <<<<
>>> xptioctl: put "device pass0" in your kernel config <<<<


On Friday 16 February 2007 05:33, Eric L. Chen wrote:
> Hi,
> I have a Motorola V3x phone with 1GB T-Flash memory card.
> It can mount as a removal drive on Windows XP and Ubuntu, but on FreeBSD
> (6.2 stable) will cause these message (see below) and failed to mount.
> Does any one know how to fix it?
> BTW, If I switch V3x USB as UMTS modem, FreeBSD still cannot use it as
> modem device.
>
> /Eric
>
> ----------
> umass0: Motorola Inc. Motorola Phone (RAZRV3x), rev 1.10/0.01, addr 2
> umass0: Get Max Lun not supported (SHORT_XFER)
> xptioctl: pass driver is not in the kernel
> xptioctl: put "device pass0" in your kernel config filexptioctl: put "device 
pass0" in your kernel config file
> da0 at umass-sim0 bus 0 target 0 lun 0
> da0: <Motorola Motorola Phone 2.31> Removable Direct Access SCSI-2
> device
> da0: 1.000MB/s transfers
> da0: 952MB (1950721 512 byte sectors: 64H 32S/T 952C)
> (da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 0 1d c4 0 0 0 1 0
> (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (da0:umass-sim0:0:0:0): SCSI Status: Check Condition
> (da0:umass-sim0:0:0:0): MEDIUM ERROR asc:0,0
> (da0:umass-sim0:0:0:0): No additional sense information
> (da0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
> (da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 0 1d c4 0 0 0 1 0
> (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (da0:umass-sim0:0:0:0): SCSI Status: Check Condition
> (da0:umass-sim0:0:0:0): MEDIUM ERROR asc:0,0
> (da0:umass-sim0:0:0:0): No additional sense information
> (da0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
> (da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 0 1d c4 0 0 0 1 0
> (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (da0:umass-sim0:0:0:0): SCSI Status: Check Condition
> (da0:umass-sim0:0:0:0): MEDIUM ERROR asc:0,0
> (da0:umass-sim0:0:0:0): No additional sense information
> (da0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
> (da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 0 1d c4 0 0 0 1 0
> (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (da0:umass-sim0:0:0:0): SCSI Status: Check Condition
> (da0:umass-sim0:0:0:0): MEDIUM ERROR asc:0,0
> (da0:umass-sim0:0:0:0): No additional sense information
> (da0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
> (da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 0 1d c4 0 0 0 1 0
> (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (da0:umass-sim0:0:0:0): SCSI Status: Check Condition
> (da0:umass-sim0:0:0:0): MEDIUM ERROR asc:0,0
> (da0:umass-sim0:0:0:0): No additional sense information
> (da0:umass-sim0:0:0:0): Retries Exhausted
> ----------

-- 
Sergey Yaroshevsky,
astraserg at proc.ru