xorg : Drm with Ati X700M

[Eric L. Chen]

Hi
Refer http://wikitest.freebsd.org/ModularXorg upgrade to xorg-7.2.
Then X700 DRM will enabled.
The 3D-Desktop works OK, but beryl will broken rendering.
My test was on Acer TM4102 (X700M with 64M video ram).
/Eric

On Sat, 2007-02-03 at 10:30 +0400, Ikare wrote:
> Hi,
> 
> After upgrading to 6.2, I've got some troubles with DRI/DRM : when DRI 
> is enable in xorg.conf, I get the following lines in DMESG :
> 
> ----------------------
> error: [drm:pid2058:radeon_do_init_cp] *ERROR* Cannot initialise DRM on 
> this card
> This card requires a new X.org DDX for 3D
> ----------------------
> 
> And DRI is disable as shown in Xorg.log :
> 
> -----------------------------
> (II) RADEON(0): [drm] installed DRM signal handler
> (II) RADEON(0): [DRI] installation complete
> (II) RADEON(0): [drm] removed 1 reserved context for kernel
> (II) RADEON(0): [drm] unmapping 8192 bytes of SAREA 0xc5654000 at 0x2881c000
> (II) RADEON(0): Render acceleration disabled
> (WW) RADEON(0): Direct rendering disabled
> ----------------------------
> 
> DRI worked under 6.1 ...
> 
> drm are built in a custom kernel :
> 
> -----------------------
> device          drm
> device          radeondrm
> ------------------------
> 
> My sources/ports are sync.
> 
> Any ideas ?
> 
> Thanks in advance
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 187 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20070203/ad1a66e1/attachment.pgp