7.0-BETA4 and msk problems

[Pyun YongHyeon]

On Mon, Dec 10, 2007 at 11:03:47AM +0200, Danny Braniss wrote:
 > > On Sun, Dec 09, 2007 at 02:41:28PM +0200, Danny Braniss wrote:
 > >  > with this onboard NIC (LOB?)
 > >  > 
 > >  > mskc0: <Marvell Yukon 88E8056 Gigabit Ethernet> 
 > >  > e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0
 > >  > 
 > >  > mskc0 at pci0:1:0:0:       class=0x020000 card=0x81f81043 chip=0x436411ab 
 > >  > rev=0x12 hdr=0x00
 > >  >     vendor     = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
 > >  >     device     = '88E8056 Yukon PCI-E Gigabit Ethernet Controller'
 > >  >     class      = network
 > >  >     subclass   = ethernet
 > >  > 
 > >  > I'm getting allot of:
 > >  > 	msk0: watchdog timeout
 > >  > and
 > >  > 	mskc0: Tx descriptor error
 > >  > and 
 > >  > 	msk0: link state changed to DOWN
 > >  > and
 > >  > 	msk0: link state changed to UP
 > >  > 
 > >  > any help is most welcome,
 > >  > 	danny
 > >  > 
 > >  > 
 > > 
 > > It seems that the issue happens only on 88E8056/88E1149 PHY.
 > > See PR 116853 and 114631.
 > > Sorry, I have no cluet yet.
 > 
 > to add some more noise, this is the first host that panicked too :-)
 > anything I can do to help?

Probably ship the hardware to me? :)

 > 	danny
 > 
 > 

-- 
Regards,
Pyun YongHyeon