Intel DG31PR and RTL8168/8111 issue

Thu Dec 6 11:20:21 PST 2007

----- Original Message ----
> From: Pyun YongHyeon <pyunyh at gmail.com>
> To: Abdullah Ibn Hamad Al-Marri <wearabnet at yahoo.ca>
> Cc: FreeBSD STABLE <freebsd-stable at freebsd.org>
> Sent: Wednesday, December 5, 2007 2:43:08 PM
> Subject: Re: Intel DG31PR and RTL8168/8111 issue
> 
> On Tue, Dec 04, 2007 at 07:42:34AM -0800, Abdullah Ibn Hamad
> Al-Marri
> 
 wrote:
> 
> [...]
> 
>  > 
>  > I'll try the patch you sent too when the server reaches the ISP
> and
> 
 being online.
>  > 
>  > Do you have any comments?
>  > 
> 
> The previous patch you used may have problems on multicast filtering.
> I'm not sure but all PCIe based controller from RealTek swapped
> multicast hash table register so it would be great if you can test
> latest patch.
> 
> -- 
> Regards,
> Pyun YongHyeon
> 

Heya Pyun!

It looks ok to me, thank you did a great job!

cd /usr/src/sys && patch < /sys/dev/re/re.spin3.patch
Hmm...  Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|Index: dev/re/if_re.c
|===================================================================
|RCS file: /home/ncvs/src/sys/dev/re/if_re.c,v
|retrieving revision 1.98
|diff -u -r1.98 if_re.c
|--- dev/re/if_re.c     3 Dec 2007 01:28:08 -0000       1.98
|+++ dev/re/if_re.c     4 Dec 2007 00:36:06 -0000
--------------------------
Patching file dev/re/if_re.c using Plan A...
Hunk #1 succeeded at 182.
Hunk #2 succeeded at 225.
Hunk #3 succeeded at 686.
Hunk #4 succeeded at 949.
Hunk
 #5 succeeded at 1332.
Hmm...  The next patch looks like a unified diff to me...
The text leading up to this was:
--------------------------
|Index: pci/if_rlreg.h
|===================================================================
|RCS file: /home/ncvs/src/sys/pci/if_rlreg.h,v
|retrieving revision 1.68
|diff -u -r1.68 if_rlreg.h
|--- pci/if_rlreg.h     26 Nov 2007 18:25:07 -0000      1.68
|+++ pci/if_rlreg.h     4 Dec 2007 00:36:06 -0000
--------------------------
Patching file pci/if_rlreg.h using Plan A...
Hunk #1 succeeded at 156.
done

FreeBSD 7.0-BETA4 #1: Thu Dec  6 19:07:31 UTC 2007
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU     E6750  @ 2.66GHz (2666.63-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x6fb  Stepping = 11
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe3fd<SSE3,RSVD2,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 2
usable memory = 4276064256 (4077 MB)
avail memory  = 4106997760 (3916 MB)
ACPI APIC Table: <INTEL DG31PR>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
acpi0: <INTEL> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 82a082a0600082a
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 82a082a0600082a
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xd070-0xd077 mem 0xd0200000-0xd027ffff,0xc0000000-0xcfffffff,0xd0100000-0xd01fffff irq 16 at device 2.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
hwrev = 38400000
hwrev = 38400000
hwrev = 38400000
hwrev = 38400000
hwrev = 38400000
hwrev = 38400000
re0: <RealTek 8168/8111B PCIe Gigabit Ethernet> port 0xc000-0xc0ff mem 0xd0020000-0xd0020fff irq 17 at device 0.0 on pci3
re0: Using 2 MSI messages
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re0: Ethernet address: 00:19:d1:a7:a4:72
re0: [FILTER]
re0: [FILTER]
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 SATA300 controller> port 0xd060-0xd067,0xd050-0xd053,0xd040-0xd047,0xd030-0xd033,0xd020-0xd02f irq 17 at device 31.2 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
ad4: 238475MB <WDC WD2500KS-00MJB0 02.01C03> at ata2-master SATA150
ad6: 715404MB <WDC WD7500AAKS-00RBA0 30.04G30> at ata3-master SATA150
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad4s1a
link_elf_obj: symbol sysctl__net_inet6_ip6_children undefined
kldload: Unsupported file type
re0: link state changed to UP

re0 at pci0:3:0:0: class=0x020000 card=0xd6088086 chip=0x816810ec rev=0x01 hdr=0x00
    vendor     = 'Realtek Semiconductor'
    device     = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC'
    class      = network
    subclass   = ethernet

Shall I issue more commands and send it?

Regards, 
-Abdullah Ibn Hamad Al-Marri
Arab Portal
http://www.WeArab.Net/

      ____________________________________________________________________________________
Never miss a thing.  Make Yahoo your home page. 
http://www.yahoo.com/r/hs