Qlogic 2340 problems

[Matthew Jacob]

That's an odd one. It means that the DMA of the ICB failed.

Three questions:

a) Tell me more about this system
b) Is this still a problem for the latest RELENG_6 branch changes?
c) Can you try a test kernel?

On 10/9/06, kreios at gmail.com <kreios at gmail.com> wrote:
> I having problems getting this card to attach in FreeBSD 6.1.  dmesg
> shows the following:
>
> Qlogic ISP Driver, FreeBSD Version 5.9, Core Version 2.10
> isp0: <Qlogic ISP 2312 PCI FC-AL Adapter> port 0x4000-0x40ff mem
> 0xed200000-0xed200fff irq 24 at device 1.0 on pci3
> isp0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0xed200000
> isp0: using Memory space register mapping
> ioapic1: routing intpin 0 (PCI IRQ 24) to vector 49
> isp0: [GIANT-LOCKED]
> isp0: Board Type 2312, Chip Revision 0x2, loaded F/W Revision 3.3.6
> isp0: 839 max I/O commands supported
> isp0: NVRAM Port WWN 0x210000e08b8fa3b0
> isp0: Mailbox Command 'INIT FIRMWARE' failed (HOST INTERFACE ERROR)
>
> BIOS has been enabled in the card and the module ispfw has been
> loaded.  Card works in Windows XP.  Not sure what to try next.  Card
> is hooked to a Brocade Silkworm 300 switch.  Disks I am trying to see
> are on an Apple Xserve RAID box.
>
> Thanks for you time,
> Dave
> _______________________________________________
> freebsd-stable at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"
>