rc doesn't see my script on boot

[Gregory Edigarov]

Hello, Everybody

Well, here is what I am doing:
ls -l /usr/local/etc/rc.d
total 30
-r-xr-xr-x  1 root  wheel  4744 Nov 13 11:38 apache22
-r-xr-xr-x  1 root  wheel   673 Nov 13 14:27 clamav-clamd
-r-xr-xr-x  1 root  wheel   722 Nov 13 14:27 clamav-freshclam
-r-xr-xr-x  1 root  wheel  1057 Nov 13 14:27 clamav-milter
-r-xr-xr-x  1 root  wheel  1254 Nov 13 13:01 gnugk
-r-xr-xr-x  1 root  wheel   198 Nov 15 01:17 l2tpd
-r-xr-xr-x  1 root  wheel   196 Nov 14 12:35 popa3d
-r-xr-xr-x  1 root  wheel  1642 Nov 13 11:19 quagga
-r-xr-xr-x  1 root  wheel  4371 Nov 13 14:00 samba
-r-xr-xr-x  1 root  wheel  1324 Nov 14 15:20 squid
-r-xr-xr-x  1 root  wheel   564 Nov 13 11:19 watchquagga

cat /usr/local/etc/rc.d/l2tpd
#!/bin/sh

#PROVIDE l2tpd
#REQUIRE NETWORKING

. /etc/rc.subr

name="l2tpd"
rcvar=`set_rcvar`
command="/usr/local/sbin/${name}"
flags=""
echo "l2tp debug"

load_rc_config $name
run_rc_command "$1"

in rc.conf:
l2tpd_enable="YES"

Then after  reboot:
ps ax | grep l2tpd
  667  v1  RL+    0:00.00 grep l2tpd

i.e no l2tpd has been started.
no messages on console, either. My script just got silently skipped.

What's  wrong?
--
With best  regards,
     Gregory Edigarov