(Seemingly) Spontaneous rebooting

Joe Holden joe at joeholden.co.uk
Thu Nov 16 23:05:34 PST 2006 

Hi, i'm observing random reboots on a dedicated machine I have with 1&1.

I have included as much information as I can think of, if there is 
anything else I can provide, please ask.

dmesg:
claire# dmesg
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-PRERELEASE #1: Sun Nov  5 14:16:45 UTC 2006
     root at claire.ber.rewt.org.uk:/usr/obj/usr/src/sys/claire
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2404.12-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0xf27  Stepping = 7
 
Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
   Features2=0x400<CNTX-ID>
real memory  = 1065353216 (1016 MB)
avail memory = 1033650176 (985 MB)
kbd1 at kbdmux0
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 4 Entries> on motherboard
pci0: <PCI bus> on pcib0
$PIR: No matching entry for 0.16.INTA
$PIR: No matching entry for 0.16.INTB
$PIR: No matching entry for 0.16.INTD
$PIR: No matching entry for 0.18.INTA
agp0: <VIA 8703 (P4M266x/P4N266) host to PCI bridge> mem 
0xea000000-0xea3fffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci0: <serial bus, USB> at device 16.0 (no driver attached)
pci0: <serial bus, USB> at device 16.1 (no driver attached)
pci0: <serial bus, USB> at device 16.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8235 UDMA133 controller> port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xdc00-0xdc0f at device 17.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xe000-0xe0ff mem 
0xea401000-0xea4010ff irq 15 at device 18.0 on pci0
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:40:63:c3:72:02
orm0: <ISA Option ROMs> at iomem 
0xc0000-0xcbfff,0xcc000-0xcffff,0xd0000-0xd17ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0501> can't assign resources (port)
Timecounter "TSC" frequency 2404116192 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 76319MB <Seagate ST380021A 3.05> at ata0-master UDMA100
Trying to mount root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
/usr: mount pending error: blocks 556 files 20
WARNING: /var was not properly dismounted
uhci0: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 15 at device 
16.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 12 at device 
16.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xea400000-0xea4000ff irq 11 
at device 16.3 on pci0
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <VIA VT6202 USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered

pciconf -lv:
claire# pciconf -lv
agp0 at pci0:0:0:  class=0x060000 card=0xa0031106 chip=0x31481106 rev=0x00 
hdr=0x00
     vendor   = 'VIA Technologies Inc'
     device   = 'VT8751 ProSavageDDR P4M266 System Controller'
     class    = bridge
     subclass = HOST-PCI
pcib1 at pci0:1:0: class=0x060400 card=0x00000080 chip=0xb0911106 rev=0x00 
hdr=0x01
     vendor   = 'VIA Technologies Inc'
     device   = 'VT8633 Apollo Pro 266 CPU to AGP Controller'
     class    = bridge
     subclass = PCI-PCI
uhci0 at pci0:16:0:        class=0x0c0300 card=0x30381106 chip=0x30381106 
rev=0x80 hdr=0x00
     vendor   = 'VIA Technologies Inc'
     device   = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)'
     class    = serial bus
     subclass = USB
uhci1 at pci0:16:1:        class=0x0c0300 card=0x30381106 chip=0x30381106 
rev=0x80 hdr=0x00
     vendor   = 'VIA Technologies Inc'
     device   = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)'
     class    = serial bus
     subclass = USB
ehci0 at pci0:16:3:        class=0x0c0320 card=0x31041106 chip=0x31041106 
rev=0x82 hdr=0x00
     vendor   = 'VIA Technologies Inc'
     device   = 'VT6202 USB 2.0 Enhanced Host Controller'
     class    = serial bus
     subclass = USB
isab0 at pci0:17:0:        class=0x060100 card=0xa0031106 chip=0x31771106 
rev=0x00 hdr=0x00
     vendor   = 'VIA Technologies Inc'
     device   = 'VT8235 PCI to ISA Bridge'
     class    = bridge
     subclass = PCI-ISA
atapci0 at pci0:17:1:      class=0x01018a card=0xa0031106 chip=0x05711106 
rev=0x06 hdr=0x00
     vendor   = 'VIA Technologies Inc'
     device   = 'VT82xxxx EIDE Controller (All VIA Chipsets)'
     class    = mass storage
     subclass = ATA
vr0 at pci0:18:0:  class=0x020000 card=0x01061106 chip=0x30651106 rev=0x74 
hdr=0x00
     vendor   = 'VIA Technologies Inc'
     device   = 'VT6102 Rhine II PCI Fast Ethernet Controller'
     class    = network
     subclass = ethernet
none0 at pci1:0:0: class=0x030000 card=0xa0031106 chip=0x8d045333 rev=0x00 
hdr=0x00
     vendor   = 'S3 Graphics Co., Ltd.'
     device   = '86C420 ProSavage DDR'
     class    = display
     subclass = VGA

uname -a:
claire# uname -a
FreeBSD claire.ber.rewt.org.uk 6.2-PRERELEASE FreeBSD 6.2-PRERELEASE #1: 
Sun Nov  5 14:16:45 UTC 2006 
root at claire.ber.rewt.org.uk:/usr/obj/usr/src/sys/claire  i386

df -h:
claire# df -h
Filesystem     Size    Used   Avail Capacity  Mounted on
/dev/ad0s1a    496M     61M    395M    13%    /
devfs          1.0K    1.0K      0B   100%    /dev
/dev/ad0s1e    496M     18K    456M     0%    /tmp
/dev/ad0s1f     70G    5.0G     59G     8%    /usr
/dev/ad0s1d    1.1G    102M    908M    10%    /var
devfs          1.0K    1.0K      0B   100%    /var/named/dev


As a side note: If anyone is wanting to know how to convert their evil 
1&1 linux machine to FreeBSD, send me an email and i'll send you the 
info (I intend to write an article on this eventually)


TIA,
Joe

More information about the freebsd-stable mailing list