Problem with the installer sysinstall.
Bruno Ducrot
ducrot at poupinou.org
Wed Nov 8 09:07:52 UTC 2006
On Tue, Nov 07, 2006 at 01:48:36PM -0500, Michael Butler wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Bruno Ducrot wrote:
> >> > cpu0: <ACPI CPU> on acpi0
> >> > acpi_perf0: <ACPI CPU Frequency Control> on cpu0
> >> > acpi_throttle0: <ACPI CPU Throttling> on cpu0
> >> > cpu1: <ACPI CPU> on acpi0
> >> > acpi_throttle1: <ACPI CPU Throttling> on cpu1
> >> > acpi_throttle1: failed to attach P_CNT
> >> > device_attach: acpi_throttle1 attach returned 6
> >
> > Anyway the OP should enable eist and p4tcc (by loading cpufreq on boot)
> > and both acpi_perf and acpi_throttle will be gone.
>
> Adding 'device cpufreq' results in dmesg looking like ..
>
> acpi0: <TOSINV Capell00> on motherboard
> acpi_bus_number: can't get _ADR
> acpi_bus_number: can't get _ADR
> acpi0: Power Button (fixed)
> acpi_bus_number: can't get _ADR
> acpi_bus_number: can't get _ADR
> ACPI-0356: *** Error: Region EmbeddedControl(3) has no handler
> ACPI-1304: *** Error: Method execution failed
> [\\_SB_.PCI0.PCIB.DOCK._STA] (Node 0xc64090e0), AE_NOT_EXIST
> ACPI-0239: *** Error: Method execution failed
> [\\_SB_.PCI0.PCIB.DOCK._STA] (Node 0xc64090e0), AE_NOT_EXIST
> ACPI-0356: *** Error: Region EmbeddedControl(3) has no handler
> ACPI-1304: *** Error: Method execution failed
> [\\_SB_.PCI0.PCIB.DOCK._STA] (Node 0xc64090e0), AE_NOT_EXIST
> ACPI-0239: *** Error: Method execution failed
> [\\_SB_.PCI0.PCIB.DOCK._STA] (Node 0xc64090e0), AE_NOT_EXIST
Strange. Does this happens only when you add cpufreq? Also,
could you please add a link (www or ftp) to a file generated by
acpidump -d -t > the_model_of_this_computer.asl?
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
> acpi_ec0: <Embedded Controller: GPE 0x16> port 0x62,0x66 on acpi0
> cpu0: <ACPI CPU> on acpi0
> est0: <Enhanced SpeedStep Frequency Control> on cpu0
> p4tcc0: <CPU Frequency Thermal Control> on cpu0
> cpu1: <ACPI CPU> on acpi0
> est1: <Enhanced SpeedStep Frequency Control> on cpu1
> p4tcc1: <CPU Frequency Thermal Control> on cpu1
Seems to be ok.
--
Bruno Ducrot
-- Which is worse: ignorance or apathy?
-- Don't know. Don't care.
More information about the freebsd-stable
mailing list