Dell 1955 Blade - Broadcom NIC not detected (BCM5708S)
Scott Long
scottl at samsco.org
Wed Nov 1 02:20:49 UTC 2006
Pyun YongHyeon wrote:
> On Tue, Oct 31, 2006 at 03:28:37PM +0200, Conrad Burger wrote:
> > On 31/10/06, Conrad Burger <conrad.burger at gmail.com> wrote:
> > >On 31/10/06, Scott Long <scottl at samsco.org> wrote:
> > >> Pyun YongHyeon wrote:
> > >> > On Mon, Oct 30, 2006 at 08:06:28PM -0700, Scott Long wrote:
> > >> > > Pyun YongHyeon wrote:
> > >> > > >On Mon, Oct 30, 2006 at 04:17:00PM +0200, Conrad Burger wrote:
> > >> > > > > I am trying to get FreeBSD to work on a Dell 1955 blade. Looks
> > >like
> > >> > > > > the NICs on the blade are not supported by the BCE or BGE
> > >driver.
> > >> > > > >
> > >> > > > > On Linux the NICs are identified as "06:00.0 Ethernet
> > >controller:
> > >> > > > > Broadcom Corporation NetXtreme II BCM5708S Gigabit Ethernet
> > >(rev 11)"
> > >> > > > >
> > >> > > > > >From "if_bce.c"
> > >> > > > > -------------------------
> > >> > > > > * The following controllers are not supported by this driver:
> > >> > > > > * (These are not "Production" versions of the controller.)
> > >> > > > > * BCM5706C A0, A1
> > >> > > > > * BCM5706S A0, A1, A2, A3
> > >> > > > > * BCM5708C A0, B0
> > >> > > > > * --> BCM5708S <-- A0, B0, B1
> > >> > > > >
> > >> > > > > Is there any reason why the chipset is not supported? Is there
> > >anyway
> > >> > > > > of getting the BCE or BGE driver to work with this chipset?
> > >Will it be
> > >> > > > > supported sometime in the near future?
> > >> > > > >
> > >> > > > > Any help would be much appreciated.
> > >> > > > >
> > >> > > >
> > >> > > >It seems that there is typo in bce(4) driver.
> > >> > > >Try attached patch.
> > >> > > >
> > >> > > >
> > >> > > >
> > >> > >
> > >>------------------------------------------------------------------------
> > >> > > >
> > >> > > >Index: if_bce.c
> > >> > > >===================================================================
> > >> > > >RCS file: /pool/ncvs/src/sys/dev/bce/if_bce.c,v
> > >> > > >retrieving revision 1.17
> > >> > > >diff -u -r1.17 if_bce.c
> > >> > > >--- if_bce.c 21 Oct 2006 07:54:39 -0000 1.17
> > >> > > >+++ if_bce.c 31 Oct 2006 00:37:47 -0000
> > >> > > >@@ -116,8 +116,8 @@
> > >> > > > "Broadcom NetXtreme II BCM5708 1000Base-T" },
> > >> > > >
> > >> > > > /* BCM5708S controllers and OEM boards. */
> > >> > > >- { BRCM_VENDORID, BRCM_DEVICEID_BCM5708, PCI_ANY_ID, PCI_ANY_ID,
> > >> > > >- "Broadcom NetXtreme II BCM5708 1000Base-T" },
> > >> > > >+ { BRCM_VENDORID, BRCM_DEVICEID_BCM5708S, PCI_ANY_ID,
> > >PCI_ANY_ID,
> > >> > > >+ "Broadcom NetXtreme II BCM5708S 1000Base-T" },
> > >> > > > { 0, 0, 0, 0, NULL }
> > >> > > > };
> > >> > > >
> > >> > > >
> > >> > > >
> > >> > >
> > >>------------------------------------------------------------------------
> > >> > >
> > >> > > Why remove a valid entry?
> > >> > >
> > >> >
> > >> > I didn't remove it. You can see duplicated BRCM_DEVICEID_BCM5708s in
> > >> > bce_devs.
> > >> >
> > >> > > Scott
> > >> >
> > >>
> > >> Oops, you're right. I've been accidentally ignoring this anyways, I'll
> > >> take care of it. Thanks!
> > >>
> > >> Scott
> > >>
> > >
> > >Thanks the kernel now recognizes the network interface.
> > >
> > >But it fails to "attach" the driver to the interface and gives the
> > >following error.
> > >"bce0 if_bce.c(531) SerDes controllers are not supported!"
> > >
> > >What now .... is there anything else I can try?
> > >
> > >Regards
> > >Conrad
> > >
> >
> > In if_bce.c I found the following comment "/* DRC - ToDo: Add SerDes
> > support. */".
> >
> > Looks like the SerDes code for the BCE driver still needs to be developed :(
> >
> > If someone could finish the SerDes code for the driver, I will spend
> > as much time as needed to test each code change that is attempted to
> > get the SerDes stuff working :)
> >
> > If needs be I will hook a console up to the system to make it
> > accessible over the internet.
> >
>
> Because I don't the hardware and datasheet for the chip I can't make
> any further changes for you. Sorry. But you can ask the driver author
> for a plan for SERDES transceiver support. CCed to David Christensen,
> the author of the driver.
>
I might try to take a look at this. I wonder if the Linux driver
already has support.
Scott
More information about the freebsd-stable
mailing list