Wireless USB Adapter DWL G122 not detected by ural(4)

[Dominique Goncalves]

Hi,

I'm trying to use a Wireless USB Adapter DWL G122 on RELENG_6 but it
is not detected and no ural0 interface is created, this device is
listed in the hardware section of ural(4).

$ uname -a
FreeBSD freebsd 6.1-PRERELEASE FreeBSD 6.1-PRERELEASE #2: Thu Mar 16
11:45:02 CET 2006     root at freebsd:/usr/obj/usr/src/sys/GENERIC  i386

# usbd -d -v
usbd: opened /dev/usb0
usbd: reading configuration file /etc/usbd.conf
usbd: opened /dev/usb
usbd: device-attach event at 1142509893.453666000, 802.11 bg WLAN, Ralink:
  vndr=0x07d1 prdct=0x3c03 rlse=0x0001 clss=0x0000 subclss=0x0000 prtcl=0x0000
  device names: ugen0
usbd: Found action 'USB device' for 802.11 bg WLAN, Ralink at ugen0
usbd: device-detach event at 1142509897.473305000, product 0x3c03,
vendor 0x07d1:
  vndr=0x07d1 prdct=0x3c03 rlse=0x0001 clss=0x0000 subclss=0x0000 prtcl=0x0000

Let me know if you need more information.

Thanks for your help.

Regards.

Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.1-PRERELEASE #2: Thu Mar 16 11:45:02 CET 2006
    root at freebsd:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium II/Pentium II Xeon/Celeron (397.95-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x652  Stepping = 2
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 134217728 (128 MB)
avail memory = 121806848 (116 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 5 Entries> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem
0x44000000-0x47ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
fxp0: <Intel 82558 Pro/100 Ethernet> port 0x2000-0x201f mem
0x40200000-0x40200fff,0x40100000-0x401fffff irq 11 at device 10.0 on
pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:08:c7:0f:5a:19
isab0: <PCI-ISA bridge> at device 20.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2040-0x204f at device 20.1 on
pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x2020-0x203f
irq 11 at device 20.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge> at device 20.3 (no driver attached)
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xe0000-0xe7fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (port)
Timecounter "TSC" frequency 397948150 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 6149MB <FUJITSU MPC3064AT CC05> at ata0-master UDMA33
acd0: CDROM <CD-224E/9.0A> at ata1-master PIO4
Trying to mount root from ufs:/dev/ad0s1a
ugen0: Ralink 802.11 bg WLAN, rev 2.00/0.01, addr 2
ugen0: at uhub0 port 1 (addr 2) disconnected
All threads purged from ugen0.1
All threads purged from ugen0
ugen0: detached

--
There's this old saying: "Give a man a fish, feed him for a day. Teach
a man to fish, feed him for life."