routed

Alexey Karagodov karagodov at gmail.com
Mon Mar 6 07:55:06 UTC 2006


hello!


while system start-up, routed takes very long time to start, about minute or
two.
and then actualy not starting till login prompt (so ntpdate can't obtain
time from internet and so on)
rc.conf:

watchdogd_enable="YES"
accounting_enable="YES"
check_quotas="YES"
defaultrouter="172.17.224.1 <http://10.0.224.1/>"
hostname="host <http://main.kp.clubnemo.ru/>"
cloned_interfaces="vlan1 vlan101 vlan102 vlan103"
ifconfig_em1="up"
ifconfig_vlan1="inet 172.16.0.1 netmask 255.255.0.0 vlan 1 vlandev em1"
ifconfig_vlan101="inet 82.111.222.111 <http://83.102.211.181/> netmask
255.255.255.240 vlan 101 vlandev em1"
ifconfig_vlan103="inet 172.17.244.73 <http://10.0.244.73/> netmask
255.255.224.0 vlan 103 vlandev em1"
ifconfig_vlan103_alias0="inet 192.168.0.49 netmask 255.255.255.0"
ifconfig_vlan103_alias1="ether 00:0a:48:0f:cb:ea"

 gateway_enable="YES"
router_enable="YES"
ipv6_enable="YES"
ipv6_gateway_enable="YES"
ipv6_router_enable="YES"
ipv6_default_interface="em0"
pf_enable="YES"
pflog_enable="YES"
named_enable="YES"
amd_enable="YES"
ftpd_enable="YES"
lpd_enable="YES"
nfs_reserved_port_only="NO"
nis_client_enable="YES"
nis_server_enable="YES"
ntpdate_enable="YES"
ntpdate_flags="-b pool.ntp.org"
ntpd_enable="YES"
ntpd_sync_on_start="YES"
rpcbind_enable="YES"
sshd_enable="YES"
usbd_enable="YES"
dhcpd_enable="YES"
apache22_enable="YES"
rpc_statd_enable="YES"
rpc_lockd_enable="YES"
mysql_enable="YES"
inetd_enable="YES"
swapfile="/var/swap/1GB"

#emulation
#svr4_enable="YES"
#linux_enable="YES"
#ibcs2_enable="YES"

#locale
keychange="61 ^[[K"
keybell="normal"
mousechar_start="3"
moused_enable="YES"
saver="green"
blanktime="60"
font8x8="koi8-r-8x8"
font8x14="koi8-r-8x14"
font8x16="koi8-r-8x16"
scrnmap="NO"
keyrate="fast"
keymap="ru.koi8-r"

dmesg.boot:
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.1-PRERELEASE #9: Fri Mar  3 15:52:49 MSK 2006
    XXX at XXX
ACPI APIC Table: <PTLTD          APIC  >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 3.60GHz (3600.14-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0xf41  Stepping = 1

Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>

  Features2=0x659d<SSE3,RSVD2,MON,DS_CPL,EST,TM2,CNTX-ID,CX16,<b14>>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  Hyperthreading: 2 logical CPUs
real memory  = 5368709120 (5120 MB)
avail memory = 4114673664 (3924 MB)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  6
 cpu3 (AP): APIC ID:  7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
ioapic3 <Version 2.0> irqs 72-95 on motherboard
ioapic4 <Version 2.0> irqs 96-119 on motherboard
ichwd module loaded
acpi0: <PTLTD   RSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <unknown> at device 0.1 (no driver attached)
pci0: <base peripheral> at device 1.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
ahd0: <Adaptec AIC7902 Ultra320 SCSI adapter> port
0x2400-0x24ff,0x2000-0x20ff mem 0xdd200000-0xdd201fff irq 32 at device
2.0on pci2
ahd0: [GIANT-LOCKED]
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
ahd1: <Adaptec AIC7902 Ultra320 SCSI adapter> port
0x2c00-0x2cff,0x2800-0x28ff mem 0xdd202000-0xdd203fff irq 33 at device
2.1on pci2
ahd1: [GIANT-LOCKED]
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
pci1: <base peripheral, interrupt controller> at device 0.1 (no driver
attached)
pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1
pci3: <ACPI PCI bus> on pcib3
em0: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port
0x3000-0x303f mem 0xdd300000-0xdd31ffff irq 54 at device 2.0 on pci3
em0: Ethernet address: 00:30:48:74:51:16
em1: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port
0x3040-0x307f mem 0xdd320000-0xdd33ffff irq 55 at device 2.1 on pci3
em1: Ethernet address: 00:30:48:74:51:17
pci1: <base peripheral, interrupt controller> at device 0.3 (no driver
attached)
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 6.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 0.0 on pci5
pci6: <ACPI PCI bus> on pcib6
pci5: <base peripheral, interrupt controller> at device 0.1 (no driver
attached)
pcib7: <ACPI PCI-PCI bridge> at device 0.2 on pci5
pci7: <ACPI PCI bus> on pcib7
pci5: <base peripheral, interrupt controller> at device 0.3 (no driver
attached)
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x1400-0x141f irq 16
at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0x1420-0x143f irq 19
at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0x1440-0x145f irq 18
at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0x1460-0x147f irq 16
at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem 0xdd001000-0xdd0013ff
irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib8: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci8: <ACPI PCI bus> on pcib8
pci8: <display, VGA> at device 1.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x14a0-0x14af at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <Intel ICH5 SATA150 controller> port
0x14d0-0x14d7,0x14c4-0x14c7,0x14c8-0x14cf,0x14c0-0x14c3,0x14b0-0x14bf irq 18
at device 31.2 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
ichsmb0: <Intel 82801EB (ICH5) SMBus controller> port 0x1100-0x111f irq 17
at device 31.3 on pci0
ichsmb0: [GIANT-LOCKED]
smbus0: <System Management Bus> on ichsmb0
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
device_attach: fdc0 attach returned 12
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
device_attach: fdc0 attach returned 12
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xc8fff,0xd3000-0xd3fff,0xd4000-0xd4fff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/20.00, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
ugen0: American Power Conversion Smart-UPS 750 RM FW:619.3.I USB FW:1.5, rev
1.10/0.06, addr 3
Timecounters tick every 1.000 msec
module_register_init: MOD_LOAD (amr_linux, 0xffffffff806305f0, 0) error 6
Waiting 5 seconds for SCSI devices to settle
(probe0:ahd0:0:0:0): No or incomplete CDB sent to device.
(probe0:ahd0:0:0:0): Protocol violation in Message-in phase.  Attempting to
abort.
(probe0:ahd0:0:0:0): Abort Message Sent
(probe0:ahd0:0:0:0): SCB 15 - Abort Tag Completed.
found == 0x1
da0 at ahd0 bus 0 target 0 lun 0
da0: <SEAGATE ST373453LC 0006> Fixed Direct Access SCSI-3 device
da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing
Enabled
da0: 70007MB (143374744 512 byte sectors: 255H 63S/T 8924C)
da1 at ahd0 bus 0 target 1 lun 0
da1: <SEAGATE ST373453LC 0006> Fixed Direct Access SCSI-3 device
da1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing
Enabled
da1: 70007MB (143374744 512 byte sectors: 255H 63S/T 8924C)
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
GEOM_MIRROR: Device gm0 created (id=2742535301).
GEOM_MIRROR: Device gm0: provider da0 detected.
GEOM_MIRROR: Device gm0: provider da1 detected.
GEOM_MIRROR: Device gm0: provider da1 activated.
GEOM_MIRROR: Device gm0: provider da0 activated.
GEOM_MIRROR: Device gm0: provider mirror/gm0 launched.
Trying to mount root from ufs:/dev/mirror/gm0s1a
Accounting enabled
NMIN NMNIMIS MIAI  SIIA 2SI AS02A0,  , E I22SE00I,A,  EEI ISSSAA f Aff f
fff
<
2
<<>f2
2>>


and another problem, strange kernel output, for example:
bla-bla-bla kernel: NMIN NMNIMIS MIAI  SIIA 2SI AS02A0,  , E I22SE00I,A,
EEI ISSSAA f Aff ffff<2<<>f22>>

please, help


More information about the freebsd-stable mailing list