FreeBSD 6.x on Dual PIII server only seeing one CPU ...
Marc G. Fournier
scrappy at hub.org
Fri Jun 23 20:44:58 UTC 2006
Now, looking back in my /var/log/messages files, I was right, it did see
two CPUs when I first installed the OS:
May 26 20:47:23 pluto kernel: cpu0 (BSP): APIC ID: 3
May 26 20:47:23 pluto kernel: cpu1 (AP): APIC ID: 0
Now, on June 10th, I'm seeing:
Jun 10 01:17:03 pluto kernel: iir0: SCSI-B, ID 1: MPI returned 0x0000004B
Jun 10 01:17:03 pluto kernel: iir0: SCSI-B, ID 3: MPI returned 0x0000004B
Jun 10 01:17:03 pluto kernel: iir0: SCSI-B, ID 2: MPI returned 0x0000004B
Jun 10 01:17:03 pluto kernel: iir0: SCSI-B, ID 3: MPI returned 0x0000004B
Jun 10 01:17:03 pluto kernel: iir0: SCSI-B, ID 2: MPI returned 0x0000004B
Jun 10 01:17:03 pluto kernel: iir0: SCSI-B, ID 3: MPI returned 0x0000004B
And on the 22nd, I'm still seeing 2 CPUs ...
Jun 22 02:39:09 pluto kernel: cpu0 (BSP): APIC ID: 3
Jun 22 02:39:09 pluto kernel: cpu1 (AP): APIC ID: 0
It looks like yesterday around 17:58's crash/reboot is when I lost the 2nd
CPU :(
I haven't seen any errors from iir0 since the 10th though ... does anyone
know what those mean?
On Fri, 23 Jun 2006, Marc G. Fournier wrote:
>
> Are there any known problems with FreeBSD 6.x and Dual PIII motherboards?
>
> My source tree is from May 25th ...
>
> I just noticed something while looking around my server, and there is no CPU1
> running, only CPU0 ... I definitely have SMP enabled in my kernel:
>
> # strings /boot/kernel/kernel | grep SMP
> SMP_prvspace
> SMPpt
> Correcting Natoma config for SMP
> Kernel SMP
> SMP has been disabled from the loader
> FreeBSD/SMP: Multiprocessor System Detected: %d CPUs
> SMP: CPU %d exceeds maximum CPU %d, ignoring
> SMP: Added CPU %d (%s)
> SMP: cpuid = %d
> SMP: actual apic_id = %d
> SMP: correct apic_id = %d
> SMP: AP CPU #%d Launched!
> SMP: tlb shootdown to %d other cpus (only have %d)
> Indicates whether the TSC is safe to use in SMP mode
> npx0 cannot use IRQ 13 on an SMP system
> npx0 cannot be emulated on an SMP system
>
> but, as dmesg shows, no 2nd CPU is even being attempted to start:
>
> Copyright (c) 1992-2006 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD 6.1-STABLE #1: Sun Jun 18 00:01:02 ADT 2006
> root at pluto.hub.org:/usr/obj/usr/src/sys/kernel
> acpi_alloc_wakeup_handler: can't alloc wake memory
> ACPI APIC Table: <INTEL SCB20 >
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Pentium(R) III CPU - S 1266MHz (1263.45-MHz 686-class
> CPU)
> Origin = "GenuineIntel" Id = 0x6b4 Stepping = 4
> Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
> real memory = 4227792896 (4031 MB)
> avail memory = 4144308224 (3952 MB)
> ACPI-0698: *** Warning: Type override - [DEB_] had invalid type (Integer)
> for Scope operator, changed to (Scope)
> ACPI-0698: *** Warning: Type override - [MLIB] had invalid type (Integer)
> for Scope operator, changed to (Scope)
> ACPI-0698: *** Warning: Type override - [DATA] had invalid type (String)
> for Scope operator, changed to (Scope)
> ACPI-0698: *** Warning: Type override - [SIO_] had invalid type (String)
> for Scope operator, changed to (Scope)
> ACPI-0698: *** Warning: Type override - [SB__] had invalid type (String)
> for Scope operator, changed to (Scope)
> ACPI-0698: *** Warning: Type override - [PM__] had invalid type (String)
> for Scope operator, changed to (Scope)
> ACPI-0698: *** Warning: Type override - [ICNT] had invalid type (String)
> for Scope operator, changed to (Scope)
> ACPI-0698: *** Warning: Type override - [ACPI] had invalid type (String)
> for Scope operator, changed to (Scope)
> ACPI-0698: *** Warning: Type override - [LEDP] had invalid type (String)
> for Scope operator, changed to (Scope)
> ACPI-0698: *** Warning: Type override - [WUES] had invalid type (String)
> for Scope operator, changed to (Scope)
> ACPI-0698: *** Warning: Type override - [WUSE] had invalid type (String)
> for Scope operator, changed to (Scope)
> ACPI-0698: *** Warning: Type override - [CSB5] had invalid type (String)
> for Scope operator, changed to (Scope)
> ACPI-0698: *** Warning: Type override - [PM__] had invalid type (String)
> for Scope operator, changed to (Scope)
> ACPI-0698: *** Warning: Type override - [BIOS] had invalid type (Integer)
> for Scope operator, changed to (Scope)
> ACPI-0698: *** Warning: Type override - [CMOS] had invalid type (Integer)
> for Scope operator, changed to (Scope)
> MADT: Forcing active-low polarity and level trigger for SCI
> ioapic0 <Version 1.1> irqs 0-15 on motherboard
> ioapic1 <Version 1.1> irqs 16-31 on motherboard
> lapic3: Forcing LINT1 to edge trigger
> kbd1 at kbdmux0
> acpi0: <INTEL SCB20> on motherboard
> acpi0: Power Button (fixed)
> Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
> acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
> cpu0: <ACPI CPU> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pci0: <mass storage, RAID> at device 2.0 (no driver attached)
> fxp0: <Intel 82550 Pro/100 Ethernet> port 0x1480-0x14bf mem
> 0xfe790000-0xfe790fff,0xfe760000-0xfe77ffff irq 21 at device 3.0 on pci0
> miibus0: <MII bus> on fxp0
> inphy0: <i82555 10/100 media interface> on miibus0
> inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> fxp0: Ethernet address: 00:03:47:bd:67:66
> fxp1: <Intel 82550 Pro/100 Ethernet> port 0x14c0-0x14ff mem
> 0xfeac0000-0xfeac0fff,0xfeaa0000-0xfeabffff irq 20 at device 4.0 on pci0
> miibus1: <MII bus> on fxp1
> inphy1: <i82555 10/100 media interface> on miibus1
> inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> fxp1: Ethernet address: 00:03:47:bd:67:67
> pci0: <display, VGA> at device 12.0 (no driver attached)
> isab0: <PCI-ISA bridge> at device 15.0 on pci0
> isa0: <ISA bus> on isab0
> pci0: <mass storage, ATA> at device 15.1 (no driver attached)
> pci0: <serial bus, USB> at device 15.2 (no driver attached)
> pcib1: <ACPI Host-PCI bridge> on acpi0
> pci1: <ACPI PCI bus> on pcib1
> iir0: <Intel Integrated RAID Controller> mem 0xfc8f0000-0xfc8f3fff irq 30 at
> device 9.0 on pci1
> iir0: [GIANT-LOCKED]
> pcib2: <ACPI Host-PCI bridge> on acpi0
> pci2: <ACPI PCI bus> on pcib2
> orm0: <ISA Option ROMs> at iomem
> 0xc0000-0xc7fff,0xc8000-0xd0fff,0xd1000-0xd27ff,0xd2800-0xd3fff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> Timecounter "TSC" frequency 1263452709 Hz quality 800
> Timecounters tick every 1.000 msec
> Waiting 5 seconds for SCSI devices to settle
> ses0 at iir0 bus 1 target 6 lun 0
> ses0: <ESG-SHV SCA HSBP M16 0.05> Fixed Processor SCSI-2 device ses0: SAF-TE
> Compliant Device
> da0 at iir0 bus 2 target 0 lun 0
> da0: <Intel Host Drive #00 > Fixed Direct Access SCSI-2 device da0: Tagged
> Queueing Enabled
> da0: 174848MB (358088850 512 byte sectors: 255H 63S/T 22290C)
> Trying to mount root from ufs:/dev/da0s1a
>
> ----
> Marc G. Fournier Hub.Org Networking Services (http://www.hub.org)
> Email . scrappy at hub.org MSN . scrappy at hub.org
> Yahoo . yscrappy Skype: hub.org ICQ . 7615664
> _______________________________________________
> freebsd-stable at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"
>
----
Marc G. Fournier Hub.Org Networking Services (http://www.hub.org)
Email . scrappy at hub.org MSN . scrappy at hub.org
Yahoo . yscrappy Skype: hub.org ICQ . 7615664
More information about the freebsd-stable
mailing list