RELENG_6: serial console drops back from 115200 to 9600 baud

[Vivek Khera]

On Feb 25, 2006, at 9:14 PM, Ed Maste wrote:

> Thus, I'm not surprised that you get a 9600 baud console without
> an rc.conf setting.  The thing that concerns me is your report that
> the console does not run at 115200 even if /boot/loader.conf
> contains comconsole_speed="115200".

I get a 9600 baud console with the following after upgrade from 5.4:

in make.conf:
BOOT_COMCONSOLE_SPEED=115200

in kernel config:
options         CONSPEED=115200 # Speed for serial console

/boot.config has just "-Dh"

/boot/loader.conf just disables ACPI timer.

The BIOS boots to 115200 serial output, too.