RELENG_6: serial console drops back from 115200 to 9600 baud

[Ed Maste]

On Sun, Feb 26, 2006 at 12:23:59AM +0100, Dimitry Andric wrote:

> > comconsole_speed="115200" in loader.conf should override it
> > if you don't want to replace boot2 or change /boot.config.
> 
> Yes, I've tried this, but it didn't work, or maybe I just didn't try
> hard enough. :)  I'll try it again with the 1.10.10.1 rev of comconsole.c.

I've just rebuilt a fresh RELENG_6 and installed the GENERIC
bootblocks, which default to 9600 baud.  I get a serial loader console
at 115200 baud under each of the following conditions:

/boot.config contains -h -S115200
/boot/loader.conf empty

/boot.config contains -h
/boot/loader.conf contains comconsole_speed="115200"

/boot.config empty
/boot/loader.conf contains console="comconsole" and comconsole_speed="115200"

What's in your /boot.config?  Are your bootblocks from the 6.1 beta as
well, or from a previous install?

-ed