umass device

[Robert Uzzi]

> Hi.
> I have strange problem with 6.0-STABLE and USB flash
> drive (Transcend JetFlash 1Gb). My work bsd-box is online
> and powered 24/7 and almost every day I plug in my USB drive,
> mount and work with it. But sometimes, after 3-4 days of
> uptime, USB just freezes: I can see non-blinking led indicator
> on flash drive when I plug it in, but I can see it via `camcontrol
> devlist`.
>
> However, I can't see /dev/da0 and can't do anything with flash drive
> (camcontrol rescan, eject/load give no results). Some times
> system just reboots after removing flash drive from USB port _and_
> typing `camcontrol devlist` or `camcontrol reset all`.
>
> BTW, how should I remove flash drive properly? Is it necessary
> to do `camcontrol eject x:x:x` before removing? I always did this
> earlier, but for test purposes I skip this command for last
> several days, and I see no difference.
>
> There are no other USB devices (like mouse, keyboard, etc.)
>
> My kernel config is attached.
>
> PS: I have cvsup'ed (with RELENG_6 cvs tag) yesterday and now
> `uname -r` shows "6.1-PRERELEASE" instead of "6.0-STABLE".
> Is it ok? Are they same?
>
> --
> Andrew
> _______________________________________________
> freebsd-stable at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"

I've seen similar behavior with umass and 5.4, maybe is's not limited to 6?