5.4 -> 6.0 buildworld failure
Anthony Chavez
acc at anthonychavez.org
Mon Feb 6 02:21:43 PST 2006
Markus and freebsd-stable:
I have encountered a situation exactly the same as the one described in
this thread when attempting a source upgrade from 5.4-RELEASE-p4 to
6.0-RELEASE-p4.
I have had nothing but success on 10 other machines that were initially
running 5.4-RELEASE, 5.4-RELEASE, -p6, and -p8. Each of these machines
has a unique hardware configuration, and the one that fails to
buildworld is no exception.
I have tried an empty /etc/make.conf as well as specifically including
"CFLAGS=-O -pipe" therein. I have also tried a default /etc/profile.
The build still fails.
I'm thinking that the best course of action might be to upgrade to
5.4-RELEASE-p11 (which builds successfully), but I'm very interested to
know what's causing this error in case my intended course of action
doesn't work. The commit logs show no changes for this particular file
since well before this problem was reported, so the problem must have
lied somewhere else in the source tree.
Any ideas what could be causing this? Am I on the right track? I have
included my dmesg.boot below.
Cheers!
On Sat, 05 Nov 2005 23:49:34 +0100 Markus Buretorp <markus.buretorp at home.se> wrote:
> Peter Jeremy wrote:
>
>>On Sat, 2005-Nov-05 21:17:58 +0100, Markus Buretorp wrote:
>>
>>> I'm trying to upgrade from FreeBSD 5.4-STABLE to 6.0. I've done a
>>> cvsup to RELENG_6 and RELENG_6_0, I've ran make cleanworld, make
>>> clean, rm -rf /usr/obj/*, etc; but nothing helps.
>>>
>>>...
>>>
>>> /usr/src/lib/libkvm/kvm_proc.c:108: error: storage size of 't_cdev'
>>> isn't known
>>
>>Where is this error occurring during the buildworld? (What are the
>>latest lines beginning '>>>' and '===>')
>>What non-standard bits do you have in your command line, /etc/make.conf
>>or MAKEOBJDIRPREFIX?
>
> >>> stage 4.2: building libraries
> ...
> ===> lib/libkvm (depend,all,install)
>
> make.conf:
>
> WITHOUT_X11=yes
> CPUTYPE?=athlon-xp
> CFLAGS=-O2 -pipe
> COPTFLAGS=-O -pipe
> # added by use.perl 2005-06-24 23:01:50
> PERL_VER=5.8.7
> PERL_VERSION=5.8.7
>
> Note, I've tried without the first four lines.
>
> $ cd lib/libkvm
> /usr/src [root at jmb]
> $ make
> ...r/src/lib/libkvm [root at jmb]
> cc -O -pipe -DLIBC_SCCS -I/usr/src/lib/libkvm -c
> /usr/src/lib/libkvm/kvm_proc.c
> /usr/src/lib/libkvm/kvm_proc.c: In function `kvm_proclist':
> /usr/src/lib/libkvm/kvm_proc.c:108: error: storage size of 't_cdev'
> isn't known
> /usr/src/lib/libkvm/kvm_proc.c:114: error: storage size of 'pr'
> isn't known
> /usr/src/lib/libkvm/kvm_proc.c:176: error: structure has no member
> named `ki_jid'
> /usr/src/lib/libkvm/kvm_proc.c:377: error: structure has no member
> named `p_rux'
> *** Error code 1
>
> Stop in /usr/src/lib/libkvm.
>
> I found this, http://www.freebsd.org/cgi/query-pr.cgi?pr=77821 , but
> it doesn't help me much. I don't now what I've done. I've used cvsup
> and buildworld several times.
--
Anthony Chavez http://anthonychavez.org/
mailto:acc at anthonychavez.org jabber:acc at jabber.anthonychavez.org
--8<---------------cut here---------------start------------->8---
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RELEASE-p4 #1: Sun Sep 11 20:13:50 MDT 2005
root at mybox.mydomain.com:/usr/obj/usr/src/sys/MYBOX
WARNING: debug.mpsafenet forced to 0 as ipsec requires Giant
WARNING: MPSAFE network stack disabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (3010.67-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf41 Stepping = 1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 1073414144 (1023 MB)
avail memory = 1040855040 (992 MB)
ACPI APIC Table: <A M I OEMAPIC >
ioapic0 <Version 2.0> irqs 0-23 on motherboard
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <A M I OEMRSDT> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib1
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0xb880-0xb89f irq 23 at device 29.0 on pci0
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0xbc00-0xbc1f irq 19 at device 29.1 on pci0
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0xc000-0xc01f irq 18 at device 29.2 on pci0
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0xc080-0xc09f irq 16 at device 29.3 on pci0
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib2
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xd880-0xd8ff mem 0xd7fef800-0xd7fef87f irq 17 at device 9.0 on pci1
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:01:02:43:87:6c
xl1: <3Com 3c905B-TX Fast Etherlink XL> port 0xdc00-0xdc7f mem 0xd7fefc00-0xd7fefc7f irq 21 at device 10.0 on pci1
miibus1: <MII bus> on xl1
xlphy1: <3Com internal media interface> on miibus1
xlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl1: Ethernet address: 00:50:da:1e:f2:34
pci1: <display, VGA> at device 11.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 UDMA100 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
atapci1: <Intel ICH6 SATA150 controller> port 0xc400-0xc40f,0xc480-0xc483,0xc800-0xc807,0xc880-0xc883,0xcc00-0xcc07 irq 19 at device 31.2 on pci0
ata2: channel #0 on atapci1
ata3: channel #1 on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff on isa0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
uhid0: American Power Conversion Back-UPS RS 1000 FW:7.g8 .D USB FW:g8, rev 1.10/1.06, addr 2, iclass 3/0
Timecounter "TSC" frequency 3010667573 Hz quality 800
Timecounters tick every 10.000 msec
IPsec: Initialized Security Association Processing.
acd0: CDRW <LITE-ON DVD+RW LDW-401S/ES0G> at ata0-master PIO4
ad1: 239372MB <Maxtor 7Y250P0/YAR41BW0> [486344/16/63] at ata0-slave UDMA100
ad4: 114473MB <WDC WD1200JD-00HBB0/08.02D08> [232581/16/63] at ata2-master SATA150
ad5: 286188MB <Maxtor 6L300S0/BANC1E00> [581463/16/63] at ata2-slave SATA150
ad6: 286188MB <Maxtor 6L300S0/BANC1E00> [581463/16/63] at ata3-master SATA150
ad7: 286188MB <Maxtor 6L300S0/BANC1E00> [581463/16/63] at ata3-slave SATA150
GEOM_RAID3: Device data created (id=3217021508).
GEOM_RAID3: Device data: provider ad5 detected.
GEOM_RAID3: Device data: provider ad6 detected.
GEOM_RAID3: Device data: provider ad7 detected.
GEOM_RAID3: Device data: provider ad5 activated.
GEOM_RAID3: Device data: provider ad6 activated.
GEOM_RAID3: Device data: provider ad7 activated.
GEOM_RAID3: Device data: provider raid3/data launched.
Mounting root from ufs:/dev/ad4s1a
--8<---------------cut here---------------end--------------->8---
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 477 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20060206/65d8bc3c/attachment.bin
More information about the freebsd-stable
mailing list