ath0 timeout problem - again

JoaoBR joao at matik.com.br
Fri Dec 29 04:04:25 PST 2006


On Thursday 28 December 2006 21:52, you wrote:
> check this message:
>
> http://lists.freebsd.org/pipermail/freebsd-stable/2006-December/031216.html
>
> run "/usr/src/tools/tools/net80211/wlandebug/wlandebug -i ath0 power" and
> see if one of the hosts on your wlan has powersaving turned on.
>
> "stops forever" was not one of my symptoms though, so your issue may be
> different...
>


thank's for your answer
powersaving is not the issue here because it's off

But I saw histories about this and even if powersaving issue "was the issue in 
that case(really?)" I think this is wierd in any way because if ONE station 
with powersaving on could set the AP in DoS ... man ... if really true this 
is kind of lame excuse or kind of driver weakness which both would be 
inacceptable, and, if it does NOT wake up if in sleep state ... no further 
comment, but a driver weakness right?

wether powersaving is on or not on the station/client  is a local setting to 
this station  and must not influence any remote computer in any way, imagine, 
you turn on your powersavings and the complete internet goes down on your 
request hihihihi :)

but then, like my case, on the AP or better ath in ap mode, even IF 
powersaving is ON it might stop working for any related reason but firstable 
NOT WHILE TX/RX and secondable if idle it must return soon THIS computer 
wants to transmit any kind of traffic again

 last but not least powersaving might shut the power down but must return when 
necessary - if not - there is a driver problem.


João







> On Thu, 28 Dec 2006, JoaoBR wrote:
> > I need some help here, this is not a single case, I get this on a several
> > machines, this is releng_6 , recent, but old problem getting ugly
> >
> >
> > first I get this kind of events in messages, independent if it is client
> > mode or hostap or adhoc
> >
> > Dec 28 16:50:53 ap1-cds kernel: ath0: discard oversize frame (ether type
> > 5e4 flags 3 len 1522 > max 1514)
> > Dec 28 16:51:01 ap1-cds kernel: ath0: discard oversize frame (ether type
> > 5e4 flags 3 len 1522 > max 1514)
> > Dec 28 16:58:16 ap1-cds kernel: ath0: device timeout
> > ... timeout event repeats
> >
> > I really do not know what this event means (ether type 5e4), for my
> > understandings it is vague in the source, so I am lost here
> >
> > {
> > I get continously:
> >
> > kernel: ath0: link state changed to DOWN
> > kernel: ath0: link state changed to UP
> >
> > when WL client but it recovers when the AP comes back to normal
> > so wl-cli mode is not the issue
> > }
> >
> >
> > but when the machine is running hostap the link state up/down events do
> > not come up but transmission is interrupted, or better, goes slow and
> > stops then - and stops forever until cold reboot, no chance to get this
> > card back, not even unload ath and reload the driver (that was a try but
> > I use it compiled into the kernel)
> > this is not related to any WEP settings or any rate, this problem is
> > coming up with either rate-sample or rate_onoe
> >
> >
> > this is not related to the "tx stopped" problem (OACTIVE) and it is not
> > related to any [TX|RX]BUF value (whatever it is set to)
> >
> > this problem is not a single case and not hardware related, here I mean
> > MB, CPU, memory but is related in a certain way to the ath drv - same
> > machine, but wi0 (prism card) and it does NOT happen this way
> >
> >
> > I am with this problem since 6.0 and would be glad if somebody could
> > convince Mr. Sam L.  to attend this since it is a serious issue - any
> > FreeBSD releng_6 has this problem but releng_5 does not
> >
> > depending on the amount of traffic I get this any hour ( when 2-3Mbit/s
> > or more) or several times a day (when 1-2Mbit/s)
> >
> > it get worse when I have more then one ath card installed
> >
> >
> > ath stats:
> >
> > 70777 data frames received
> > 71551 data frames transmit
> > 420 tx frames with an alternate rate
> > 10821 long on-chip tx retries
> > 260 tx failed 'cuz too many retries
> > 11M current transmit rate
> > 10489 tx management frames
> > 1 tx frames discarded prior to association
> > 786 tx frames with no ack marked
> > 80516 tx frames with short preamble
> > 54395 rx failed 'cuz of bad CRC
> > 146438 rx failed 'cuz of PHY err
> >    145013 CCK timing
> >    1425 CCK restart
> > 5295 beacons transmitted
> > 19 periodic calibrations
> > 42 rssi of last ack
> > 31 avg recv rssi
> > -98 rx noise floor
> > 572 cabq frames transmitted
> > 11 cabq xmit overflowed beacon interval
> > 1525 switched default/rx antenna
> > Antenna profile:
> > [1] tx    41285 rx    4
> >
> >
> > ifconfig
> >
> > ath0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
> >        ether 00:13:46:8b:f1:86
> >        media: IEEE 802.11 Wireless Ethernet DS/11Mbps mode 11b <hostap>
> >        status: associated
> >        ssid omegasul channel 1 (2412) bssid 00:13:46:8b:f1:86
> >        authmode OPEN privacy ON deftxkey 1
> >        wepkey 1:40-bit
> >        wepkey 2:40-bit
> >        wepkey 3:40-bit
> >        wepkey 4:40-bit powersavemode OFF powersavesleep 100 txpowmax 36
> >        txpower 63 rtsthreshold 2346 mcastrate 1 fragthreshold 2346 bmiss
> > 7 -pureg protmode CTS -wme burst ssid HIDE -apbridge dtimperiod 1 bintval
> > 100
> >
> >
> >
> >
> > --
> > thank's
> > João
> >
> >
> >
> >
> >
> >
> >
> > A mensagem foi scaneada pelo sistema de e-mail e pode ser considerada
> > segura. Service fornecido pelo Datacenter Matik 
> > https://datacenter.matik.com.br
> > _______________________________________________
> > freebsd-stable at freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> > To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"

-- 

João







A mensagem foi scaneada pelo sistema de e-mail e pode ser considerada segura.
Service fornecido pelo Datacenter Matik  https://datacenter.matik.com.br


More information about the freebsd-stable mailing list