FreeBSD 6.1-STABLE: Unexplained power off

Thu Aug 17 06:50:51 UTC 2006

you have ichwd ... what settings in bios and on motherboard related to
watchdog?

2006/8/17, Android Andrew [:] <android at oberon.pfi.lt>:
>
> Thank you for answers!
>
> Yesterday the last iteration of high load testing finished with just
> another power off.
> There are two ways of problem-solving have been outlined in this thread.
> One way - hardware problem, e.g. PSU.
> Another way - software, e.g. APM/ACPI problem.
>
> I could not find any PSU for replacement at this moment. So, I've been
> playing with BIOS and kernel options. I disabled "dynamic overclocking",
> hyperthreading options in BIOS. There's no "Disable APM" (or something
> like this) or "Disable ACPI" in my BIOS. I can only disable some ACPI
> functions or extensions (like "Enable ACPI 2 extensions"). I've
> recompiled kernel without apm/acpi options and without SMP support.
>
> I was typing "After recompilation system is still working without
> crashing" when system just turned off.... :)
>
>
> my loader.conf:
> loader_logo="beastie"
> if_myk_load="YES"
> nvidia_load="YES"
>
> sysctl.conf:
> net.inet.tcp.msl=7500
> net.inet.udp.blackhole=1
> net.inet.ip.random_id=1
> kern.ipc.somaxconn=4096
> net.inet.icmp.icmplim=100
>
> last dmesg:
> Copyright (c) 1992-2006 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights reserved.
> FreeBSD 6.1-STABLE #8: Wed Aug 16 21:11:42 EEST 2006
>     root at callisto:/usr/obj/usr/src/sys/callisto
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (3010.67-MHz 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0xf43  Stepping = 3
>
>
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>   Features2=0x649d<SSE3,RSVD2,MON,DS_CPL,EST,CNTX-ID,CX16,<b14>>
>   AMD Features=0x20100000<NX,LM>
> real memory  = 2147090432 (2047 MB)
> avail memory = 2092273664 (1995 MB)
> kbd1 at kbdmux0
> ichwd module loaded
> acpi0: <A M I OEMRSDT> on motherboard
> acpi_bus_number: can't get _ADR
> acpi_bus_number: can't get _ADR
> acpi_bus_number: can't get _ADR
> acpi_bus_number: can't get _ADR
> acpi_bus_number: can't get _ADR
> acpi_bus_number: can't get _ADR
> acpi0: Power Button (fixed)
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
> cpu0: <ACPI CPU> on acpi0
>    ACPI-1304: *** Error: Method execution failed [\\_PR_.CPU1._PDC]
> (Node 0xc5c81c60), AE_BAD_HEADER
> acpi_throttle0: <ACPI CPU Throttling> on cpu0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> irq 11 at device 1.0 on pci0
> pci4: <ACPI PCI bus> on pcib1
> nvidia0: <GeForce 6600> mem
> 0xd4000000-0xd7ffffff,0xd8000000-0xdfffffff,0xd3000000-0xd3ffffff irq 11
> at device 0.0 on pci4
> nvidia0: [GIANT-LOCKED]
> pci0: <multimedia> at device 27.0 (no driver attached)
> pcib2: <ACPI PCI-PCI bridge> irq 11 at device 28.0 on pci0
> pci3: <ACPI PCI bus> on pcib2
> pcib3: <ACPI PCI-PCI bridge> irq 10 at device 28.3 on pci0
> pci2: <ACPI PCI bus> on pcib3
> myk0: <Marvell 88E8053 Gigabit Ethernet Controller, Ver. 8.12.2.3> port
> 0xc800-0xc8ff mem 0xd2efc000-0xd2efffff irq 10 at device 0.0 on pci2
> myk0: Ethernet address: 00:13:d4:d0:31:e5
> uhci0: <UHCI (generic) USB controller> port 0x8000-0x801f irq 5 at
> device 29.0 on pci0
> uhci0: [GIANT-LOCKED]
> usb0: <UHCI (generic) USB controller> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <UHCI (generic) USB controller> port 0x8400-0x841f irq 11 at
> device 29.1 on pci0
> uhci1: [GIANT-LOCKED]
> usb1: <UHCI (generic) USB controller> on uhci1
> usb1: USB revision 1.0
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2: <UHCI (generic) USB controller> port 0x8800-0x881f irq 3 at
> device 29.2 on pci0
> uhci2: [GIANT-LOCKED]
> usb2: <UHCI (generic) USB controller> on uhci2
> usb2: USB revision 1.0
> uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> uhci3: <UHCI (generic) USB controller> port 0x9000-0x901f irq 10 at
> device 29.3 on pci0
> uhci3: [GIANT-LOCKED]
> usb3: <UHCI (generic) USB controller> on uhci3
> usb3: USB revision 1.0
> uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem
> 0xd2dff800-0xd2dffbff irq 5 at device 29.7 on pci0
> ehci0: [GIANT-LOCKED]
> usb4: EHCI version 1.0
> usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
> usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
> usb4: USB revision 2.0
> uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub4: 8 ports with 8 removable, self powered
> uhub4: device problem (IOERROR), disabling port 7
> pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci1: <ACPI PCI bus> on pcib4
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH7 UDMA100 controller> port
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
> ata0: <ATA channel 0> on atapci0
> ata1: <ATA channel 1> on atapci0
> atapci1: <Intel ICH7 SATA300 controller> port
> 0xa800-0xa807,0xa400-0xa403,0xa000-0xa007,0x9800-0x9803,0x9400-0x940f
> mem 0xd2dffc00-0xd2dfffff irq 11 at device 31.2 on pci0
> ata2: <ATA channel 0> on atapci1
> ata3: <ATA channel 1> on atapci1
> ata4: <ATA channel 2> on atapci1
> ata5: <ATA channel 3> on atapci1
> ichsmb0: <SMBus controller> port 0x400-0x41f irq 11 at device 31.3 on pci0
> ichsmb0: [GIANT-LOCKED]
> smbus0: <System Management Bus> on ichsmb0
> smb0: <SMBus generic I/O> on smbus0
> acpi_button0: <Power Button> on acpi0
> speaker0: <PC speaker> port 0x61 on acpi0
> fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2
> on acpi0
> fdc0: [FAST]
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq
> 3 on acpi0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/9 bytes threshold
> ppbus0: <Parallel port bus> on ppc0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
> acpi0
> sio0: type 16550A
> ichwd0: <Intel ICH5 watchdog timer> on isa0
> orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> fb0 at vga0
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> ukbd0: Key Tronic Keytronic USB Keyboard, rev 1.10/1.02, addr 2, iclass
> 3/1
> kbd2 at ukbd0
> ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/20.00, addr 3, iclass 3/1
> ums0: 4 buttons and Z dir.
> Timecounter "TSC" frequency 3010671825 Hz quality 800
> Timecounters tick every 1.000 msec
> ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding
> enabled, default to deny, logging limited to 100 packets/entry by default
> acd0: DVDR <PIONEER DVD-RW DVR-111D/1.19> at ata0-master UDMA66
> ad4: 114473MB <Seagate ST3120813AS 2AAA> at ata2-master SATA300
> ad6: 114473MB <Seagate ST3120813AS 2AAA> at ata3-master SATA300
> ar0: 228942MB <Intel MatrixRAID RAID0 (stripe 128 KB)> status: READY
> ar0: disk0 READY using ad4 at ata2-master
> ar0: disk1 READY using ad6 at ata3-master
> cd0 at ata0 bus 0 target 0 lun 0
> cd0: <PIONEER DVD-RW  DVR-111D 1.19> Removable CD-ROM SCSI-0 device
> cd0: 66.000MB/s transfers
> cd0: Attempt to query device size failed: NOT READY, Medium not present
> Trying to mount root from ufs:/dev/ar0s1a
> myk0: link up
> oss: Out of mixer extensions for device 0
>
>
> Ian Smith wrote:
> > On Tue, 15 Aug 2006, Christian Walther wrote:
> >
> >  > This is just a wild, uneducated guess, because I'm not a long FreeBSD
> >  > user, but from my point of view this error could really be related to
> >  > ACPI/APM, as already has been suggested.
> >
> > It smells a bit that way to me too.  I've just read the whole thread,
> > but going back to the original post's kernel conf, android had APM and
> > apm_saver in there, but the dmesg confirmed an ACPI boot, complete with
> > a complaint by apm_saver refusing to load because APM wasn't loaded.  As
> > it never is if ACPI is loaded, as I understand it.  (caveat: 5.5-STABLE)
> >
> > android also mentioned trying to do things with APM settings in BIOS.  I
> > suspect APM should be _disabled_ in BIOS, and ACPI enabled, with ACPI
> > power (etc) management used instead .. someone correct me if I'm wrong;
> > I'm really unsure how much APM functional emulation remains in ACPI?
> >
> >  > Maybe the machine is trying to go to suspend, but fails while doing
> >  > so, which in the end would mean that it can't recover from the
> >  > suspend, but has to reboot completely, resulting in dirty file
> >  > systems. It wouldn't reach the suspend state correctly, which could
> >  > leave everything depending on ACPI/APM in a undefined state,
> including
> >  > the hardware. This would explain why the machine has to be turned off
> >  > properly by pressing toe power button for such a long time.
> >
> > Maybe.  If APM is enabled in BIOS, but not loaded, could spell trouble.
> >
> >  > I'd try to use the machine without ACPI/APM enabled. If possible,
> >  > compile a new kernel without it being enabled. This might not be
> >  > possible because you're on a SMP-system, thou, but you might want to
> >  > check your configuration files for suspend or hibernation -- and turn
> >  > them of.
> >
> > Well it won't likely work with _neither_ enabled, and I suspect you're
> > right about SMP needing ACPI.  android suggested failure to boot with
> > neither enabled, which sounds likely.  What's in /boot/loader.conf?
> >
> > Cheers, Ian
> >
> >  > With ACPI/APM turned on, leave the machine idle for some time and see
> >  > if it shows the same behaviour. When it shuts down cleanly it's
> likely
> >  > that suspend/hibernation fails due to the high load introduced by the
> >  > build process.
> >  >
> >  > I've seen and experienced similar problems on other platforms, such
> as
> >  > OS X and (sorry) Linux.
> >
> >
>
> _______________________________________________
> freebsd-stable at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"
>