Intel EtherExpress Pro ISA card

[Vladimir Botka]

Just one more note:
modify /boot/device.hints to explicitely specify irq,dma and address.

  -vlado

On Sun, 23 Apr 2006, Joseph Olatt wrote:

> On Sat, Apr 22, 2006 at 09:11:24PM +0400, Igor Pokrovsky wrote:
>> On Fri, Apr 21, 2006 at 01:20:11PM -0400, Matt Smith wrote:
>>> I have this card install in a System but the GENERIC kernel does not pick it
>>> up.  Is there a custom driver for this card or a step I'm missing.
>>
>> If this is non-PNP card you have to specify irq and dma explicitely.
>>
>> -ip
>
>
> If the card you have is:
> EtherExpress PRO/10 or PRO/10+ ISA adapter
>
> then, I suspect you need to use the Intel supplied configuration utility
> to set the irq and dma. The utility can be found on the Intel site. The
> link is:
>
> http://downloadfinder.intel.com/scripts-df-external/T8Clearance.aspx?url=/2419/eng/e10disk.exe&agr=N&ProductID=248&DwnldID=2419&lang=eng
>
>
> _______________________________________________
> freebsd-stable at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"
>
>